Hi,
Not really... I made some changes on my configuration which should fix
the problem but it doesn't :
### SD conf
Autochanger {
Name = Dell-PV132T
Device = ULTRIUM-TD3-1
Device = ULTRIUM-TD3-2
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg2
}
Autochanger {
Name = Dell-PV132T-1drive
Device = ULTRIUM-TD3-1
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg2
}
Device {
Name = ULTRIUM-TD3-1
Drive Index = 0
Media Type = LTO3
Archive Device = /dev/nst0
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
Offline On Unmount = no;
AutoChanger = yes
}
Device {
Name = ULTRIUM-TD3-2
Drive Index = 1
Media Type = LTO3
Archive Device = /dev/nst1
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
Offline On Unmount = no;
AutoChanger = yes
}
### Dir conf
Storage {
Name = Autochanger
Address = srv-mpp-lrs
SDPort = 9103
Password = "xxx"
Device = Dell-PV132T
Media Type = LTO3
Autochanger = yes
Maximum Concurrent Jobs = 2
}
Storage {
Name = Autochanger-1drive
Address = srv-mpp-lrs
SDPort = 9103
Password = "xxx"
Device = Dell-PV132T-1drive
Media Type = LTO3
Autochanger = yes
Maximum Concurrent Jobs = 1
}
As you can see I've written to autochanger ressources, but one has only
one drives. The same problems still occurs but now we can't tell bacula
haven't looked a inchanger flag because the device wasn't an autochanger...
Any other pointers ?
May I run two different SD ? (maybe without having "always open = on")
Arno Lehmann a écrit :
> Hi,
>
> well, I think this problem is understood now :-)
>
> On 5/23/2007 9:00 AM, Adam Cécile wrote:
>
>> Hi,
>>
>> Here is what happens :
>> Blogs are scheduled on the first appendable volume, without looking at
>> the inchanger flag. If I mark this volume as Used or Full, jobs gets
>> scheduled on the next appendable volume, instead of the next one
>> appendable and inchanger.
>>
>> #### Scheduled jobs
>> Scheduled Jobs:
>> Level Type Pri Scheduled Name Volume
>> ===================================================================================
>> Full Backup 5 23-mai-07 12:00 Backup-srv-mpp-archi-dwh
>> 000121
>> Full Backup 5 23-mai-07 12:00
>> Backup-srv-mpp-archi-treso 000121
>> Full Backup 5 23-mai-07 12:00
>> Backup-srv-mpp-archi-totem 000121
>> Full Backup 5 23-mai-07 12:00
>> Backup-srv-mpp-archi-filemaker 000121
>> Full Backup 5 23-mai-07 12:00
>> Backup-srv-mpp-archi-equilibre 000121
>> Full Backup 5 23-mai-07 20:00
>> Backup-srv-mpp-exchang-daily 000121
>>
>>
>> ### List volumes (on this Pool)
>> Pool: Daily
>> +---------+------------+-----------+---------+-------------------+----------+--------------+---------+------+-----------+-----------+---------------------+
>> | MediaId | VolumeName | VolStatus | Enabled | VolBytes |
>> VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType |
>> LastWritten |
>> +---------+------------+-----------+---------+-------------------+----------+--------------+---------+------+-----------+-----------+---------------------+
>> | 59 | 000143 | Purged | 1 | 394,391,772,372 |
>> 422 | 1,209,600 | 1 | 1 | 1 | LTO3 | 2007-04-05
>> 08:44:03 |
>> | 60 | 000115 | Purged | 1 | 152,609,505,455 |
>> 163 | 1,209,600 | 1 | 8 | 0 | LTO3 | 2007-04-19
>> 13:29:21 |
>> | 61 | 000116 | Purged | 1 | 1,278,772,008,661 |
>> 1,409 | 1,209,600 | 1 | 9 | 0 | LTO3 |
>> 2007-04-23 13:30:52 |
>> | 62 | 000117 | Purged | 1 | 742,127,695,846 |
>> 789 | 1,209,600 | 1 | 10 | 0 | LTO3 | 2007-04-26
>> 21:10:42 |
>> | 63 | 000118 | Full | 1 | 824,915,470,096 |
>> 894 | 1,209,600 | 1 | 11 | 0 | LTO3 | 2007-05-09
>> 15:38:16 |
>> | 64 | 000119 | Purged | 1 | 25,754,213,310 |
>> 31 | 1,209,600 | 1 | 12 | 0 | LTO3 | 2007-04-27
>> 08:48:46 |
>> | 65 | 000120 | Full | 1 | 553,103,626,001 |
>> 577 | 1,209,600 | 1 | 13 | 0 | LTO3 | 2007-05-11
>> 13:59:48 |
>> | 66 | 000121 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 14 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 91 | 000103 | Purged | 1 | 227,552,907,045 |
