On Wed, 2007-05-23 at 15:11 +0200, Lucio wrote: > Arno Lehmann wrote: > > > Running Jobs: > > > JobId Level Name Status > > > ====================================================================== > > > 18 Increme Client1.2007-05-21_12.21.30 is waiting for a mount > > > request > > > > > > (still waiting about 20 minutes after run), and: > > > > Ok. > > > > Have you tried issuing a mount at this time? > Now I have. If the media is blank the mount obviously fails and nothing > happens. > If the media already has at least one session and its appendable the mount > succeeds but in bacula still nothing happens. > > > Also, use trace=1, so you have a bconsle command of 'setdebug level=200 > > trace=1 sd=server-Emmeti-sd' > > > > Then, look at the trace file in the working directory of the SD... IIRC, > > it would be called server-Emmeti-sd.trace. > > I post here the parts that I believe can be useful to find the problem > (blank DVD media in this case): > > server-Emmeti-sd: askdir.c:204 do_reqest_vol_info return true slot=0 > Volume=Backup-0003 > server-Emmeti-sd: reserve.c:159 New Vol=Backup-0003 dev="DVD-Writer" > (/dev/hdb) > server-Emmeti-sd: reserve.c:735 JobId=27 looking for Volume=Backup-0003 > server-Emmeti-sd: reserve.c:862 reserve_append device is disk > server-Emmeti-sd: reserve.c:893 PrefMnt=1 exact=1 suitable=1 chgronly=0 any=0 > server-Emmeti-sd: reserve.c:944 failed: Not exact match have= want=Backup-0003 > server-Emmeti-sd: reserve.c:866 can_reserve_drive!=1 > server-Emmeti-sd: reserve.c:258 free_unused_volume Backup-0003 > server-Emmeti-sd: reserve.c:760 Not OK. > server-Emmeti-sd: reserve.c:597 Suitable device found=DVD-Writer, not used: > busy > The last line does not look good. It says "not used: busy". Are you sure that you do not have any automount or other automatic mounter running.
> [...] > > server-Emmeti-sd: dircmd.c:206 <dird: run > server-Emmeti-sd: dircmd.c:220 Do command: run > server-Emmeti-sd: job.c:153 Run_cmd: run > server-Emmeti-sd: job.c:172 Client1.2007-05-23_14.01.20 waiting 1800 sec for > FD to contact SD > server-Emmeti-sd: bnet.c:1154 who=client host=127.0.0.1 port=36643 > server-Emmeti-sd: dircmd.c:169 Conn: Hello Start Job > Client1.2007-05-23_14.01.20 > server-Emmeti-sd: job.c:214 Found Job Client1.2007-05-23_14.01.20 > > [...] > > server-Emmeti-sd: job.c:190 Running job Client1.2007-05-23_14.01.20 > server-Emmeti-sd: fd_cmds.c:122 Start run Job=Client1.2007-05-23_14.01.20 > server-Emmeti-sd: fd_cmds.c:160 <filed: append open session > server-Emmeti-sd: fd_cmds.c:228 Append open session: append open session > server-Emmeti-sd: fd_cmds.c:238 >filed: 3000 OK open ticket = 1 > server-Emmeti-sd: fd_cmds.c:160 <filed: append data 1 > server-Emmeti-sd: fd_cmds.c:190 Append data: append data 1 > server-Emmeti-sd: fd_cmds.c:192 <bfiled: append data 1 > server-Emmeti-sd: append.c:73 Start append data. res=1 > server-Emmeti-sd: acquire.c:318 acquire_append device is DVD > server-Emmeti-sd: acquire.c:384 Not in append mode, try mount. > server-Emmeti-sd: acquire.c:390 Do mount_next_write_vol > server-Emmeti-sd: mount.c:74 Enter mount_next_volume(release=0) > dev="DVD-Writer" (/dev/hdb) > server-Emmeti-sd: mount.c:84 mount_next_vol retry=0 > server-Emmeti-sd: mount.c:110 Before dir_find_next_appendable_volume. > server-Emmeti-sd: askdir.c:252 dir_find_next_appendable_volume > server-Emmeti-sd: askdir.c:266 >dird: CatReq Job=Client1.2007-05-23_14.01.20 > FindMedia=1 pool_name=Default media_type=DVD > server-Emmeti-sd: askdir.c:182 <dird 1000 OK VolName=Backup-0003 VolJobs=0 > VolFiles=0 VolBlocks=0 VolBytes=0 VolMounts=0 VolErrors=0 VolWrites=0 > MaxVolBytes=4608000000 VolCapacityBytes=0 VolStatus=Append Slot=0 > MaxVolJobs=0 MaxVolFiles=0 InChanger=0 VolReadTime=0 VolWriteTime=0 EndFile=0 > EndBlock=0 VolParts=0 LabelType=0 MediaId=3 > server-Emmeti-sd: askdir.c:204 do_reqest_vol_info return true slot=0 > Volume=Backup-0003 > server-Emmeti-sd: reserve.c:323 Vol=Backup-0003 not in use. > server-Emmeti-sd: reserve.c:159 New Vol=Backup-0003 dev="DVD-Writer" > (/dev/hdb) > server-Emmeti-sd: mount.c:122 After find_next_append. Vol=Backup-0003 Slot=0 > Parts=0 > server-Emmeti-sd: autochanger.c:121 Device "DVD-Writer" (/dev/hdb) is not an > autochanger > server-Emmeti-sd: mount.c:142 autoload_dev returns 0 > server-Emmeti-sd: mount.c:158 Ask=0 autochanger=0 > server-Emmeti-sd: mount.c:168 want vol=Backup-0003 > server-Emmeti-sd: dev.c:295 open dev: type=3 dev_name="DVD-Writer" (/dev/hdb) > vol=Backup-0003 mode=OPEN_READ_WRITE > server-Emmeti-sd: dev.c:302 call open_dvd_device mode=OPEN_READ_WRITE > server-Emmeti-sd: dev.c:510 Enter: open_dvd_dev: DVD vol= mode=OPEN_READ_WRITE > server-Emmeti-sd: dev.c:521 Volume=Backup-0003 > server-Emmeti-sd: dev.c:533 Set part=1 > server-Emmeti-sd: dev.c:546 open DVD part=1 num_dvd_parts=0 > server-Emmeti-sd: dev.c:563 open_dvd_device: part=1 num_dvd_parts=0, > VolCatInfo.VolCatParts=0 > server-Emmeti-sd: dev.c:1957 Enter mount > server-Emmeti-sd: dev.c:2005 do_mount: cmd=/bin/mount /dev/hdb mounted=0 > server-Emmeti-sd: dev.c:2017 do_mount run_prog=/bin/mount /dev/hdb > server-Emmeti-sd: dev.c:1996 ======= mount=0 > server-Emmeti-sd: dev.c:2040 Device "DVD-Writer" (/dev/hdb) cannot be > mounted. stat=268435488 result=mount: wrong fs type, bad option, bad > superblock on /dev/hdb, > missing codepage or other error > In some cases useful info is found in syslog - try > dmesg | tail or so > > ERR=Child exited with code 32 > server-Emmeti-sd: dev.c:2084 do_mount: ignoring . in /media/cdrom0 > server-Emmeti-sd: dev.c:2084 do_mount: ignoring .. in /media/cdrom0 > server-Emmeti-sd: dev.c:2077 do_mount: failed to find suitable file in dir > /media/cdrom0 (dev="DVD-Writer" (/dev/hdb)) > server-Emmeti-sd: dev.c:2090 do_mount: got 0 files in the mount point (not > counting ., .. and .keep) > server-Emmeti-sd: dev.c:2110 ============ mount=0 > server-Emmeti-sd: dev.c:612 DVD device mount failed. > [...] > > Then it retries mounting a few times and finally: > > server-Emmeti-sd: mount.c:158 Ask=1 autochanger=0 > server-Emmeti-sd: dev.c:1972 Enter unmount > server-Emmeti-sd: wait.c:65 Enter blocked=BST_DOING_ACQUIRE > > But... er... I find it's quite obvious that mount fails... it's a blank media > after all! Shouldn't SD > "format" (label) the media before trying to mount it? > Only if you have set automatic label up. From memory your -sd Device config needs "LabelMedia = Yes" I do not remember if you need to set anything in the -dir.conf. At a minimum you probably need a LabelFormat=xxx in the Pool definition Does the label command work against blank media? Richard -- Richard Mortimer <[EMAIL PROTECTED]> ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
