Nawfel, you are getting ahead of yourself. Try taking out the min and
max like kern suggested.
after you make the changes, load a tape into Tape0
goto your bacula program directory and run
btape -c "c:\program files\all users\application
data\bacula\bacula-sd.conf" Tape0
enter 'test' at the prompt
[EMAIL PROTECTED] wrote:
> with or without the Min/Max block size params I get the following
> message :
>
> ilemma009-sd Version: 2.0.3 (06 March 2007) Linux Cross-compile Win32
> Daemon started 26-Mar-07 15:08, 1 Job run since started.
> Heap: bytes=18,066 max_bytes=114,757 bufs=80 max_bufs=93
>
> Running Jobs:
> No Jobs running.
> ====
>
> Jobs waiting to reserve a drive:
> ====
>
> Terminated Jobs:
> JobId Level Files Bytes Status Finished Name
> ===================================================================
> 22 Full 0 0 Error 26-Mar-07 15:04 Client1
> 24 Full 0 0 Error 26-Mar-07 15:10 Client1
> ====
>
> Device status:
> Autochanger "HPStorageAutochanger" with devices:
> "HPStorageTape0" (Tape0)
> "HPStorageTape1" (Tape1)
> Device "HPStorageTape0" (Tape0) is not open.
> Slot 1 is loaded in drive 0.
> Device "HPStorageTape1" (Tape1) is not open.
> Drive 1 status unknown.
> ====
>
> In Use Volume status:
> ====
>
>
> when I type "messages " in the bconsole I get the following : (sorry
> for the lenth ! and thank you for your interest)
>
> 23-Mar 03:03 ilemma009-sd: Job Client1.2007-03-23_02.03.00 waiting.
> Cannot find
> any appendable volumes.
> Please use the "label" command to create a new Volume for:
> Storage: "HPStorageTape0" (Tape0)
> Media type: damnedHPUltriumTape
> Pool: Default
> 23-Mar 03:03 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
> ../../lib/message
> .c:713 Operator mail program terminated in error.
> CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> Administrato
> r" -s "Bacula: Intervention needed for Client1.2007-03-23_02.03.00"
> Administrato
> r
> ERR=Unknown error
> 23-Mar 05:03 ilemma009-sd: Job Client1.2007-03-23_02.03.00 waiting.
> Cannot find
> any appendable volumes.
> Please use the "label" command to create a new Volume for:
> Storage: "HPStorageTape0" (Tape0)
> Media type: damnedHPUltriumTape
> Pool: Default
> 23-Mar 05:03 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
> ../../lib/message
> .c:713 Operator mail program terminated in error.
> CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> Administrato
> r" -s "Bacula: Intervention needed for Client1.2007-03-23_02.03.00"
> Administrato
> r
> ERR=Unknown error
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> Network err
> or with FD during Backup: ERR=Broken pipe
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> No Job stat
> us returned from FD.
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
> ../../cats/sql_up
> date.c:194 ../../cats/sql_update.c:194 update UPDATE Job SET
> JobStatus='f',EndTi
> me='2007-03-23
> 18:32:37',ClientId=1,JobBytes=0,JobFiles=0,JobErrors=3,VolSession
> Id=1,VolSessionTime=1174650862,PoolId=1,FileSetId=1,JobTDate=1174674757,RealEndT
> ime='2007-03-23 18:32:37',PriorJobId=0 WHERE JobId=20 failed:
> Can't connect to MySQL server on 'localhost' (10061)
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Warning: Error
> updating
> job record. ../../cats/sql_update.c:194 update UPDATE Job SET
> JobStatus='f',EndT
> ime='2007-03-23
> 18:32:37',ClientId=1,JobBytes=0,JobFiles=0,JobErrors=3,VolSessio
> nId=1,VolSessionTime=1174650862,PoolId=1,FileSetId=1,JobTDate=1174674757,RealEnd
> Time='2007-03-23 18:32:37',PriorJobId=0 WHERE JobId=20 failed:
> Can't connect to MySQL server on 'localhost' (10061)
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> ../../cats/
> sql_get.c:288 ../../cats/sql_get.c:288 query SELECT
> VolSessionId,VolSessionTime,
> PoolId,StartTime,EndTime,JobFiles,JobBytes,JobTDate,Job,JobStatus,Type,Level,Cli
> entId,Name,PriorJobId,RealEndTime,JobId FROM Job WHERE JobId=20 failed:
> Can't connect to MySQL server on 'localhost' (10061)
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Warning: Error
> getting j
> ob record for stats: ../../cats/sql_get.c:288 query SELECT
> VolSessionId,VolSessi
> onTime,PoolId,StartTime,EndTime,JobFiles,JobBytes,JobTDate,Job,JobStatus,Type,Le
> vel,ClientId,Name,PriorJobId,RealEndTime,JobId FROM Job WHERE JobId=20
> failed:
> Can't connect to MySQL server on 'localhost' (10061)
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> ../../cats/
> sql_get.c:663 ../../cats/sql_get.c:663 query SELECT
> ClientId,Name,Uname,AutoPrun
> e,FileRetention,JobRetention FROM Client WHERE
> Client.Name='ilemma009-fd' failed
> :
> Can't connect to MySQL server on 'localhost' (10061)
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Warning: Error
> getting c
> lient record for stats: Client record not found in Catalog.
