"Jensen, Brad" <[EMAIL PROTECTED]> kirjoitti viestissä news:[EMAIL PROTECTED] > > I have just installed Bacula 2.2.8 from RPMs downloaded from SourceForge > on Fedora 8. The Fedora 8 install is completely fresh and updated. The > RPMs I installed are as follows: > > The installs went without error, DB was created successfully and > populated. Per the instructions the first thing I attempted to do before > starting anything Bacula for the first time was to run the btape utility. > The command I ran and the errors/output that ensued are listed below: > > [EMAIL PROTECTED] BaculaFiles]# /usr/sbin/btape autochanger > Tape block granularity is 1024 bytes. > *** buffer overflow detected ***: /usr/sbin/btape terminated
> I had the same experience with Bacula 2.2.7 loading via RPMs. I am > running the following hardware with appropriate OS level drivers > installed: > > Any help anyone can give me would be immensely appreciated. I have tried > to google around and search the lists,etc., but have not found a solid > answer to this one yet. > Same problem here :-( I already posted to bacula-devel list... For a quick workaround, before a better solution: try downloading 2.2.7 binary rpms for Fedora 7 from Sourceforge, I got them working on Fedora 8. But anything (2.2.7 or 2.2.8) built on Fedora 8 seems to crash the same way. So, don't download a source rpm and build by yourself on F8, it leads to crash. Regards, Timo ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
