run this
mt -f Tape0 setblk 0
then run btape again.
[EMAIL PROTECTED] wrote:
> I've commented the min and max lines.. ran the btape command but I
> think there is a problem :
>
> C:\Program Files\Bacula\bin>btape -c "C:\Documents and Settings\All
> Users\Applic
> ation Data\Bacula\bacula-sd.conf" Tape0
> Tape block granularity is 1024 bytes.
> btape: ../../stored/butil.c:286 Using device: "Tape0" for writing.
> 26-Mar 15:33 btape: 3301 Issuing autochanger "loaded? drive 0" command.
> 26-Mar 15:33 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1.
> 26-Mar 15:33 btape: 3301 Issuing autochanger "loaded? drive 0" command.
> 26-Mar 15:33 btape: 3302 Autochanger "loaded? drive 0", result is Slot 1.
> btape: ../../stored/btape.c:368 open device "HPStorageTape0" (Tape0): OK
> *test
>
> === Write, rewind, and re-read test ===
>
> I'm going to write 1000 records and an EOF
> then write 1000 records and an EOF, then rewind,
> and re-read the data to verify that it is correct.
>
> This is an *essential* feature ...
>
> 26-Mar 15:33 btape: btape Error: ../../stored/block.c:569 Write error
> at 0:0 on
> device "HPStorageTape0" (Tape0). ERR=Input/output error.
> 26-Mar 15:33 btape: btape Error: Backspace record at EOT failed.
> ERR=Input/outpu
> t error
> btape: ../../stored/btape.c:821 Error writing block to device.
> *
>
>
> ----- Message d'origine ----
> De : Brian Debelius <[EMAIL PROTECTED]>
> À : [EMAIL PROTECTED]
> Cc : bacula-users@lists.sourceforge.net
> Envoyé le : Lundi, 26 Mars 2007, 15h23mn 38s
> Objet : Re: Re : [Bacula-users] Re : Windows::Permission denied
>
> Nawfel, you are getting ahead of yourself. Try taking out the min and
> max like kern suggested.
>
> after you make the changes, load a tape into Tape0
> goto your bacula program directory and run
> btape -c "c:\program files\all users\application
> data\bacula\bacula-sd.conf" Tape0
> enter 'test' at the prompt
>
>
> [EMAIL PROTECTED] wrote:
> > with or without the Min/Max block size params I get the following
> > message :
> >
> > ilemma009-sd Version: 2.0.3 (06 March 2007) Linux Cross-compile Win32
> > Daemon started 26-Mar-07 15:08, 1 Job run since started.
> > Heap: bytes=18,066 max_bytes=114,757 bufs=80 max_bufs=93
> >
> > Running Jobs:
> > No Jobs running.
> > ====
> >
> > Jobs waiting to reserve a drive:
> > ====
> >
> > Terminated Jobs:
> > JobId Level Files Bytes Status Finished Name
> > ===================================================================
> > 22 Full 0 0 Error 26-Mar-07 15:04 Client1
> > 24 Full 0 0 Error 26-Mar-07 15:10 Client1
> > ====
> >
> > Device status:
> > Autochanger "HPStorageAutochanger" with devices:
> > "HPStorageTape0" (Tape0)
> > "HPStorageTape1" (Tape1)
> > Device "HPStorageTape0" (Tape0) is not open.
> > Slot 1 is loaded in drive 0.
> > Device "HPStorageTape1" (Tape1) is not open.
> > Drive 1 status unknown.
> > ====
> >
> > In Use Volume status:
> > ====
> >
> >
> > when I type "messages " in the bconsole I get the following : (sorry
> > for the lenth ! and thank you for your interest)
> >
> > 23-Mar 03:03 ilemma009-sd: Job Client1.2007-03-23_02.03.00 waiting.
> > Cannot find
> > any appendable volumes.
> > Please use the "label" command to create a new Volume for:
> > Storage: "HPStorageTape0" (Tape0)
> > Media type: damnedHPUltriumTape
> > Pool: Default
> > 23-Mar 03:03 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
> > ../../lib/message
> > .c:713 Operator mail program terminated in error.
> > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> > Administrato
> > r" -s "Bacula: Intervention needed for Client1.2007-03-23_02.03.00"
> > Administrato
> > r
> > ERR=Unknown error
> > 23-Mar 05:03 ilemma009-sd: Job Client1.2007-03-23_02.03.00 waiting.
> > Cannot find
> > any appendable volumes.
> > Please use the "label" command to create a new Volume for:
> > Storage: "HPStorageTape0" (Tape0)
> > Media type: damnedHPUltriumTape
> > Pool: Default
> > 23-Mar 05:03 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
> > ../../lib/message
> > .c:713 Operator mail program terminated in error.
> > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> > Administrato
> > r" -s "Bacula: Intervention needed for Client1.2007-03-23_02.03.00"
> > Administrato
> > r
> > ERR=Unknown error
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> > Network err
> > or with FD during Backup: ERR=Broken pipe
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> > No Job stat
> > us returned from FD.
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
> > ../../cats/sql_up
> > date.c:194 ../../cats/sql_update.c:194 update UPDATE Job SET
> > JobStatus='f',EndTi
> > me='2007-03-23
> > 18:32:37',ClientId=1,JobBytes=0,JobFiles=0,JobErrors=3,VolSession
> >
> Id=1,VolSessionTime=1174650862,PoolId=1,FileSetId=1,JobTDate=1174674757,RealEndT
> > ime='2007-03-23 18:32:37',PriorJobId=0 WHERE JobId=20 failed:
> > Can't connect to MySQL server on 'localhost' (10061)
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Warning: Error
> > updating
> > job record. ../../cats/sql_update.c:194 update UPDATE Job SET
> > JobStatus='f',EndT
> > ime='2007-03-23
> > 18:32:37',ClientId=1,JobBytes=0,JobFiles=0,JobErrors=3,VolSessio
> >
> nId=1,VolSessionTime=1174650862,PoolId=1,FileSetId=1,JobTDate=1174674757,RealEnd
> > Time='2007-03-23 18:32:37',PriorJobId=0 WHERE JobId=20 failed:
> > Can't connect to MySQL server on 'localhost' (10061)
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> > ../../cats/
> > sql_get.c:288 ../../cats/sql_get.c:288 query SELECT
> > VolSessionId,VolSessionTime,
> >
> PoolId,StartTime,EndTime,JobFiles,JobBytes,JobTDate,Job,JobStatus,Type,Level,Cli
> > entId,Name,PriorJobId,RealEndTime,JobId FROM Job WHERE JobId=20 failed:
> > Can't connect to MySQL server on 'localhost' (10061)
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Warning: Error
> > getting j
> > ob record for stats: ../../cats/sql_get.c:288 query SELECT
> > VolSessionId,VolSessi
> >
> onTime,PoolId,StartTime,EndTime,JobFiles,JobBytes,JobTDate,Job,JobStatus,Type,Le
> > vel,ClientId,Name,PriorJobId,RealEndTime,JobId FROM Job WHERE JobId=20
> > failed:
> > Can't connect to MySQL server on 'localhost' (10061)
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> > ../../cats/
> > sql_get.c:663 ../../cats/sql_get.c:663 query SELECT
> > ClientId,Name,Uname,AutoPrun
> > e,FileRetention,JobRetention FROM Client WHERE
> > Client.Name='ilemma009-fd' failed
> > :
> > Can't connect to MySQL server on 'localhost' (10061)
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Warning: Error
> > getting c
> > lient record for stats: Client record not found in Catalog.
