This is quite old, but I found the solution to my problem. I¹m posting here
for archival purposes in case someone else runs into the same problem.
The solution was to put the autochanger name as the device in the Storage
section of the director¹s configuration. I had the actual drive name listed
and as such would only act on the first device which was the first drive.
This was documented in the manual as I was looking for something else.
Robert
On 7/31/07 3:29 PM, "Robert LeBlanc" <[EMAIL PROTECTED]> wrote:
> I upgraded to 2.1.28 to see if I could get this working. I¹ve set up our
> autochanger with two drives, but I can¹t mount a tape in the second drive.
> When asked for the drive I type in 1¹, but it says that it is mounting it in
> drive 0¹. Do I have the format wrong?
>
> *mount
> The defined Storage resources are:
> 1: PV132T
> 2: Neo8000
> 3: File
> Select Storage resource (1-3): 2
> Enter autochanger drive[0]: 1
> Enter autochanger slot: 12
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3302 Autochanger "loaded? drive 0", result: nothing loaded.
> 3304 Issuing autochanger "load slot 12, drive 0" command.
> 3305 Autochanger "load slot 12, drive 0", status is OK.
>
>
> Device status:
> Autochanger "Neo8000" with devices:
> "Drive-1" (/dev/nst0)
> "Drive-2" (/dev/nst1)
> Device "Drive-1" (/dev/nst0) is mounted with:
> Volume: 000012L3
> Pool: *unknown*
> Media type: LTO3
> Slot 12 is loaded in drive 0.
> Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
> Positioned at File=0 Block=0
> Device "Drive-2" (/dev/nst1) is not open.
> Drive 1 status unknown.
> ====
>
>
> Robert LeBlanc
> College of Life Sciences Computer Support
> Brigham Young University
> [EMAIL PROTECTED]
> (801)422-1882
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems? Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
>
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
Robert LeBlanc
College of Life Sciences Computer Support
Brigham Young University
[EMAIL PROTECTED]
(801)422-1882
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
