I upgraded to 2.1.28 to see if I could get this working. I've set up our
autochanger with two drives, but I can't mount a tape in the second
drive. When asked for the drive I type in '1', but it says that it is
mounting it in drive '0'. Do I have the format wrong?
*mount
The defined Storage resources are:
1: PV132T
2: Neo8000
3: File
Select Storage resource (1-3): 2
Enter autochanger drive[0]: 1
Enter autochanger slot: 12
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3304 Issuing autochanger "load slot 12, drive 0" command.
3305 Autochanger "load slot 12, drive 0", status is OK.
...
Device status:
Autochanger "Neo8000" with devices:
"Drive-1" (/dev/nst0)
"Drive-2" (/dev/nst1)
Device "Drive-1" (/dev/nst0) is mounted with:
Volume: 000012L3
Pool: *unknown*
Media type: LTO3
Slot 12 is loaded in drive 0.
Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
Positioned at File=0 Block=0
Device "Drive-2" (/dev/nst1) is not open.
Drive 1 status unknown.
====
Robert LeBlanc
College of Life Sciences Computer Support
Brigham Young University
[EMAIL PROTECTED]
(801)422-1882
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
