OK. Some progress!
I can telnet and ping OK. Everyone can ping each other via hostnames and
IPs. Now I run the console with /usr/bin/bconsole -d200 every time to
get verbose output.
I then tried changing my config files to use IP addresses instead of
FQDNs. No luck there though.
Your firewall thought gave me an idea, though. I just tried having the
Bacula server backup a directory on it's own HDD to the changer which is
directly connected to it via SCSI. That didn't work either. :(
I then tried going back to my config setup that did work -- the one that
backs up to the backup server's HDD -- and changing, very carefully,
only the "Storage" items to the information on my changer.
This makes me think there is some weird thing wrong with my
bacula-dir.conf file where the changer is referenced.
I now get the error below:
*status storage
Using default Catalog name=MyCatalog DB=bacula
The defined Storage resources are:
1: LTO-3
2: superloader
Select Storage resource (1-2): bconsole: console.c:290 Got poll BNET_PROMPT
1
Connecting to Storage daemon LTO-3 at bmm-s1.bmmad.internal:9103
Failed to connect to Storage daemon LTO-3.
====
You have messages.
bconsole: console.c:290 Got poll BNET_EOD
*messages
16-Mar 14:26 bmm-s1-dir: *Console*.2007-03-16_14.26.07 Error: bnet.c:685
gethostbyname() for host "bmm-s1.bmmad.internal" failed:
ERR=Authoritative answer for host not found.
16-Mar 15:38 bmm-s1-dir: *Console*.2007-03-16_15.38.37 Error: bnet.c:685
gethostbyname() for host "bmm-s1.bmmad.internal" failed:
ERR=Authoritative answer for host not found.
bconsole: console.c:290 Got poll BNET_EOD
*bconsole: console.c:290 Got poll BNET_EOD
Here is my Storage bit (which I think might be wrong):
Storage {
Name = LTO-3 # Do not use "localhost" here
Address = bmm-s1.bmmad.internal # N.B. Use a fully qualified name here
SDPort = 9103
Password = ""
Device = LTO-3
Media Type = LTO-3
}
I also changed any "Storage =" item from File to LTO-3. I *think*
between this and the storage directive above lies my problem. Do you see
anything that doesn't look right there?
My updated bacula-dir.conf file is below. Thanks again for all your help!!
Mike
[EMAIL PROTECTED]:/etc/bacula# cat bacula-dir.conf
#
# Default Bacula Director Configuration file
#
# The only thing that MUST be changed is to add one or more
# file or directory names in the Include directive of the
# FileSet resource.
#
# For Bacula release 1.36.3 (22 April 2005) -- debian testing/unstable
#
# You might also want to change the default email address
# from root to your address. See the "mail" and "operator"
# directives in the Messages resource.
#
Director { # define myself
Name = bmm-s1-dir
DIRport = 9101 # where we listen for UA connections
QueryFile = "/etc/bacula/scripts/query.sql"
WorkingDirectory = "/var/lib/bacula"
PidDirectory = "/var/run/bacula"
Maximum Concurrent Jobs = 1
Password = "" # Console password
Messages = Daemon
}
JobDefs {
Name = "DefaultJob"
Type = Backup
Level = Full
Client = bmm-s1-fd
FileSet = "Full Set"
Schedule = "WeeklyCycle"
Storage = LTO-3
Messages = Standard
Pool = Default
Priority = 10
}
#
# Define the main nightly save backup job
# By default, this job will back up to disk in /tmp
Job {
Name = "Client1"
JobDefs = "DefaultJob"
Write Bootstrap = "/var/lib/bacula/Client1.bsr"
}
# Backup the catalog database (after the nightly save)
Job {
Name = "BackupCatalog"
JobDefs = "DefaultJob"
Level = Full
FileSet="Catalog"
Schedule = "WeeklyCycleAfterBackup"
# This creates an ASCII copy of the catalog
RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup -u<user>
-p<password>"
# This deletes the copy of the catalog
RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup"
Write Bootstrap = "/var/lib/bacula/BackupCatalog.bsr"
Priority = 11 # run after main backup
}
# Standard Restore template, to be changed by Console program
Job {
Name = "RestoreFiles"
Type = Restore
Client=bmm-s1-fd
FileSet="Full Set"
Storage = LTO-3
Pool = Default
Messages = Standard
Where = /tmp/bacula-restores
}
# List of files to be backed up
FileSet {
Name = "Full Set"
