Alex Chekholko schrieb:
> Doesn't your config do exactly what you want?
>
> > > Storage {
> > > Name = Neo4100
> > > Address = ....
> > > SDPort = 9103
> > > Password = "wiped"
> > > Device = Neo4100
> > > Media Type = LTO4
> > > Autochanger = yes
> > > Heartbeat Interval = 5min
> > > Maximum Concurrent Jobs = 3
> > > }
> > >
> > > Storage {
> > > Name = Neo4100-LTO4-D1
> > > Address = ....
> > > SDPort = 9103
> > > Password = "wiped"
> > > Device = ULTRIUM-TD4-D1
> > > Media Type = LTO4
> > > Maximum Concurrent Jobs = 1
>
> I also have a library with 3 drives. Looking at my config, I have it
> set to 3 in my Device in bacula-dir.conf and 20 in my Storage in
> bacula-sd.conf
So your config for the changer is the same?
I tried the above config, but bacula started 2 concurrent jobs on the
same _drive._ Both jobs use the same pool. I can't use spooling,
because the jobs are each backing up ~10 TB of data. Spooling would
just take too much time. So both jobs write to the same tape and I
would like to avoid this.
> # grep Maximum /etc/bacula/bacula-*.conf
> /etc/bacula/bacula-dir.conf: Maximum Concurrent Jobs = 3
> /etc/bacula/bacula-dir.conf: Maximum Concurrent Jobs = 3
> /etc/bacula/bacula-fd.conf: Maximum Concurrent Jobs = 20
> /etc/bacula/bacula-sd.conf: Maximum Concurrent Jobs = 20
>
> That lets the director run a max of three jobs at once, and it runs one
> each on my three drives.
Different pools for each job maybe?
Ralf
------------------------------------------------------------------------------
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without you. Join us at MIX09 to help
pave the way to the Next Web now. Learn more and register at
http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