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> > ../../cats/
> > sql.c:233 ../../cats/sql.c:233 query SELECT count(*) from Media failed:
> > Can't connect to MySQL server on 'localhost' (10061)
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> > ../../cats/
> > sql_get.c:351 ../../cats/sql_get.c:351 query SELECT
> > VolumeName,MAX(VolIndex) FRO
> > M JobMedia,Media WHERE JobMedia.JobId=20 AND
> > JobMedia.MediaId=Media.MediaId GROU
> > P BY VolumeName ORDER BY 2 ASC failed:
> > Can't connect to MySQL server on 'localhost' (10061)
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Error: Bacula
> > 2.0.3 (06M
> > ar07): 23-Mar-2007 18:32:37
> > JobId: 20
> > Job: Client1.2007-03-23_02.03.00
> > Backup Level: Full
> > Client: "ilemma009-fd"
> > FileSet: "Test Set" 2007-03-08 23:05:00
> > Pool: "Default" (From Job resource)
> > Storage: "HPTape" (From Job resource)
> > Scheduled time: 23-Mar-2007 02:03:00
> > Start time: 23-Mar-2007 02:03:03
> > End time: 23-Mar-2007 18:32:37
> > Elapsed time: 16 hours 29 mins 34 secs
> > Priority: 10
> > FD Files Written: 0
> > SD Files Written: 0
> > FD Bytes Written: 0 (0 B)
> > SD Bytes Written: 0 (0 B)
> > Rate: 0.0 KB/s
> > Software Compression: None
> > VSS: no
> > Encryption: no
> > Volume name(s):
> > Volume Session Id: 1
> > Volume Session Time: 1174650862
> > Last Volume Bytes: 0 (0 B)
> > Non-fatal FD errors: 4
> > SD Errors: 0
> > FD termination status: Error
> > SD termination status: Error
> > Termination: *** Backup Error ***
> >
> > 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
> > ../../lib/message
> > .c:492 Mail program terminated in error.
> > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> > Administrato
> > r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
> > ERR=Unknown error
> > 26-Mar 11:33 ilemma009-dir: Start Backup JobId 21,
> > Job=Client1.2007-03-26_11.33.
> > 00
> > 26-Mar 11:33 ilemma009-sd: Job Client1.2007-03-26_11.33.00 waiting.
> > Cannot find
> > any appendable volumes.
> > Please use the "label" command to create a new Volume for:
> > Storage: "HPStorageTape0" (Tape0)
> > Media type: damnedHPUltriumTape
> > Pool: Default
> > 26-Mar 11:33 ilemma009-dir: Client1.2007-03-26_11.33.00 Error:
> > ../../lib/message
> > .c:713 Operator mail program terminated in error.
> > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> > Administrato
> > r" -s "Bacula: Intervention needed for Client1.2007-03-26_11.33.00"
> > Administrato
> > r
> > ERR=Unknown error
> > 26-Mar 12:33 ilemma009-sd: Job Client1.2007-03-26_11.33.00 waiting.
> > Cannot find
> > any appendable volumes.
> > Please use the "label" command to create a new Volume for:
> > Storage: "HPStorageTape0" (Tape0)
> > Media type: damnedHPUltriumTape
> > Pool: Default
> > 26-Mar 12:33 ilemma009-dir: Client1.2007-03-26_11.33.00 Error:
> > ../../lib/message
> > .c:713 Operator mail program terminated in error.
> > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> > Administrato
> > r" -s "Bacula: Intervention needed for Client1.2007-03-26_11.33.00"
> > Administrato
> > r
> > ERR=Unknown error
> > 26-Mar 14:33 ilemma009-sd: Job Client1.2007-03-26_11.33.00 waiting.
> > Cannot find
> > any appendable volumes.
> > Please use the "label" command to create a new Volume for:
> > Storage: "HPStorageTape0" (Tape0)
> > Media type: damnedHPUltriumTape
> > Pool: Default
> > 26-Mar 14:33 ilemma009-dir: Client1.2007-03-26_11.33.00 Error:
> > ../../lib/message
> > .c:713 Operator mail program terminated in error.
> > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> > Administrato
> > r" -s "Bacula: Intervention needed for Client1.2007-03-26_11.33.00"
> > Administrato
> > r
> > ERR=Unknown error
> > 26-Mar 15:04 ilemma009-dir: Start Backup JobId 22,
> > Job=Client1.2007-03-26_15.04.
> > 00
> > 26-Mar 15:04 ilemma009-sd: Failed command:
> > 26-Mar 15:04 ilemma009-sd: Client1.2007-03-26_15.04.00 Fatal error:
> > Device "HPStorageAutochanger" with MediaType
> > "damnedHPUltriumTape" requeste
> > d by DIR not found in SD Device resources.
> > 26-Mar 15:04 ilemma009-dir: Client1.2007-03-26_15.04.00 Fatal error:
> > Storage daemon didn't accept Device "HPStorageAutochanger" because:
> > 3924 Device "HPStorageAutochanger" not in SD Device resources.
