What I'm calling the "users" password is the password found on the client's bacula-fd.conf.
I'll double check the configs again. Dan Langille wrote: > On December 6, 2007 08:19:47 am Roy Vestal wrote: > >> I checked both of those. I did turn off the firewall. This particular PC >> uses Norton Internet Suite. I also verified the director's pw was in the >> console.conf and bacula-fd.conf on the Windows box and the users >> password from the Windows bacula.conf was in the client section of the >> bacula-dir.conf . >> > > I am not convinced you have the right passwords in the right place. > > The password in bacula-fd.conf should be the same as that found in the > corresponding Client resource [for that client] in bacula-dir.conf. This is > not the Director's password. > > I do not know what you mean by users password, but ensure the above is fixed > first. > > Yes, in bconsole.conf, you want the Director's password. This is because the > console will be contacting the Director. > > ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