>> 250 | 1,209,600 | 1 | 10 | 0 | LTO3 | 2007-05-04
>> 13:58:14 |
>> | 92 | 000104 | Purged | 1 | 1
>> | 0 | 1,209,600 | 1 | 11 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 93 | 000105 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 12 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 94 | 000106 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 13 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 95 | 000107 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 14 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 96 | 000101 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 8 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 97 | 000102 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 9 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 98 | 000129 | Used | 1 | 407,865,033,101 |
>> 427 | 1,209,600 | 1 | 8 | 0 | LTO3 | 2007-05-16
>> 13:26:57 |
>> | 99 | 000130 | Used | 1 | 210,849,249,755 |
>> 233 | 1,209,600 | 1 | 9 | 0 | LTO3 | 2007-05-17
>> 13:22:21 |
>> | 100 | 000131 | Used | 1 | 202,314,381,696 |
>> 224 | 1,209,600 | 1 | 10 | 0 | LTO3 | 2007-05-18
>> 13:59:23 |
>> | 101 | 000132 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 11 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 102 | 000133 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 12 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 103 | 000134 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 13 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 104 | 000135 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 14 | 0 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 105 | 000144 | Purged | 1 | 193,536
>> | 1 | 1,209,600 | 1 | 2 | 1 | LTO3 |
>> 2007-05-21 12:00:25 |
>> | 106 | 000145 | Used | 1 | 216,361,248,768 |
>> 253 | 1,209,600 | 1 | 3 | 1 | LTO3 | 2007-05-21
>> 23:30:23 |
>> | 107 | 000147 | Used | 1 | 219,473,114,112 |
>> 257 | 1,209,600 | 1 | 4 | 1 | LTO3 | 2007-05-23
>> 00:40:37 |
>> | 108 | 000146 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 5 | 1 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 109 | 000148 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 6 | 1 | LTO3 |
>> 0000-00-00 00:00:00 |
>> | 110 | 000149 | Append | 1 | 1
>> | 0 | 1,209,600 | 1 | 7 | 1 | LTO3 |
>> 0000-00-00 00:00:00 |
>> +---------+------------+-----------+---------+-------------------+----------+--------------+---------+------+-----------+-----------+---------------------+
>>
>> Which volumes are in the autochanger, which ones can be used:
>> See above.
>>
>
> A little difficult to read with the line breaks :-)
>
> The query to "show what Bacula thinks is in changer" or whatever it's
> called in the distribution might be more readable.
>
>
>> What's the state of the SD:
>> Device status:
>> Autochanger "Dell-PV132T" with devices:
>> "ULTRIUM-TD3-1" (/dev/nst0)
>> "ULTRIUM-TD3-2" (/dev/nst1)
>> Device "ULTRIUM-TD3-1" (/dev/nst0) is mounted with Volume="000147"
>> Pool="Daily"
>> Slot 4 is loaded in drive 0.
>> Total Bytes=219,473,114,112 Blocks=3,402,050 Bytes/block=64,512
>> Positioned at File=257 Block=0
>> Device "ULTRIUM-TD3-2" (/dev/nst1) is not open.
>> Drive 1 status unknown.
>> ====
>> In Use Volume status:
>> 000147 on device "ULTRIUM-TD3-1" (/dev/nst0)
>>
>>
>> What happens when jobs start:
>> Nothing; bacula ask me to mount the volume it scheduled the jobs on
>>
>>
>> Could you tell me more about which informations could I give you while
>> running in debug mode ?
>>
>
> The SD configuration and DIR storage devices would have helped here; I
> don't know if you already posted it, but if you did, I overlooked the
> relevant parts :-)
>
>
>> Thanks a lot for your help.
>>
>
> I hope it did help you, but I'm quite sure you've got the problem now.
> Now to fix it :-)
>
> Actually, I think what you need is not easily possible with Bacula. See
> my previous post...