> > 26-Mar 15:04 ilemma009-dir: Client1.2007-03-26_15.04.00 Error: Bacula
> > 2.0.3 (06M
> > ar07): 26-Mar-2007 15:04:02
> > JobId: 22
> > Job: Client1.2007-03-26_15.04.00
> > Backup Level: Full
> > Client: "ilemma009-fd" 2.0.3 (06Mar07)
> > Linux,Cross-compile,Win
> > 32
> > FileSet: "Test Set" 2007-03-08 23:05:00
> > Pool: "Default" (From Job resource)
> > Storage: "HPTape" (From Job resource)
> > Scheduled time: 26-Mar-2007 15:04:00
> > Start time: 26-Mar-2007 15:04:02
> > End time: 26-Mar-2007 15:04:02
> > Elapsed time: 0 secs
> > Priority: 10
> > FD Files Written: 0
> > SD Files Written: 0
> > FD Bytes Written: 0 (0 B)
> > SD Bytes Written: 0 (0 B)
> > Rate: 0.0 KB/s
> > Software Compression: None
> > VSS: no
> > Encryption: no
> > Volume name(s):
> > Volume Session Id: 1
> > Volume Session Time: 1174921327
> > Last Volume Bytes: 0 (0 B)
> > Non-fatal FD errors: 0
> > SD Errors: 0
> > FD termination status:
> > SD termination status:
> > Termination: *** Backup Error ***
> >
> > 26-Mar 15:04 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> > ../../tool
> > s/bsmtp.c:300 Error unknown mail host "@smtp_host@": ERR=No error
> > 26-Mar 15:04 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> > ../../tool
> > s/bsmtp.c:302 Retrying connection using "localhost".
> > 26-Mar 15:04 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> > ../../tool
> > s/bsmtp.c:329 Fatal connect error to localhost: ERR=No error
> > 26-Mar 15:04 ilemma009-dir: Client1.2007-03-26_15.04.00 Error:
> > ../../lib/message
> > .c:492 Mail program terminated in error.
> > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> > Administrato
> > r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
> > ERR=Unknown error
> > 26-Mar 15:07 ilemma009-dir: Start Backup JobId 23,
> > Job=Client1.2007-03-26_15.07.
> > 00
> > 26-Mar 15:07 ilemma009-sd: Failed command:
> > 26-Mar 15:07 ilemma009-sd: Client1.2007-03-26_15.07.00 Fatal error:
> > Device "HPStorageAutochanger" with MediaType
> > "damnedHPUltriumTape" requeste
> > d by DIR not found in SD Device resources.
> > 26-Mar 15:07 ilemma009-dir: Client1.2007-03-26_15.07.00 Fatal error:
> > Storage daemon didn't accept Device "HPStorageAutochanger" because:
> > 3924 Device "HPStorageAutochanger" not in SD Device resources.
> > 26-Mar 15:07 ilemma009-dir: Client1.2007-03-26_15.07.00 Error: Bacula
> > 2.0.3 (06M
> > ar07): 26-Mar-2007 15:07:02
> > JobId: 23
> > Job: Client1.2007-03-26_15.07.00
> > Backup Level: Full
> > Client: "ilemma009-fd" 2.0.3 (06Mar07)
> > Linux,Cross-compile,Win
> > 32
> > FileSet: "Test Set" 2007-03-08 23:05:00
> > Pool: "Default" (From Job resource)
> > Storage: "HPTape" (From Job resource)
> > Scheduled time: 26-Mar-2007 15:07:00
> > Start time: 26-Mar-2007 15:07:02
> > End time: 26-Mar-2007 15:07:02
> > Elapsed time: 0 secs
> > Priority: 10
> > FD Files Written: 0
> > SD Files Written: 0
> > FD Bytes Written: 0 (0 B)
> > SD Bytes Written: 0 (0 B)
> > Rate: 0.0 KB/s
> > Software Compression: None
> > VSS: no
> > Encryption: no
> > Volume name(s):
> > Volume Session Id: 1
> > Volume Session Time: 1174921579
> > Last Volume Bytes: 0 (0 B)
> > Non-fatal FD errors: 0
> > SD Errors: 0
> > FD termination status:
> > SD termination status:
> > Termination: *** Backup Error ***
> >
> > 26-Mar 15:07 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> > ../../tool
> > s/bsmtp.c:300 Error unknown mail host "@smtp_host@": ERR=No error
> > 26-Mar 15:07 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> > ../../tool
> > s/bsmtp.c:302 Retrying connection using "localhost".