Include {
File = /home/mike
Options { compression=GZIP
signature = MD5 }
}
#
# Put your list of files here, preceded by 'File =', one per line
# or include an external list with:
#
# File = <file-name
#
# Note: / backs up everything on the root partition.
# if you have other partitons such as /usr or /home
# you will probably want to add them too.
#
# By default this is defined to point to the Bacula build
# directory to give a reasonable FileSet to backup to
# disk storage during initial testing.
#
# File = /build/buildd/bacula-1.36.3
# }
#
# If you backup the root directory, the following two excluded
# files can be useful
#
Exclude {
File = /proc
File = /tmp
File = /.journal
File = /.fsck
}
}
#
# When to do the backups, full backup on first sunday of the month,
# differential (i.e. incremental since full) every other sunday,
# and incremental backups other days
Schedule {
Name = "WeeklyCycle"
Run = Full 1st sun at 1:05
Run = Differential 2nd-5th sun at 1:05
Run = Incremental mon-sat at 1:05
}
# This schedule does the catalog. It starts after the WeeklyCycle
Schedule {
Name = "WeeklyCycleAfterBackup"
Run = Full sun-sat at 1:10
}
# This is the backup of the catalog
FileSet {
Name = "Catalog"
Include {
Options {
signature = MD5
}
File = /var/lib/bacula/bacula.sql
}
}
# Client (File Services) to backup
Client {
Name = bmm-s1-fd
Address = bmm-s1
FDPort = 9102
Catalog = MyCatalog
Password = "" # password for FileDaemon
File Retention = 30 days # 30 days
Job Retention = 6 months # six months
AutoPrune = yes # Prune expired Jobs/Files
}
Storage {
Name = LTO-3 # Do not use "localhost" here
Address = bmm-s1.bmmad.internal # N.B. Use a fully qualified name here
SDPort = 9103
Password = ""
Device = LTO-3
Media Type = LTO-3
}
# Definition of LTO-3 tape storage device
Storage {
Name = superloader # Do not use "localhost" here
Address = bmm-s1 # N.B. Use a fully qualified name here
SDPort = 9103
Password = "" # password for Storage daemon
Device = LTO-3 # must be same as Device in Storage daemon
Media Type = LTO-3 # must be same as MediaType in Storage
daemon
}
# Definition of DDS tape storage device
#Storage {
# Name = DDS-4
# Do not use "localhost" here
# Address = bmm-s1 # N.B. Use a fully qualified name here
# SDPort = 9103
# Password = "" # password for Storage daemon
# Device = DDS-4 # must be same as Device in Storage
daemon
# Media Type = DDS-4 # must be same as MediaType in
Storage daemon
#}
# Definition of 8mm tape storage device
#Storage {
# Name = "8mmDrive"
# Do not use "localhost" here
# Address = bmm-s1 # N.B. Use a fully qualified name here
# SDPort = 9103
# Password = ""
# Device = "Exabyte 8mm"
# MediaType = "8mm"
#}
# Generic catalog service
Catalog {
Name = MyCatalog
dbname = bacula; password = "@db_pswd@"
}
# Reasonable message delivery -- send most everything to email address
# and to the console
Messages {
Name = Standard
#
# NOTE! If you send to two email or more email addresses, you will need
# to replace the %r in the from field (-f part) with a single valid
# email address in both the mailcommand and the operatorcommand.
#
mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) %r\"
-s \"Bacula: %t %e of %c %l\" %r"
operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\)
%r\" -s \"Bacula: Intervention needed for %j\" %r"
