On Thu, Oct 30, 2008 at 3:34 PM, Bob Hetzel <[EMAIL PROTECTED]> wrote: > > Greetings, > > I've got a PowerVault 136T autochanger. I was running well with two > drives up until recently but I've now added a 3rd drive and seem to be > having 1 problem more often now. The problem I'm seeing is that it'll > load 3 tapes but then sometimes pick a drive it wants to run a specific > backup on but it'll want a tape that's loaded into a different drive, > then just sit there waiting for a mount request. I've noticed other > times when it does the unmount/mount properly (although ideally it > shouldn't switch drives at all I'd think if a tape it wants is mounted > already in any drive and that drive isn't busy). I went from seeing > this every month or so to now seeing this twice in the last week. > > Here's more info on the settings I'm using... > all 3 drives in one pool > prefer mounted volumes=no > Maximum Concurrent Jobs=12 > spool data=yes > > Is there anybody else who's started gathering/reporting debug logs on this? >
Are you using bacula-2.4.2 or better? John ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
