Hello,
13.12.2007 16:51,, Daniel Bareiro wrote::
> On Thursday, 13 December 2007 09:58:55 +0100,
> Arno Lehmann wrote:
>
>> Hi,
>
> Hi Arno. Thanks for your response.
>
>>> This is my first mail to the list. I'm newbie with Bacula.
>
>> I noticed that, when looking at the configuration ;-)
>
> The humor sense in a mailing list always is welcome :-)))
I hope didn't step on your toes...
>>> I'm using Bacula version (1.38.11-8) from Debian Etch for Sparc
>>> respositories.
>
>> I recommend upgrading to 2.2.6, even if that means installing from
>> source. 1.38 is really outdated by now.
>
> Yes, I thought that too. I keep it in mind for futures upgrades after
> this version turns operative.
>
>>> sparky:~# mtx -f /dev/sg2 status
>>> Storage Changer /dev/sg2:1 Drives, 8 Slots ( 0 Import/Export )
>
>> Keep this in mind... you've got one drive and 8 slots.
>
> Good. I took the slots as drives. I see the mistake.
>
>>> But checking the status storage from the Baculas's console delays long
>>> time without returns some results.
That's what usually happens when the SD was recently started - it
needs some time to settle its tape drive initialization.
>>> sparky:/etc/bacula# bconsole
>>> Connecting to Director sparky.educ.gov.ar:9101
>>> 1000 OK: maquinadirectora-dir Version: 1.38.11 (28 June 2006)
>>> Enter a period to cancel a command.
>>> *status
>>> Using default Catalog name=MyCatalog DB=bacula
>>> Status available for:
>>> 1: Director
>>> 2: Storage
>>> 3: Client
>>> 4: All
>>> Select daemon type for status (1-4): 2
>>> The defined Storage resources are:
>>> 1: respaldadora-sd
>>> 2: File
>>> Select Storage resource (1-2): 1
>>> Connecting to Storage daemon respaldadora-sd at sparky.educ.gov.ar:9103
>>> [ ... delays long time without returns some results ... ]
>
>> Really no output, it just returns to the '*' prompt?
>
> Well, really now I can see the following output after a long time. But
> this long delay only happened the first time I perform the 'status
> storage'. Later that, the result was instantaneous.
So that's ok.
...
> I modified the autochanger resource definition. Now, does it look
> better? :-)
>
> Autochanger {
> Name = Autochanger
> Device = Drive-1
> Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg2
> }
>
> Device {
> Name = Drive-1 #
> Media Type = DLT-7000
> Archive Device = /dev/nst0
> Autochanger = yes
> LabelMedia = no
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes
> }
Much better :-)
> This is the output of 'status storage':
>
> *status storage
> The defined Storage resources are:
> 1: respaldadora-sd
> 2: File
> Select Storage resource (1-2): 1
> Connecting to Storage daemon respaldadora-sd at sparky.educ.gov.ar:9103
>
> respaldadora-sd Version: 1.38.11 (28 June 2006) sparc-unknown-linux-gnu
> debian 4.0
> Daemon started 13-dic-07 06:33, 0 Jobs run since started.
>
> Running Jobs:
> No Jobs running.
> ====
>
> Jobs waiting to reserve a drive:
> ====
>
> Terminated Jobs:
> JobId Level Files Bytes Status Finished Name
> ======================================================================
> 1 Full 0 0 Other 11-dic-07 15:20 Backup_Usuarios
> 2 Full 0 0 Cancel 13-dic-07 01:17 Backup_Usuarios
> ====
>
> Device status:
> Autochanger "Autochanger" with devices:
> "Drive-1" (/dev/nst0)
> Device "FileStorage" (/tmp) is not open or does not exist.
> Device "Drive-1" (/dev/nst0) open but no Bacula volume is mounted.
> Slot 1 is loaded in drive 0.
> Total Bytes Read=0 Blocks Read=0 Bytes/block=0
> Positioned at File=0 Block=0
> ====
>
> In Use Volume status:
> ====
>
> Then, I try label the volumes but I got an input/output error message
> after a delay. Performing the operation over another slot shows the same
> error.
>
> The defined Storage resources are:
> 1: respaldadora-sd
> 2: File
> Select Storage resource (1-2): 1
> Enter autochanger drive[0]:
> Enter new Volume name: TestVolume1
> Enter slot (0 or Enter for none): 1
> Automatically selected Pool: Default
> Connecting to Storage daemon respaldadora-sd at sparky.educ.gov.ar:9103...
> Sending label command for Volume "TestVolume1" Slot 1 ...
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result: nothing loaded.
> 3304 Issuing autochanger "load slot 1, drive 0" command.
> 3305 Autochanger "load slot 1, drive 0", status is OK.
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result is Slot 1.
> 3301 Issuing autochanger "loaded drive 0" command.
> 3302 Autochanger "loaded drive 0", result is Slot 1.
> 3912 Failed to label Volume: ERR=dev.c:678 Rewind error on "Drive-1"
> (/dev/nst0). ERR=Error de entrada/salida.
>
> Label command failed for Volume TestVolume1.
> Do not forget to mount the drive!!!
>
> Any idea? The permissions are correct, I think.
>
> sparky:/etc/bacula# ll /dev/st0 /dev/sg2
> crw-rw---- 1 root tape 21, 2 2007-12-12 11:54 /dev/sg2
> crw-rw---- 1 root tape 9, 0 2007-12-12 11:54 /dev/st0
These look good.
> sparky:/etc/bacula# id bacula
> uid=105(bacula) gid=105(bacula) grupos=105(bacula),26(tape)
And fit quite well to this.
It might be that, after loading a tape, the tape drive needs more time
to settle to working conditions. DLT can take up to a few minutes...
in mtx-changer, there is a delay hard-coded after tape loading. You
can either increase that time, or activate the
wait_for_drive()-function. I'd prefer the latter.
Arno
> Regards,
> Daniel
>
>
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> SF.Net email is sponsored by:
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services
> for just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
www.its-lehmann.de
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
