Can you send the full output of the label command.
list media
and your bacula-dir.conf (Passwords and hostname can be obscured).
                        Thanks -Jason

On Mon, 2008-02-25 at 14:39 -0800, Justin Francesconi wrote:
> Well, it turns out there was an issue with the bacula-dir.conf as
> stated.  It works fine and btape can mostly control the drive, except
> for every time I try to run a backup job to the tape, I get the
> following error:
> 
> Cannot find any appendable volumes. 
> Please use the "label"  command to create a new Volume for:
> 
> I have used both ./bconsole and ./btape to 'label' the tape.  Each
> time I label it, it says it was successful.  I have tried to rewind
> the tape, move the tape to the end of the medium, everything I can
> think of, and it keeps giving that same error.  What am I missing
> here?
> 
> Thanks.
> 
> -----Original Message----- 
> From: Jason A. Kates [mailto:[EMAIL PROTECTED] 
> Sent: Monday, February 25, 2008 9:47 AM 
> To: Justin Francesconi 
> Cc: 'bacula-users@lists.sourceforge.net' 
> Subject: Re: [Bacula-users] bacula tape drive can test but not use
> for 
> jobs
> 
> 
> 1st your conf files shouldn't be in /usr/local/bacula/bin
> 
> 2nd your bacula-sd.conf  may be fine it's the bacula-dir.conf  file
> that 
> you need to look at. 
>                         -Jason
> 
> On Mon, 2008-02-25 at 09:44 -0800, Justin Francesconi wrote: 
> > Basically, this snippet from the console sums it all up: 
> > ------------------------------------------- 
> > [EMAIL PROTECTED] bin]# ./btape 
> > -c /usr/local/bacula/bin/bacula-sd.conf /dev/nst0 
> > Tape block granularity is 1024 bytes. 
> > btape: butil.c:285 Using device: "/dev/nst0" for writing. 
> > btape: btape.c:368 open device "SonyDrive" (/dev/nst0): OK 
> > * 
> > [EMAIL PROTECTED] bin]# ./bacula start 
> > Starting the Bacula Storage daemon 
> > Starting the Bacula File daemon 
> > Starting the Bacula Director daemon 
> > 25-Feb 09:39 bacula-dir: ERROR TERMINATION at parse_conf.c:532 
> > Config error: Could not find config Resource "storage" referenced
> on 
> > line 44 :   Storage = SonyDrive 
> > 
> > 
> >             : line 44, col 22 of 
> > file /usr/local/bacula/bin/bacula-dir.conf 
> >   Storage = SonyDrive 
> > 
> > [EMAIL PROTECTED] bin]# ./btape 
> > -c /usr/local/bacula/bin/bacula-sd.conf /dev/nst0 
> > Tape block granularity is 1024 bytes. 
> > btape: butil.c:285 Using device: "/dev/nst0" for writing. 
> > 
> > [EMAIL PROTECTED] bin]# 
> > ---------------------------------------------- 
> > So, after reboot, you can basically follow what happens - run
> bacula 
> > tape test and it's able to communicate with the drive and provide
> the 
> > * to run the command 'test', which I have done, and it worked fine. 
> > However, as soon as  I start bacula, it suddenly doesn't like the 
> > sd.conf (which I thought needed to be correct anyways for btape to 
> > work), and after that fails, btape no longer works.  When I first
> try 
> > to start bacula, I hear the tape drive briefly spin and then it 
> > fails.  
> > 
> > What could be causing this?  
> > 
> > Thanks, 
> > 
> > Justin Francesconi 
> > 
> >
> ------------------------------------------------------------------------- 
> > This SF.net email is sponsored by: Microsoft 
> > Defy all challenges. Microsoft(R) Visual Studio 2008. 
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ 
> > _______________________________________________ Bacula-users mailing
> list Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
> 
> -- 
> ---------------------------------------------------------------------------- 
> Jason A. Kates ([EMAIL PROTECTED]) 
> Fax:    208-975-1514 
> Phone:  212-400-1670 x2 
> ============================================================================
> 
-- 
----------------------------------------------------------------------------
Jason A. Kates ([EMAIL PROTECTED]) 
Fax:    208-975-1514
Phone:  212-400-1670 x2
============================================================================



-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to