mail = [EMAIL PROTECTED] = all, !skipped
operator = [EMAIL PROTECTED] = mount
console = all, !skipped, !saved
#
# WARNING! the following will create a file that you must cycle from
# time to time as it will grow indefinitely. However, it will
# also keep all your messages if they scroll off the console.
#
append = "/var/lib/bacula/log" = all, !skipped
}
#
# Message delivery for daemon messages (no job).
Messages {
Name = Daemon
mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) %r\"
-s \"Bacula daemon message\" %r"
mail = [EMAIL PROTECTED] = all, !skipped
console = all, !skipped, !saved
append = "/var/lib/bacula/log" = all, !skipped
}
# Default pool definition
Pool {
Name = Default
Pool Type = Backup
Recycle = yes # Bacula can automatically recycle
Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 365 days # one year
Accept Any Volume = yes # write on any volume in the pool
}
#
# Restricted console used by tray-monitor to get the status of the director
#
Console {
Name = bmm-s1-mon
Password = ""
CommandACL = status, .status
}
###################### fileserver Client #####################
Job {
Name = "lasbmms1w03"
Type = Backup
Client = lasbmms1w03-fd
FileSet = "fileserver"
Schedule = "WeeklyCycle"
Storage = LTO-3
Messages = Standard
Pool = Default
Write Bootstrap = "/var/lib/bacula/lasbmms1w03.bsr"
}
# Client (File Services) to backup
Client {
Name = lasbmms1w03-fd
Address = lasbmms1w03.bmmad.internal
FDPort = 9102
Catalog = MyCatalog
Password = "" # password for
File Retention = 30d # 30 days
Job Retention = 180d # six months
AutoPrune = yes # Prune expired Jobs/Files
}
# List of files to be backed up
FileSet {
Name = "fileserver"
Include {
File = d:/home/departments/sales
Options { compression=GZIP
signature = MD5 }
}
}
# Standard Restore template, to be changed by Console program
Job {
Name = "fileserverrestore"
Type = Restore
Client=lasbmms1w03-fd
FileSet="fileserver"
Storage = superloader
Pool = Default
Messages = Standard
Where = /tmp/bacula-restores
}
###################### Test Client #####################
#Job {
# Name = "bmm-dsalour"
# Type = Backup
# Client = bmm-dsalour-fd
# FileSet = "test1"
# Schedule = "WeeklyCycle"
# Storage = File
# Messages = Standard
# Pool = Default
# Write Bootstrap = "/var/lib/bacula/bmm-dsalour.bsr"
#}
## Client (File Services) to backup
#Client {
# Name = bmm-dsalour-fd
# Address = 10.0.3.26
# FDPort = 9102
# Catalog = MyCatalog
# Password = "" # password for
# File Retention = 30d # 30 days
# Job Retention = 180d # six months
# AutoPrune = yes # Prune expired Jobs/Files
#}
## List of files to be backed up
#FileSet {
# Name = "test1"
# Include {
# File = c:\misc
# Options { compression=GZIP
# signature = MD5 }
# }
#}
Erich Prinz wrote:
> I just had to ask.
>
> If it were me, I'd check:
>
> telnet to the box and attempt a connect to port 9103 to make sure
> there's no firewall block.
>
> If that's kick'n in gear, then I'd run the director with verbose
> logging turned on - it will usually cough up good info to troubleshoot
> the problem.
>
> HTH
>
> Erich
>
> On Mar 15, 2007, at 11:56 PM, Michael Toscano wrote:
>
>> Sure did. I restarted them all.
>>
>> Thanks for the reply!
>>
>> Mike
>>
>>
>> On Thu, 15 Mar 2007 20:49:53 -0500, "Erich Prinz" <[EMAIL PROTECTED]>
>> said:
>>>
>>> Simple question...
>>>
>>> Did you restart the SD daemon after modifying your SD file to use the
>>> LTO device instead of the HDD?
>>>
>>> Erich
>>>
>>>
>>>
>>> On Mar 15, 2007, at 6:22 PM, Mike Toscano wrote:
>>>
>>>> OS: Ubuntu Linux 6.06
>>>> Bacula version: 1.36.3
>>>> Tape changer: Quantum Superloader 3, LTO Ultrium 3
>>>> Changer passes btape autochanger test.
>>>>
>>>> status storage gives me an error:
>>>> Automatically selected Storage: LTO-3
>>>> Connecting to Storage daemon LTO-3 at lasbmms1w03.bmmad.internal:9103
>>>> Failed to connect to Storage daemon LTO-3.
>>>>
>>>> All the daemons are running. I can ping the client with no problem. I
>>>> was able to run backups with no problems when I was backing up to file
>>>> -- hard drive. This is what I get since changing the config files
>>>> toback up to my tape changer.
>>>>
>>>> I have tried google and the list archives and the only other issue I
>>>> have seen similar to this is where people set localhost in the address
>>>> field. I have FQDNs wherever I need to specify a host so I think
>>>> I'm OK
>>>> there.
>>>>
>>>> I'm quite sure this is a configuration issue. Can anyone tell me
>>>> what I
>>>> have wrong or at least push me in the right direction?
