Hi!
On Thu, Nov 6, 2008 at 8:16 AM, Dan Langille <[EMAIL PROTECTED]> wrote:
> On Nov 6, 2008, at 7:12 AM, Jose Ildefonso Camargo Tolosa wrote:
>
> Hi!
>>
>> On Thu, Nov 6, 2008 at 12:35 AM, Dan Langille <[EMAIL PROTECTED]> wrote:
>> Here is how I do different IP for the same SD. In my case, remote clients
>> access the SD via the gateway (public IP address which is forwarded
>> from my gateway to the SD) and local clients access the local IP address
>> (in the 192.168. block).
>>
>> I have slightly altered this config from my actual, but it should
>> illustrate how
>> to do this.
>>
>> From bacula-dir.conf
>>
>> Storage {
>> Name = DLTRemoteTLS
>> Address = storage1.example.org
>> SDPort = 9103
>> Device = DLT
>> Media Type = DLT
>> }
>>
>> # Definition of DLT tape storage device
>> Storage {
>> Name = DLT
>> Address = bacula.example.org
>> SDPort = 9103
>>
>> Device = DLT
>> Media Type = DLT
>> }
>>
>> That's it. Note that both Storage resources refer to the same Device.
>> Both Storage resources have different Address values. Use FQDN
>> and point each to different IP addresses.
>>
>> In my case, bacula.example.org points to 192.168.1.12 and
>> DLTRemoteTLD refers to storage1.example.org, which is a public IP
>> address.
>>
>> Then in bacula-sd.conf, I define the DLT device.
>>
>> Device {
>> Name = DLT
>> Description = QUANTUM DLT7000 1624
>> Media Type = DLT
>> Archive Device = /dev/nsa0
>> }
>>
>> Nothing special. But it's clever. Someone else showed me how to do it.
>>
>> Does that give you something to think about?
>>
>> Sure it does: docs needs updating!
>>
>
> In what way? I already stated this was documented. Here. I found it for
> you:
>
> http://www.bacula.org/en/rel-manual/Dealing_with_Firewalls.html
I just read it... it won't work, because I have all the servers en the same
network. The best bet is to "play around" with *local* name resolution (ie,
/etc/hosts or lmhosts), which can prove to be annoying.
Also, according to the doc you just gave, it says that using two different
Storage resources, no longer works:
"The following discussion was originally written by Jesse Guardiani because
he has 'internal' and 'external' requiring the Director and the Client to
use different IP addresses. His original solution was to define two
different Storage resources in the Director's conf file each pointing to the
same Storage daemon but with different IP addresses. In Bacula 1.38.x this
no longer works, because Bacula makes a one-to-one association between a
Storage daemon resource and a Device (such as an Autochanger). As a
consequence, I have modified his original text to a method that I believe
will work, but is as of yet untested (KES - July 2006)."
Duh....
> <http://www.bacula.org/en/rel-manual/Dealing_with_Firewalls.html>
>
> The thing is: can you run two backup jobs at the same time, one on each
>> storage address? (I think there should be no problem).
>>
>
> I'm sure you can. It is merely a concurrent job. Why ask when you can
> try? :)
Because it is easier? :) It was almost midnight by the time I wrote that.
>
>
> --
> Dan Langille
> http://langille.org/
>
>
Ildefonso Camargo
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