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> ../../cats/
> sql.c:233 ../../cats/sql.c:233 query SELECT count(*) from Media failed:
> Can't connect to MySQL server on 'localhost' (10061)
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Fatal error:
> ../../cats/
> sql_get.c:351 ../../cats/sql_get.c:351 query SELECT
> VolumeName,MAX(VolIndex) FRO
> M JobMedia,Media WHERE JobMedia.JobId=20 AND
> JobMedia.MediaId=Media.MediaId GROU
> P BY VolumeName ORDER BY 2 ASC failed:
> Can't connect to MySQL server on 'localhost' (10061)
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Error: Bacula
> 2.0.3 (06M
> ar07): 23-Mar-2007 18:32:37
> JobId: 20
> Job: Client1.2007-03-23_02.03.00
> Backup Level: Full
> Client: "ilemma009-fd"
> FileSet: "Test Set" 2007-03-08 23:05:00
> Pool: "Default" (From Job resource)
> Storage: "HPTape" (From Job resource)
> Scheduled time: 23-Mar-2007 02:03:00
> Start time: 23-Mar-2007 02:03:03
> End time: 23-Mar-2007 18:32:37
> Elapsed time: 16 hours 29 mins 34 secs
> Priority: 10
> FD Files Written: 0
> SD Files Written: 0
> FD Bytes Written: 0 (0 B)
> SD Bytes Written: 0 (0 B)
> Rate: 0.0 KB/s
> Software Compression: None
> VSS: no
> Encryption: no
> Volume name(s):
> Volume Session Id: 1
> Volume Session Time: 1174650862
> Last Volume Bytes: 0 (0 B)
> Non-fatal FD errors: 4
> SD Errors: 0
> FD termination status: Error
> SD termination status: Error
> Termination: *** Backup Error ***
>
> 23-Mar 18:32 ilemma009-dir: Client1.2007-03-23_02.03.00 Error:
> ../../lib/message
> .c:492 Mail program terminated in error.
> CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> Administrato
> r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
> ERR=Unknown error
> 26-Mar 11:33 ilemma009-dir: Start Backup JobId 21,
> Job=Client1.2007-03-26_11.33.
> 00
> 26-Mar 11:33 ilemma009-sd: Job Client1.2007-03-26_11.33.00 waiting.
> Cannot find
> any appendable volumes.
> Please use the "label" command to create a new Volume for:
> Storage: "HPStorageTape0" (Tape0)
> Media type: damnedHPUltriumTape
> Pool: Default
> 26-Mar 11:33 ilemma009-dir: Client1.2007-03-26_11.33.00 Error:
> ../../lib/message
> .c:713 Operator mail program terminated in error.
> CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> Administrato
> r" -s "Bacula: Intervention needed for Client1.2007-03-26_11.33.00"
> Administrato
> r
> ERR=Unknown error
> 26-Mar 12:33 ilemma009-sd: Job Client1.2007-03-26_11.33.00 waiting.
> Cannot find
> any appendable volumes.
> Please use the "label" command to create a new Volume for:
> Storage: "HPStorageTape0" (Tape0)
> Media type: damnedHPUltriumTape
> Pool: Default
> 26-Mar 12:33 ilemma009-dir: Client1.2007-03-26_11.33.00 Error:
> ../../lib/message
> .c:713 Operator mail program terminated in error.
> CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> Administrato
> r" -s "Bacula: Intervention needed for Client1.2007-03-26_11.33.00"
> Administrato
> r
> ERR=Unknown error
> 26-Mar 14:33 ilemma009-sd: Job Client1.2007-03-26_11.33.00 waiting.
> Cannot find
> any appendable volumes.
> Please use the "label" command to create a new Volume for:
> Storage: "HPStorageTape0" (Tape0)
> Media type: damnedHPUltriumTape
> Pool: Default
> 26-Mar 14:33 ilemma009-dir: Client1.2007-03-26_11.33.00 Error:
> ../../lib/message
> .c:713 Operator mail program terminated in error.
> CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> Administrato
> r" -s "Bacula: Intervention needed for Client1.2007-03-26_11.33.00"
> Administrato
> r
> ERR=Unknown error
> 26-Mar 15:04 ilemma009-dir: Start Backup JobId 22,
> Job=Client1.2007-03-26_15.04.
> 00
> 26-Mar 15:04 ilemma009-sd: Failed command:
> 26-Mar 15:04 ilemma009-sd: Client1.2007-03-26_15.04.00 Fatal error:
> Device "HPStorageAutochanger" with MediaType
> "damnedHPUltriumTape" requeste
> d by DIR not found in SD Device resources.
> 26-Mar 15:04 ilemma009-dir: Client1.2007-03-26_15.04.00 Fatal error:
> Storage daemon didn't accept Device "HPStorageAutochanger" because:
> 3924 Device "HPStorageAutochanger" not in SD Device resources.
> 26-Mar 15:04 ilemma009-dir: Client1.2007-03-26_15.04.00 Error: Bacula
> 2.0.3 (06M
> ar07): 26-Mar-2007 15:04:02
> JobId: 22
> Job: Client1.2007-03-26_15.04.00
> Backup Level: Full
> Client: "ilemma009-fd" 2.0.3 (06Mar07)
> Linux,Cross-compile,Win
> 32
> FileSet: "Test Set" 2007-03-08 23:05:00
> Pool: "Default" (From Job resource)
> Storage: "HPTape" (From Job resource)
> Scheduled time: 26-Mar-2007 15:04:00
> Start time: 26-Mar-2007 15:04:02
> End time: 26-Mar-2007 15:04:02
> Elapsed time: 0 secs
> Priority: 10
> FD Files Written: 0
> SD Files Written: 0
> FD Bytes Written: 0 (0 B)
> SD Bytes Written: 0 (0 B)
> Rate: 0.0 KB/s
> Software Compression: None
> VSS: no
> Encryption: no
> Volume name(s):
> Volume Session Id: 1
> Volume Session Time: 1174921327
> Last Volume Bytes: 0 (0 B)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status:
> SD termination status:
> Termination: *** Backup Error ***
>
> 26-Mar 15:04 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> ../../tool
> s/bsmtp.c:300 Error unknown mail host "@smtp_host@": ERR=No error
> 26-Mar 15:04 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> ../../tool
> s/bsmtp.c:302 Retrying connection using "localhost".
> 26-Mar 15:04 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> ../../tool
> s/bsmtp.c:329 Fatal connect error to localhost: ERR=No error
> 26-Mar 15:04 ilemma009-dir: Client1.2007-03-26_15.04.00 Error:
> ../../lib/message
> .c:492 Mail program terminated in error.
> CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> Administrato
> r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
> ERR=Unknown error
> 26-Mar 15:07 ilemma009-dir: Start Backup JobId 23,
> Job=Client1.2007-03-26_15.07.
> 00
> 26-Mar 15:07 ilemma009-sd: Failed command:
> 26-Mar 15:07 ilemma009-sd: Client1.2007-03-26_15.07.00 Fatal error:
> Device "HPStorageAutochanger" with MediaType
> "damnedHPUltriumTape" requeste
> d by DIR not found in SD Device resources.
> 26-Mar 15:07 ilemma009-dir: Client1.2007-03-26_15.07.00 Fatal error:
> Storage daemon didn't accept Device "HPStorageAutochanger" because:
> 3924 Device "HPStorageAutochanger" not in SD Device resources.
