Hey,
have the Bacula Version: 2.0.3 on my Debian
my Backup is running, i think complete:
2007-08-04 12:39:13 backup-dir: Start Backup JobId 317,
Job=backup_bmsserver6.2007-08-04_12.39.11
�2007-08-04 12:37:19 bmsserver6-fd: ClientBeforeJob: run command
"/usr/local/bin/mysql_dump/mysql_dump_stop"
�2007-08-04 12:41:44 backup-sd: 3307 Issuing autochanger "unload slot
4, drive 0" command.
�2007-08-04 12:42:58 backup-sd: 3304 Issuing autochanger "load slot 6,
drive 0" command.
�2007-08-04 12:44:32 backup-sd: 3305 Autochanger "load slot 6, drive
0", status is OK.
�2007-08-04 12:44:32 backup-sd: 3301 Issuing autochanger "loaded?
drive 0" command.
�2007-08-04 12:44:34 backup-sd: 3302 Autochanger "loaded? drive 0",
result is Slot 6.
�2007-08-04 12:44:43 backup-sd: Recycled volume "000111L2" on device
"Quantum_LTO2HH" (/dev/nst0), all previous data lost.
�2007-08-04 12:44:43 backup-sd: Spooling data ...
�1970-01-01 01:00:01 bmsserver6-fd: /lib/init/rw is a different
filesystem. Will not descend from / into /lib/init/rw
�1970-01-01 01:00:01 bmsserver6-fd: /dev is a different
filesystem. Will not descend from / into /dev
�1970-01-01 01:00:01 bmsserver6-fd: /proc is a different
filesystem. Will not descend from / into /proc
�1970-01-01 01:00:01 bmsserver6-fd: /sys is a different
filesystem. Will not descend from / into /sys
�2007-08-04 12:59:25 backup-sd: Job write elapsed time = 00:14:42,
Transfer rate = 6.223 M bytes/second
�2007-08-04 12:59:25 backup-sd: Committing spooled data to Volume
"000111L2". Despooling 5,497,794,247 bytes ...
�2007-08-04 12:57:30 bmsserver6-fd: ClientAfterJob: run command
"/usr/local/bin/mysql_dump/mysql_dump_start"
�2007-08-04 13:07:54 backup-sd: Despooling elapsed time = 00:08:29,
Transfer rate = 10.80 M bytes/second
�2007-08-04 13:08:02 backup-sd: Sending spooled attrs to the Director.
Despooling 23,761,021 bytes ...
�
BUT the job is never ending... :
list jobs said:
| 317 | backup_bmsserver6 | 2007-08-04 12:41:43 | B | F |
0 | 0 | R |
but this problem i have only if i use RunScript AFTER.. if i use only
before and without after then i have no problems.
my config:
RunScript {
RunsOnClient = yes
RunsWhen = After
RunsOnFailure = yes
AbortJobOnError = No
Command = "/usr/local/bin/mysql_dump/mysql_dump_start"
}
please, any ideas? thank you,
thomas :-)
Liebe Gruesse
Thomas
--------------------------------------------------------------
Kirchenstr. 95 | 81675 Muenchen
Telefon: +49 (0) 89 41 07 48 49
Fax: +49 (0) 178 99 63 23 765
Mobile: +49 (0) 178 63 23 765
--------------------------------------------------------------
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
