Richard wrote: > > server-Emmeti-sd: reserve.c:760 Not OK. > > server-Emmeti-sd: reserve.c:597 Suitable device found=DVD-Writer, not > > used: busy > > The last line does not look good. It says "not used: busy". Are you sure > that you do not have any automount or other automatic mounter running. I'm not sure and I can't check just now, but it's a blank media anyway, so even if I had hundreds of automounters none of them could mount anything.
> > Shouldn't SD "format" (label) the media before trying to > > mount it? > > Only if you have set automatic label up. From memory your -sd Device > config needs "LabelMedia = Yes" I do not remember if you need to set > anything in the -dir.conf. At a minimum you probably need a > LabelFormat=xxx in the Pool definition I have both variables set. > Does the label command work against blank media? Do you mean the label command available in bconsole? I've not tried that because it's being described as "label a tape", so I've assumed it's of no use for DVDs... I'll try asap. Lucio. -- Virtual Bit di Lucio Crusca via Isonzo, 5 10069 - Villar Perosa (TO) http://virtualbit.sulweb.org ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
