John Drescher wrote: > On Thu, Oct 30, 2008 at 3:34 PM, Bob Hetzel <[EMAIL PROTECTED]> wrote: >> Greetings, >> >> I've got a PowerVault 136T autochanger. I was running well with two >> drives up until recently but I've now added a 3rd drive and seem to be >> having 1 problem more often now. The problem I'm seeing is that it'll >> load 3 tapes but then sometimes pick a drive it wants to run a specific >> backup on but it'll want a tape that's loaded into a different drive, >> then just sit there waiting for a mount request. I've noticed other >> times when it does the unmount/mount properly (although ideally it >> shouldn't switch drives at all I'd think if a tape it wants is mounted >> already in any drive and that drive isn't busy). I went from seeing >> this every month or so to now seeing this twice in the last week. >> >> Here's more info on the settings I'm using... >> all 3 drives in one pool >> prefer mounted volumes=no >> Maximum Concurrent Jobs=12 >> spool data=yes >> >> Is there anybody else who's started gathering/reporting debug logs on this? >> > > Are you using bacula-2.4.2 or better? > > John
Oops, I meant to add that I'm using 2.4.3 actually. ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
