Hi,

On 5/10/2007 12:01 PM, Andy Collyer wrote:
> 
> Hi there.
>  
> I'm trying to get a Quantum DLT-V4 device working.  I wonder if someone 
> would mind holding my hand through some of the basics???
>  
> 1. How do I know which device (i.e. /dev/???) to use? 
>  
> /proc/scsi/scsi says:
> Attached devices:
> Host: scsi0 Channel: 01 Id: 00 Lun: 00
>   Vendor: MegaRAID Model: LD 0 RAID1   78G Rev: 713R
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> Host: scsi0 Channel: 01 Id: 01 Lun: 00
>   Vendor: MegaRAID Model: LD 1 RAID5  476G Rev: 713R
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> Host: scsi3 Channel: 00 Id: 00 Lun: 00
>   Vendor: QUANTUM  Model: DLT-V4           Rev: 0800
>   Type:   Sequential-Access                ANSI SCSI revision: 02
>

This one is your tape drive, it's the first tape drive listed, so it 
should be /dev/nst0 as an archive device.

Test with tar, dd, mt - whatever, and if these access the tape drive, 
use that device.

>  
> I've tried the more obvious ones, like /dev/nst0 and /dev/sg3 and I 
> could be here forever trying every single one!  My first test is to 
> eject the device through bacula - so far they all eject the DVD writer.  
> Is that a sensible test?

It might be more helpful to follow the procedure given in the manual.


>  What *is* a definitive test?  I'd like to get 
> as close as possible to ensuring the device settings are correct before 
> validating my bacula configuration...

Just use btape to test the tape drive from Baculas point of view.

You need a correct SD config for that.

Arno


> All help gratefully received!
> Andy C
>  
> 
> -------------------------------------------------------------
> 
> This email and any files transmitted with it are confidential and are 
> intended solely for the use of the individual(s) or entity to whom they 
> are addressed.  If you are not the intended recipient you must not read, 
> use or disseminate the information contained in the email and its 
> attachments.
> 
> Any views expressed in the email or its attachments are those of the 
> author and may not necessarily constitute or imply its endorsement by 
> Bow Software Ltd.
> 
> -------------------------------------------------------------
> 
> Bow Software Ltd
> The Old Malt House
> Bow
> Crediton
> Devon  EX17 6HB
> http://www.bowsoftware.co.uk
> 
> Registered in England No. 5934136
> 
> -------------------------------------------------------------
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users

-- 
IT-Service Lehmann                    [EMAIL PROTECTED]
Arno Lehmann                  http://www.its-lehmann.de

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to