Hi,
I have a 3 drive autochanger (bacula 2.2.8). Right now I configure
each job to use one of the 3 drives, not the changer device.
Storage {
Name = Neo4100
Address = ....
SDPort = 9103
Password = "wiped"
Device = Neo4100
Media Type = LTO4
Autochanger = yes
Heartbeat Interval = 5min
Maximum Concurrent Jobs = 3
}
Storage {
Name = Neo4100-LTO4-D1
Address = ....
SDPort = 9103
Password = "wiped"
Device = ULTRIUM-TD4-D1
Media Type = LTO4
Maximum Concurrent Jobs = 1
[2 more drives]
And in the client's job config I then use
Storage = Neo4100-LTO4-D1
or
Storage = Neo4100-LTO4-D2
Now I would like to go back to the more typical bacula approach, where I use
the changer device in the client's job config.
But I don't want concurrent jobs running on each drive. I want that it's
possible to run 3 jobs on the changer (one for each drive), but only one on
each drive at the same time.
I could achieve that with different Priorities, but then these jobs are
blocking jobs which are using other storage devices.
Any ideas?
Ralf
------------------------------------------------------------------------------
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without you. Join us at MIX09 to help
pave the way to the Next Web now. Learn more and register at
http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
