Broderick Wood wrote:
> I would also do a quick check to make sure you have LUN support enabled.
> 
> 

What is LUN support, and how do I check to make sure it is enabled?

~maria

> 
> On Wed, 13 Jun 2007 14:24:09 -0700
> Michael Nelson <[EMAIL PROTECTED]> wrote:
> 
>> Are you sure that /dev/sg0 is in fact the autochanger device and not the 
>> tape drive?
>>
>> For instance on my server (from dmesg output):
>>
>>
>> (scsi3:A:4): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
>>   Vendor: CERTANCE  Model: ULTRIUM 3         Rev: 1856
>>   Type:   Sequential-Access                  ANSI SCSI revision: 04
>> Attached scsi generic sg2 at scsi3, channel 0, id 4, lun 0,  type 1
>>
>> st: Version 20040403, fixed bufsize 32768, s/g segs 256
>> Attached scsi tape st0 at scsi3, channel 0, id 4, lun 0
>> st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 
>> 134217727
>>   Vendor: QUANTUM   Model: UHDL              Rev: 0031
>>   Type:   Medium Changer                     ANSI SCSI revision: 02
>> Attached scsi generic sg3 at scsi3, channel 0, id 4, lun 1,  type 8
>>
>> So the generic device for my tape drive is /dev/sg2 (but the tape drive 
>> is normally addressed as /dev/nst0) and the changer for it is /dev/sg3.
>>
>> It would be interesting to see the output of "cat /proc/scsi/scsi" on 
>> your machine.
>>
>> [EMAIL PROTECTED] ~]# cat /proc/scsi/scsi
>> Attached devices:
>> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>>   Vendor: LSILOGIC Model: 1030 IM          Rev: 1000
>>   Type:   Direct-Access                    ANSI SCSI revision: 02
>> Host: scsi0 Channel: 00 Id: 08 Lun: 00
>>   Vendor: IBM      Model: 25P3495a S320  1 Rev: 1
>>   Type:   Processor                        ANSI SCSI revision: 02
>> Host: scsi3 Channel: 00 Id: 04 Lun: 00
>>   Vendor: CERTANCE Model: ULTRIUM 3        Rev: 1856
>>   Type:   Sequential-Access                ANSI SCSI revision: 04
>> Host: scsi3 Channel: 00 Id: 04 Lun: 01
>>   Vendor: QUANTUM  Model: UHDL             Rev: 0031
>>   Type:   Medium Changer                   ANSI SCSI revision: 02
>>
>>
>>
>>
>> -- 
>> This message has been scanned for viruses and
>> dangerous content by MailScanner, and is
>> believed to be clean.
>>
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> Bacula-users mailing list
>> Bacula-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
> 
> 

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to