> 26-Mar 15:07 ilemma009-dir: Client1.2007-03-26_15.07.00 Error: Bacula
> 2.0.3 (06M
> ar07): 26-Mar-2007 15:07:02
> JobId: 23
> Job: Client1.2007-03-26_15.07.00
> Backup Level: Full
> Client: "ilemma009-fd" 2.0.3 (06Mar07)
> Linux,Cross-compile,Win
> 32
> FileSet: "Test Set" 2007-03-08 23:05:00
> Pool: "Default" (From Job resource)
> Storage: "HPTape" (From Job resource)
> Scheduled time: 26-Mar-2007 15:07:00
> Start time: 26-Mar-2007 15:07:02
> End time: 26-Mar-2007 15:07:02
> Elapsed time: 0 secs
> Priority: 10
> FD Files Written: 0
> SD Files Written: 0
> FD Bytes Written: 0 (0 B)
> SD Bytes Written: 0 (0 B)
> Rate: 0.0 KB/s
> Software Compression: None
> VSS: no
> Encryption: no
> Volume name(s):
> Volume Session Id: 1
> Volume Session Time: 1174921579
> Last Volume Bytes: 0 (0 B)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status:
> SD termination status:
> Termination: *** Backup Error ***
>
> 26-Mar 15:07 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> ../../tool
> s/bsmtp.c:300 Error unknown mail host "@smtp_host@": ERR=No error
> 26-Mar 15:07 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> ../../tool
> s/bsmtp.c:302 Retrying connection using "localhost".
> 26-Mar 15:07 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> ../../tool
> s/bsmtp.c:329 Fatal connect error to localhost: ERR=No error
> 26-Mar 15:07 ilemma009-dir: Client1.2007-03-26_15.07.00 Error:
> ../../lib/message
> .c:492 Mail program terminated in error.
> CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> Administrato
> r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
> ERR=Unknown error
> 26-Mar 15:10 ilemma009-dir: Start Backup JobId 24,
> Job=Client1.2007-03-26_15.10.
> 00
> 26-Mar 15:10 ilemma009-sd: Failed command:
> 26-Mar 15:10 ilemma009-sd: Client1.2007-03-26_15.10.00 Fatal error:
> Device "HPStorageAutochanger" with MediaType
> "damnedHPUltriumTape" requeste
> d by DIR not found in SD Device resources.
> 26-Mar 15:10 ilemma009-dir: Client1.2007-03-26_15.10.00 Fatal error:
> Storage daemon didn't accept Device "HPStorageAutochanger" because:
> 3924 Device "HPStorageAutochanger" not in SD Device resources.
> 26-Mar 15:10 ilemma009-dir: Client1.2007-03-26_15.10.00 Error: Bacula
> 2.0.3 (06M
> ar07): 26-Mar-2007 15:10:02
> JobId: 24
> Job: Client1.2007-03-26_15.10.00
> Backup Level: Full
> Client: "ilemma009-fd" 2.0.3 (06Mar07)
> Linux,Cross-compile,Win
> 32
> FileSet: "Test Set" 2007-03-08 23:05:00
> Pool: "Default" (From Job resource)
> Storage: "HPTape" (From Job resource)
> Scheduled time: 26-Mar-2007 15:10:00
> Start time: 26-Mar-2007 15:10:02
> End time: 26-Mar-2007 15:10:02
> Elapsed time: 0 secs
> Priority: 10
> FD Files Written: 0
> SD Files Written: 0
> FD Bytes Written: 0 (0 B)
> SD Bytes Written: 0 (0 B)
> Rate: 0.0 KB/s
> Software Compression: None
> VSS: no
> Encryption: no
> Volume name(s):
> Volume Session Id: 1
> Volume Session Time: 1174921699
> Last Volume Bytes: 0 (0 B)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status:
> SD termination status:
> Termination: *** Backup Error ***
>
> 26-Mar 15:10 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> ../../tool
> s/bsmtp.c:300 Error unknown mail host "@smtp_host@": ERR=No error
> 26-Mar 15:10 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> ../../tool
> s/bsmtp.c:302 Retrying connection using "localhost".
> 26-Mar 15:10 ilemma009-dir: ../../lib/message.c:481 Mail prog: bsmtp:
> ../../tool
> s/bsmtp.c:329 Fatal connect error to localhost: ERR=No error
> 26-Mar 15:10 ilemma009-dir: Client1.2007-03-26_15.10.00 Error:
> ../../lib/message
> .c:492 Mail program terminated in error.
