On Dec 12, 2007 8:52 PM, Daniel Bareiro <[EMAIL PROTECTED]> wrote:
> Hi all!
>
> This is my first mail to the list. I'm newbie with Bacula. I'm using
> Bacula version (1.38.11-8) from Debian Etch for Sparc respositories.
>
> The operating system detects the tape library and I can operate it with
> mt and mtx:
>
> sparky:~# cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: SEAGATE Model: ST318404LC Rev: 0002
> Type: Direct-Access ANSI SCSI revision: 03
> Host: scsi0 Channel: 00 Id: 06 Lun: 00
> Vendor: TOSHIBA Model: XM6201TASUN32XCD Rev: 1103
> Type: CD-ROM ANSI SCSI revision: 02
> Host: scsi3 Channel: 00 Id: 01 Lun: 00
> Vendor: HP Model: C6280-7000 Rev: 2.10
> Type: Medium Changer ANSI SCSI revision: 02
> Host: scsi3 Channel: 00 Id: 02 Lun: 00
> Vendor: QUANTUM Model: DLT7000 Rev: 296D
> Type: Sequential-Access ANSI SCSI revision: 02
>
> sparky:~# mtx -f /dev/sg2 status
> Storage Changer /dev/sg2:1 Drives, 8 Slots ( 0 Import/Export )
> Data Transfer Element 0:Empty
> Storage Element 1:Full
> Storage Element 2:Full
> Storage Element 3:Full
> Storage Element 4:Full
> Storage Element 5:Full
> Storage Element 6:Full
> Storage Element 7:Full
> Storage Element 8:Full
>
> sparky:~# mt -f /dev/st0 status
> SCSI 2 tape drive:
> File number=-1, block number=-1, partition=0.
> Tape block size 0 bytes. Density code 0x0 (default).
> Soft error count since last status=0
> General status bits on (50000):
> DR_OPEN IM_REP_EN
>
> But checking the status storage from the Baculas's console delays long
> time without returns some results.
>
> sparky:/etc/bacula# ps ax|grep bacula|grep -v grep
> 24604 ? Ss 0:00 /usr/sbin/bacula-dir -c
> /etc/bacula/bacula-dir.conf -u bacula -g bacula
> 24605 ? S 0:00 /usr/sbin/bacula-dir -c
> /etc/bacula/bacula-dir.conf -u bacula -g bacula
> 24606 ? S 0:00 /usr/sbin/bacula-dir -c
> /etc/bacula/bacula-dir.conf -u bacula -g bacula
> 24607 ? S 0:00 /usr/sbin/bacula-dir -c
> /etc/bacula/bacula-dir.conf -u bacula -g bacula
> 25467 ? Ss 0:00 /usr/sbin/bacula-sd -c
> /etc/bacula/bacula-sd.conf -u bacula -g tape
> 25469 ? S 0:00 /usr/sbin/bacula-sd -c
> /etc/bacula/bacula-sd.conf -u bacula -g tape
> 25470 ? S 0:00 /usr/sbin/bacula-sd -c
> /etc/bacula/bacula-sd.conf -u bacula -g tape
> 25471 ? S 0:00 /usr/sbin/bacula-sd -c
> /etc/bacula/bacula-sd.conf -u bacula -g tape
>
> sparky:/etc/bacula# bconsole
> Connecting to Director sparky.educ.gov.ar:9101
> 1000 OK: maquinadirectora-dir Version: 1.38.11 (28 June 2006)
> Enter a period to cancel a command.
> *status
> Using default Catalog name=MyCatalog DB=bacula
> Status available for:
> 1: Director
> 2: Storage
> 3: Client
> 4: All
> Select daemon type for status (1-4): 2
> The defined Storage resources are:
> 1: respaldadora-sd
> 2: File
> Select Storage resource (1-2): 1
> Connecting to Storage daemon respaldadora-sd at sparky.educ.gov.ar:9103
> [ ... delays long time without returns some results ... ]
>
>
> The permissions over devices are corrects.
>
> sparky:~# ll /dev/st0 /dev/sg2
> crw-rw---- 1 root tape 21, 2 2007-12-12 11:54 /dev/sg2
> crw-rw---- 1 root tape 9, 0 2007-12-12 11:54 /dev/st0
>
> sparky:~# id bacula
> uid=105(bacula) gid=105(bacula) grupos=105(bacula),26(tape)
>
> In the bacula-sd.conf:
>
> Autochanger {
> Name = Autochanger
> Device = Drive-1
> Device = Drive-2
> Device = Drive-3
> Device = Drive-4
> Device = Drive-5
> Device = Drive-6
> Device = Drive-7
> Device = Drive-8
> Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg2
> }
>
> Device {
> Name = Drive-1 #
> Drive Index = 0
> Media Type = DLT-7000
> Archive Device = /dev/nst0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
>
> [...]
>
> Device {
> Name = Drive-8 #
> Drive Index = 0
> Media Type = DLT-7000
> Archive Device = /dev/nst0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
>
> Any idea to resolve this issue?
>
You need to define 1 device and not 8 because you have only 1 tape drive.
John
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