> > 26-Mar 15:07 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> > ../../tool
> > s/bsmtp.c:329 Fatal connect error to localhost: ERR=No error
> > 26-Mar 15:07 ilemma009-dir: Client1.2007-03-26_15.07.00 Error:
> > ../../lib/message
> > .c:492 Mail program terminated in error.
> > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> > Administrato
> > r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
> > ERR=Unknown error
> > 26-Mar 15:10 ilemma009-dir: Start Backup JobId 24,
> > Job=Client1.2007-03-26_15.10.
> > 00
> > 26-Mar 15:10 ilemma009-sd: Failed command:
> > 26-Mar 15:10 ilemma009-sd: Client1.2007-03-26_15.10.00 Fatal error:
> > Device "HPStorageAutochanger" with MediaType
> > "damnedHPUltriumTape" requeste
> > d by DIR not found in SD Device resources.
> > 26-Mar 15:10 ilemma009-dir: Client1.2007-03-26_15.10.00 Fatal error:
> > Storage daemon didn't accept Device "HPStorageAutochanger" because:
> > 3924 Device "HPStorageAutochanger" not in SD Device resources.
> > 26-Mar 15:10 ilemma009-dir: Client1.2007-03-26_15.10.00 Error: Bacula
> > 2.0.3 (06M
> > ar07): 26-Mar-2007 15:10:02
> > JobId: 24
> > Job: Client1.2007-03-26_15.10.00
> > Backup Level: Full
> > Client: "ilemma009-fd" 2.0.3 (06Mar07)
> > Linux,Cross-compile,Win
> > 32
> > FileSet: "Test Set" 2007-03-08 23:05:00
> > Pool: "Default" (From Job resource)
> > Storage: "HPTape" (From Job resource)
> > Scheduled time: 26-Mar-2007 15:10:00
> > Start time: 26-Mar-2007 15:10:02
> > End time: 26-Mar-2007 15:10:02
> > Elapsed time: 0 secs
> > Priority: 10
> > FD Files Written: 0
> > SD Files Written: 0
> > FD Bytes Written: 0 (0 B)
> > SD Bytes Written: 0 (0 B)
> > Rate: 0.0 KB/s
> > Software Compression: None
> > VSS: no
> > Encryption: no
> > Volume name(s):
> > Volume Session Id: 1
> > Volume Session Time: 1174921699
> > Last Volume Bytes: 0 (0 B)
> > Non-fatal FD errors: 0
> > SD Errors: 0
> > FD termination status:
> > SD termination status:
> > Termination: *** Backup Error ***
> >
> > 26-Mar 15:10 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> > ../../tool
> > s/bsmtp.c:300 Error unknown mail host "@smtp_host@": ERR=No error
> > 26-Mar 15:10 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> > ../../tool
> > s/bsmtp.c:302 Retrying connection using "localhost".
> > 26-Mar 15:10 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> > ../../tool
> > s/bsmtp.c:329 Fatal connect error to localhost: ERR=No error
> > 26-Mar 15:10 ilemma009-dir: Client1.2007-03-26_15.10.00 Error:
> > ../../lib/message
> > .c:492 Mail program terminated in error.
> > CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> > Administrato
> > r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
> > ERR=Unknown error
> > *
> >
> > ----- Message d'origine ----
> > De : Kern Sibbald <[EMAIL PROTECTED]>
> > À : bacula-users@lists.sourceforge.net
> > Cc : Brian Debelius <[EMAIL PROTECTED]>; [EMAIL PROTECTED]
> > Envoyé le : Lundi, 26 Mars 2007, 14h40mn 00s
> > Objet : Re: [Bacula-users] Re : Windows::Permission denied
> >
> > I don't think that will work. I recommend that you do not put min/max
> > block
> > size directives unless you are forced to, and almost certainly Bacula
> > will
> > not work with those values, which are what the drive supports but not
> > approprate for Bacula blocks.
