Hi, I am seeing this problem intermittently on two systems using bacula - both using VXA2 tape drives connected to Adaptec aic7892 SCIS cards.
On the the odd occasion, I will insert a tape and attempt to mount it, but bacula will respond with [1] (below). Only by stopping the storage daemon, ejecting the tape, re-inserting the same tape, and starting the storage daemon, can I mount the tape. IO errors are no longer found in this instance. Any suggestion on what the problem may be here? Thanks, Bradley [1] -------------------------------------------------------------------------------------------------------- block.c:987 Read error on fd=5 at file:blk 0:0 on device "VXA-2" (/dev/nst0). ERR=Input/output error. 3902 Cannot mount Volume on Storage Device "VXA-2" (/dev/nst0) because: Requested Volume "" on "VXA-2" (/dev/nst0) is not a Bacula labeled Volume, because: ERR=block.c:987 Read error on fd=5 at file:blk 0:0 on device "VXA-2 " (/dev/nst0). ERR=Input/output error. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