>>>>
>>>> My config files follow this message.
>>>>
>>>> Thanks in advance. Any help at all would be tremendously appreciated.
>>>>
>>>> Mike
>>>>
>>>>
>>>> ***********bacula-dir.conf***********
>>>> [EMAIL PROTECTED]:/etc/bacula# cat bacula-dir.conf
>>>> #
>>>> # Default Bacula Director Configuration file
>>>> #
>>>> # The only thing that MUST be changed is to add one or more
>>>> # file or directory names in the Include directive of the
>>>> # FileSet resource.
>>>> #
>>>> # For Bacula release 1.36.3 (22 April 2005) -- debian testing/
>>>> unstable
>>>> #
>>>> # You might also want to change the default email address
>>>> # from root to your address. See the "mail" and "operator"
>>>> # directives in the Messages resource.
>>>> #
>>>>
>>>> Director { # define myself
>>>> Name = bmm-s1-dir
>>>> DIRport = 9101 # where we listen for UA connections
>>>> QueryFile = "/etc/bacula/scripts/query.sql"
>>>> WorkingDirectory = "/var/lib/bacula"
>>>> PidDirectory = "/var/run/bacula"
>>>> Maximum Concurrent Jobs = 1
>>>> Password = "" # Console password
>>>> Messages = Daemon
>>>> }
>>>>
>>>> JobDefs {
>>>> Name = "DefaultJob"
>>>> Type = Backup
>>>> Level = Full
>>>> Client = lasbmms1w03-fd
>>>> FileSet = "Full Set"
>>>> Schedule = "WeeklyCycle"
>>>> Storage = LTO-3
>>>> Messages = Standard
>>>> Pool = Default
>>>> Priority = 10
>>>> }
>>>>
>>>>
>>>> #
>>>> # Define the main nightly save backup job
>>>> # By default, this job will back up to disk in /tmp
>>>> Job {
>>>> Name = "lasbmms1w03-fd"
>>>> JobDefs = "DefaultJob"
>>>> Write Bootstrap = "/var/lib/bacula/lasbmms1w03-fd.bsr"
>>>> }
>>>>
>>>>
>>>> Job {
>>>> Name = "BackupCatalog"
>>>> JobDefs = "DefaultJob"
>>>> Level = Full
>>>> FileSet="Catalog"
>>>> Schedule = "WeeklyCycleAfterBackup"
>>>> # This creates an ASCII copy of the catalog
>>>> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup -u<user>
>>>> -p<password>"
>>>> # This deletes the copy of the catalog
>>>> RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup"
>>>> Write Bootstrap = "/var/lib/bacula/BackupCatalog.bsr"
>>>> Priority = 11 # run after main backup
>>>> }
>>>>
>>>> # Standard Restore template, to be changed by Console program
>>>> Job {
>>>> Name = "RestoreFiles"
>>>> Type = Restore
>>>> Client=lasbmms1w03-fd
>>>> FileSet="Full Set"
>>>> Storage = LTO-3
>>>> Pool = Default
>>>> Messages = Standard
>>>> Where = /tmp/bacula-restores
>>>> }
>>>>
>>>> #
>>>> # Put your list of files here, preceded by 'File =', one per line
>>>> # or include an external list with:
>>>> #
>>>> # File = <file-name
>>>> #
>>>> # Note: / backs up everything on the root partition.
>>>> # if you have other partitons such as /usr or /home
>>>> # you will probably want to add them too.
>>>> #
>>>> # By default this is defined to point to the Bacula build
>>>> # directory to give a reasonable FileSet to backup to
>>>> # disk storage during initial testing.