> >
> > On Monday 26 March 2007 15:53, Brian Debelius wrote:
> > > Changes below in bold
> > >
> > >
> > > Device {
> > > Name = HPStorageTape0
> > > Archive Device = Tape0
> > > Drive Index = 0
> > > Device Type = Tape
> > > Changer Device = 4:0:5:1
> > > Media Type = "*HPUltriumTape*"
> > > Autochanger = yes
> > > *LabelMedia = yes
> > > AutomaticMount = yes*
> > > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
> > > Autoselect = yes
> > > Always Open = *no*
> > > Removable media = yes
> > > Random access = no
> > > Requires Mount = no
> > > Minimum block size = *1*
> > > Maximum block size = *16777215*
> > > }
> > >
> > > Device {
> > > Name = HPStorageTape1
> > > Archive Device = Tape1
> > > Drive Index = 1
> > > Device Type = Tape
> > > Changer Device = 4:0:5:1
> > > Media Type = "*HPUltriumTape*"
> > > Autochanger = yes
> > > *LabelMedia = yes
> > > AutomaticMount = yes*
> > > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
> > > Autoselect = yes
> > > Always Open = *no*
> > > Removable media = yes
> > > Random access = no
> > > Requires Mount = no
> > > Minimum block size = *1*
> > > Maximum block size = *16777215*
> > >
> > > }
> > >
> > > Autochanger {
> > > Name = HPStorageAutochanger
> > > Device = HPStorageTape0,HPStorageTape1
> > > Changer Command = "mtx-changer %c %o %S %a %d"
> > > Changer Device = 4:0:5:1
> > > # Label media = yes
> > > # Automatic mount = yes
> > > }
> > > [EMAIL PROTECTED] wrote:
> > > > C:\Program Files\Bacula\bin>tapeinfo -f Tape0
> > > > Product Type: Tape Drive
> > > > Vendor ID: 'HP '
> > > > Product ID: 'Ultrium 1-SCSI '
> > > > Revision: 'P54W'
> > > > Attached Changer API: No
> > > > SerialNumber: 'HU10628AN8'
> > > > MinBlock:1
> > > > MaxBlock:16777215
> > > > SCSI ID: 0
> > > > SCSI LUN: 0
> > > > Ready: no
> > > >
> > > > Device {
> > > > Name = HPStorageTape0Archive Device = Tape0
> > > > Device Type = Tape
> > > > Media Type = "*HPUltriumTape*"
> > > > Autochanger = yes
> > > > Changer Device = 4:0:5:1
> > > > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
> > > >
> > > > Autoselect = yes
> > > > Always Open = yes
> > > > Removable media = yes
> > > > Random access = no
> > > > Requires Mount = no
> > > > Minimum block size = 100
> > > > Maximum block size = 100
> > > > }
> > > >
> > > > Device {
> > > > Name = HPStorageTape1
> > > > Archive Device = Tape1
> > > > Device Type = Tape
> > > > Media Type = "damnedHPUltriumTape"
> > > > Autochanger = yes
> > > > Changer Device = 4:0:5:1
> > > > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
> > > > Drive Index = 1
> > > > Autoselect = yes
> > > > Always Open = yes
> > > > Removable media = yes
> > > > Random access = no
> > > > Requires Mount = no
> > > > Minimum block size = 100
> > > > Maximum block size = 100
> > > > }
> > > >
> > > > Autochanger {
> > > > Name = HPStorageAutochanger
> > > > Device = HPStorageTape0,HPStorageTape1
> > > > Changer Command = "mtx-changer %c %o %S %a %d"
> > > > Changer Device = 4:0:5:1
> > > > # Label media = yes
> > > > # Automatic mount = yes
> > > > }
> > >
> > >
> >
> >
> > ------------------------------------------------------------------------
> > Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
> > questions ! Profitez des connaissances, des opinions et des
> > expériences des internautes sur Yahoo! Questions/Réponses
> > <http://fr.rd.yahoo.com/evt=42054/*http://fr.answers.yahoo.com>.
>
>
>
> ------------------------------------------------------------------------
> Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
> questions ! Profitez des connaissances, des opinions et des
> expériences des internautes sur Yahoo! Questions/Réponses
> <http://fr.rd.yahoo.com/evt=42054/*http://fr.answers.yahoo.com>.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