>
> Arno
>
>
>> Arno Lehmann a écrit :
>>
>>> Hi,
>>>
>>> On 5/22/2007 8:59 AM, Adam Cécile wrote: sddddddqqsr
>>>
>>>
>>>> Hello,
>>>>
>>>> I just upgraded to 2.0.3 and I still have the problem. When no candidate
>>>> volume is mounted bacula do weird things.
>>>> Jobs are sheduled on a volume which is not in the library. If I mount a
>>>> good volume into the drive, jobs gets scheduled on it.
>>>> Any pointers ?
>>>>
>>>>
>>> More details... your problem description is becoming less and less
>>> useful for me.
>>>
>>> Which volumes are in the autochanger, which ones can be used, what's the
>>> state of the SD, what happens when jobs start, etc. Also, consider
>>> running the DIR and the SD with debug output, so you can track what the
>>> daemons do internally, i.e. how they decide which volumes to use.
>>>
>>> Arno
>>>
>>>
>>>
>>>> Arno Lehmann a écrit :
>>>>
>>>>
>>>>> Hi,
>>>>>
>>>>> On 5/21/2007 10:33 AM, Adam Cécile wrote:
>>>>>
>>>>>
>>>>>
>>>>>> Andreas Helmcke a écrit :
>>>>>>
>>>>>>
>>>>>>
>>>>>>> On 21.05.2007 08:55, Adam Cécile wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Arno Lehmann a écrit :
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> On 5/18/2007 9:02 AM, Adam Cécile wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> Today my director was blocked.
>>>>>>>>>> It was asking for a volume which had inchangler flag set to no while
>>>>>>>>>> there was 4 purged volume in the right pool.
>>>>>>>>>> I had to load the volume into the drive manually (with mtx) and then
>>>>>>>>>> mount it, otherwise bacula keeps asking for the missing volume.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> Usually, Bacula shoould use whatever tape is available. Obviously,
>>>>>>>>> the
>>>>>>>>> catalog has to represent the actual autochanger inventory.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> How could this happend ? Do I missed something in my configuration ?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> I don't think this is a configuration issue... most of the time, I
>>>>>>>>> see
>>>>>>>>> these problems when tapes were changed and no 'update slots' command
>>>>>>>>> was
>>>>>>>>> executed.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> Update slots has been run, and list media only reports the good volumes
>>>>>>>> as "inchanger".
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>> This is a multi-drive autochanger.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>>>> There is a query in Bacula to show the volumes that Bacula thinks are
>>>>>>>>> in
>>>>>>>>> the changer. Try this, and if it doesn't reflect the current
>>>>>>>>> inventory,
>>>>>>>>> do an 'update slots'. That should work.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> Do you mean list media could be right while the sql catalog may be
>>>>>>>> wrong ?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> If it doesn't, this should be a bug. You'll need to make sure you've
>>>>>>>>> got
>>>>>>>>> a recent version of Bacula running, the catalog is up to date,
>>>>>>>>> capture
>>>>>>>>> debug output for the DIR, and file a bug report. But I don't think
>>>>>>>>> this
>>>>>>>>> will be necessary :-)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> It really looks like being a bug... See my previous mail for more
>>>>>>>> informations.
>>>>>>>> Please notice that if I load the right tape with mtx and then mount it
>>>>>>>> in bacula, the job gets written on this volumes.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> I am not sure but maybe your problems are related to the problems I have
>>>>>>> while using a multidrive autochanger (see me recent mails to this list).
>>>>>>>
>>>>>>> My impression is, that volume selection part of bacula sometimes gets
>>>>>>> confused and is choosing the wrong volume (or at least one which I
>>>>>>> consider wrong ;-) ).
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> ...
>>>>>
>>>>>
>>>>>
>>>>>> This looks like a serious issue. Which version are you running ? I'm on
>>>>>> 1.38.
>>>>>>
>>>>>>
>>>>>>
>>>>> You really should update to 2.0, or, if you dare running a beta version,
>>>>> even 2.1.10.
>>>>>
>>>>> In the newer versions, the device and volume selection and reservation
>>>>> was significantly improved.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>
>
--
Adam CECILE Linbox / Free&ALter Soft
152 rue de Grigy tél: +33 3 87 50 87 95
Technopôle Metz 2000 fax: +33 3 87 75 19 26
57070 METZ - France http://www.linbox.com
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