> CMD="C:\Program Files\Bacula\bin\bsmtp" -h @smtp_host@ -f "(Bacula)
> Administrato
> r" -s "Bacula: Backup Fatal Error of ilemma009-fd Full" Administrator
> ERR=Unknown error
> *
>
> ----- Message d'origine ----
> De : Kern Sibbald <[EMAIL PROTECTED]>
> À : bacula-users@lists.sourceforge.net
> Cc : Brian Debelius <[EMAIL PROTECTED]>; [EMAIL PROTECTED]
> Envoyé le : Lundi, 26 Mars 2007, 14h40mn 00s
> Objet : Re: [Bacula-users] Re : Windows::Permission denied
>
> I don't think that will work. I recommend that you do not put min/max
> block
> size directives unless you are forced to, and almost certainly Bacula
> will
> not work with those values, which are what the drive supports but not
> approprate for Bacula blocks.
>
> On Monday 26 March 2007 15:53, Brian Debelius wrote:
> > Changes below in bold
> >
> >
> > Device {
> > Name = HPStorageTape0
> > Archive Device = Tape0
> > Drive Index = 0
> > Device Type = Tape
> > Changer Device = 4:0:5:1
> > Media Type = "*HPUltriumTape*"
> > Autochanger = yes
> > *LabelMedia = yes
> > AutomaticMount = yes*
> > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
> > Autoselect = yes
> > Always Open = *no*
> > Removable media = yes
> > Random access = no
> > Requires Mount = no
> > Minimum block size = *1*
> > Maximum block size = *16777215*
> > }
> >
> > Device {
> > Name = HPStorageTape1
> > Archive Device = Tape1
> > Drive Index = 1
> > Device Type = Tape
> > Changer Device = 4:0:5:1
> > Media Type = "*HPUltriumTape*"
> > Autochanger = yes
> > *LabelMedia = yes
> > AutomaticMount = yes*
> > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
> > Autoselect = yes
> > Always Open = *no*
> > Removable media = yes
> > Random access = no
> > Requires Mount = no
> > Minimum block size = *1*
> > Maximum block size = *16777215*
> >
> > }
> >
> > Autochanger {
> > Name = HPStorageAutochanger
> > Device = HPStorageTape0,HPStorageTape1
> > Changer Command = "mtx-changer %c %o %S %a %d"
> > Changer Device = 4:0:5:1
> > # Label media = yes
> > # Automatic mount = yes
> > }
> > [EMAIL PROTECTED] wrote:
> > > C:\Program Files\Bacula\bin>tapeinfo -f Tape0
> > > Product Type: Tape Drive
> > > Vendor ID: 'HP '
> > > Product ID: 'Ultrium 1-SCSI '
> > > Revision: 'P54W'
> > > Attached Changer API: No
> > > SerialNumber: 'HU10628AN8'
> > > MinBlock:1
> > > MaxBlock:16777215
> > > SCSI ID: 0
> > > SCSI LUN: 0
> > > Ready: no
> > >
> > > Device {
> > > Name = HPStorageTape0Archive Device = Tape0
> > > Device Type = Tape
> > > Media Type = "*HPUltriumTape*"
> > > Autochanger = yes
> > > Changer Device = 4:0:5:1
> > > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
> > >
> > > Autoselect = yes
> > > Always Open = yes
> > > Removable media = yes
> > > Random access = no
> > > Requires Mount = no
> > > Minimum block size = 100
> > > Maximum block size = 100
> > > }
> > >
> > > Device {
> > > Name = HPStorageTape1
> > > Archive Device = Tape1
> > > Device Type = Tape
> > > Media Type = "damnedHPUltriumTape"
> > > Autochanger = yes
> > > Changer Device = 4:0:5:1
> > > Alert Command = "tapeinfo -f %c | findstr TapeAlert"
> > > Drive Index = 1
> > > Autoselect = yes
> > > Always Open = yes
> > > Removable media = yes
> > > Random access = no
> > > Requires Mount = no
> > > Minimum block size = 100
> > > Maximum block size = 100
> > > }
> > >
> > > Autochanger {
> > > Name = HPStorageAutochanger
> > > Device = HPStorageTape0,HPStorageTape1
> > > Changer Command = "mtx-changer %c %o %S %a %d"
> > > Changer Device = 4:0:5:1
> > > # Label media = yes
> > > # Automatic mount = yes
> > > }
> >
> >
>
>
> ------------------------------------------------------------------------
> Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
> questions ! Profitez des connaissances, des opinions et des
> expériences des internautes sur Yahoo! Questions/Réponses
> <http://fr.rd.yahoo.com/evt=42054/*http://fr.answers.yahoo.com>.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