>>>> #
>>>> # File = /build/buildd/bacula-1.36.3
>>>> # }
>>>>
>>>> #
>>>> # If you backup the root directory, the following two excluded
>>>> # files can be useful
>>>> #
>>>> # Exclude {
>>>> # File = /proc
>>>> # File = /tmp
>>>> # File = /.journal
>>>> # File = /.fsck
>>>> # }
>>>> #}
>>>>
>>>> #
>>>> # When to do the backups, full backup on first sunday of the month,
>>>> # differential (i.e. incremental since full) every other sunday,
>>>> # and incremental backups other days
>>>> #Schedule {
>>>> # Name = "WeeklyCycle"
>>>> # Run = Level=Full Pool=SundayPool Monday at 0:10am
>>>> # Run = Level=Full Pool=MondayPool Tuesday at 0:10am
>>>> # Run = Level=Full Pool=TuesdayPool Wednesday at 0:10am
>>>> # Run = Level=Full Pool=WednesdayPool Wednesday at 0:10am
>>>> # Run = Level=Full Pool=ThursdayPool Friday at 0:10am
>>>> # Run = Level=Full Pool=FridayPool Saturday at 0:10am
>>>> # Run = Level=Full Pool=SaturdayPool Sunday at 0:10am
>>>> #}
>>>>
>>>> Schedule {
>>>> Name = "WeeklyCycle"
>>>> Run = Full 1st sun at 1:05
>>>> Run = Differential 2nd-5th sun at 1:05
>>>> Run = Incremental mon-sat at 1:05
>>>> }
>>>>
>>>>
>>>> # This schedule does the catalog. It starts after the WeeklyCycle
>>>> Schedule {
>>>> Name = "WeeklyCycleAfterBackup"
>>>> Run = Full sun-sat at 1:10
>>>> }
>>>>
>>>> # This is the backup of the catalog
>>>> FileSet {
>>>> Name = "Catalog"
>>>> Include {
>>>> Options {
>>>> signature = MD5
>>>> }
>>>> File = /var/lib/bacula/bacula.sql
>>>> }
>>>> }
>>>>
>>>> # Client (File Services) to backup
>>>> Client {
>>>> Name = lasbmms1w03-fd
>>>> Address = lasbmms1w03.bmmad.internal
>>>> FDPort = 9102
>>>> Catalog = MyCatalog
>>>> Password = "" # password for FileDaemon
>>>> File Retention = 30 days # 30 days
>>>> Job Retention = 6 months # six months
>>>> AutoPrune = yes # Prune expired Jobs/Files
>>>> }
>>>>
>>>> # List of files to be backed up
>>>> FileSet {
>>>> Name = "Full Set"
>>>> Include {
>>>> File = c:\misc\scripts
>>>> Options { compression=GZIP
>>>> signature = MD5 }
>>>> }
>>>> }
>>>>
>>>> Storage {
>>>> Name = LTO-3 # Do not use "localhost" here
>>>> Address = lasbmms1w03.bmmad.internal # N.B. Use a fully qualified
>>>> name here
>>>> SDPort = 9103
>>>> Password = ""
>>>> Device = LTO-3
>>>> Media Type = LTO-3
>>>> }
>>>>
>>>>
>>>> # Definition of LTO-3 tape storage device
>>>> #Storage {
>>>> # Name = superloader # Do not use "localhost" here
>>>> # Address = bmm-s1 # N.B. Use a fully qualified
>>>> name here
>>>> # SDPort = 9103
>>>> # Password = "" # password for Storage daemon
>>>> # Device = LTO-3 # must be same as Device in Storage
>>>> daemon
>>>> # Media Type = LTO-3 # must be same as MediaType in
>>>> Storage daemon
>>>> #}
>>>>
>>>> # Definition of DDS tape storage device
>>>> #Storage {
>>>> # Name = DDS-4
>>>> # Do not use "localhost" here
>>>> # Address = bmm-s1 # N.B. Use a fully qualified
>>>> name here
>>>> # SDPort = 9103
>>>> # Password = "" # password for Storage daemon
>>>> # Device = DDS-4 # must be same as Device in Storage
>>>> daemon
>>>> # Media Type = DDS-4 # must be same as MediaType in
>>>> Storage daemon
>>>> #}
>>>>
>>>> # Generic catalog service
>>>> Catalog {
>>>> Name = MyCatalog
>>>> dbname = bacula; password = ""
>>>> }
>>>>
>>>> # Reasonable message delivery -- send most everything to email address
>>>> # and to the console
>>>> Messages {
>>>> Name = Standard
>>>> #
>>>> # NOTE! If you send to two email or more email addresses, you will
>>>> need
>>>> # to replace the %r in the from field (-f part) with a single valid
>>>> # email address in both the mailcommand and the operatorcommand.
>>>> #
>>>> mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\)
>>>> %r\"
>>>> -s \"Bacula: %t %e of %c %l\" %r"
>>>> operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\
>>>> (Bacula\)
>>>> %r\" -s \"Bacula: Intervention needed for %j\" %r"
>>>> mail = [EMAIL PROTECTED] = all, !skipped
>>>> operator = [EMAIL PROTECTED] = mount
>>>> console = all, !skipped, !saved
>>>> #
>>>> # WARNING! the following will create a file that you must cycle from
>>>> # time to time as it will grow indefinitely. However, it will
>>>> # also keep all your messages if they scroll off the console.
>>>> #
>>>> append = "/var/lib/bacula/log" = all, !skipped
>>>> }
>>>>
>>>>
>>>> #
>>>> # Message delivery for daemon messages (no job).
>>>> Messages {
>>>> Name = Daemon
>>>> mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\)
>>>> %r\"
>>>> -s \"Bacula daemon message\" %r"
>>>> mail = [EMAIL PROTECTED] = all, !skipped
>>>> console = all, !skipped, !saved
>>>> append = "/var/lib/bacula/log" = all, !skipped
>>>> }
>>>>
>>>>
>>>>
>>>>
>>>> # Default pool definition
>>>> Pool {
>>>> Name = Default
>>>> Pool Type = Backup
>>>> Recycle = yes # Bacula can automatically
>>>> recycle
>>>> Volumes
>>>> AutoPrune = yes # Prune expired volumes
>>>> Volume Retention = 365 days # one year
>>>> Accept Any Volume = yes # write on any volume in the
>>>> pool
>>>> }
>>>>
>>>> #
>>>> # Restricted console used by tray-monitor to get the status of the
>>>> director
>>>> #
>>>> #Console {
>>>> # Name = bmm-s1-mon
>>>> # Password = ""
>>>> # CommandACL = status, .status
>>>> #}
>>>> ###################### fileserver Client #####################
>>>> #Job {
>>>> # Name = "lasbmms1w03"
>>>> # Type = Backup
>>>> # Client = lasbmms1w03-fd
>>>> # FileSet = "fileserver"
>>>> # Schedule = "WeeklyCycle"
>>>> # Storage = File
>>>> # Messages = Standard
>>>> # Pool = Default
>>>> # Write Bootstrap = "/var/lib/bacula/lasbmms1w03.bsr"
>>>> #}
>>>> # Client (File Services) to backup
>>>> #Client {
>>>> # Name = lasbmms1w03-fd
>>>> # Address = lasbmms1w03.bmmad.internal
>>>> # FDPort = 9102
>>>> # Catalog = MyCatalog
>>>> # Password = "" # password for
>>>> # File Retention = 30d # 30 days
>>>> # Job Retention = 180d # six months
>>>> # AutoPrune = yes # Prune expired Jobs/Files
>>>> #}
>>>>
>>>> # List of files to be backed up
>>>> #FileSet {
>>>> # Name = "fileserver"
>>>> # Include {
>>>> # File = d:/home/departments/sales
>>>> # Options { compression=GZIP
>>>> # signature = MD5 }
>>>> # }
>>>> #}
>>>>
>>>> # Standard Restore template, to be changed by Console program
>>>> #Job {
>>>> # Name = "fileserverrestore"
>>>> # Type = Restore
>>>> # Client=lasbmms1w03-fd
>>>> # FileSet="fileserver"
>>>> # Storage = superloader
>>>> # Pool = Default
>>>> # Messages = Standard
>>>> # Where = /tmp/bacula-restores
>>>> #}
>>>>
>>>> ###################### Test Client #####################
>>>> #Job {
>>>> # Name = "bmm-dsalour"
>>>> # Type = Backup
>>>> # Client = bmm-dsalour-fd
>>>> # FileSet = "test1"
>>>> # Schedule = "WeeklyCycle"
>>>> # Storage = File
>>>> # Messages = Standard
>>>> # Pool = Default
>>>> # Write Bootstrap = "/var/lib/bacula/bmm-dsalour.bsr"
>>>> #}
>>>> ## Client (File Services) to backup
>>>> #Client {
>>>> # Name = bmm-dsalour-fd
>>>> # Address = 10.0.3.26
>>>> # FDPort = 9102
>>>> # Catalog = MyCatalog
>>>> # Password = "" # password for
>>>> # File Retention = 30d # 30 days
>>>> # Job Retention = 180d # six months
>>>> # AutoPrune = yes # Prune expired Jobs/Files
>>>> #}
>>>>
>>>> ## List of files to be backed up
>>>> #FileSet {
>>>> # Name = "test1"
>>>> # Include {
>>>> # File = c:\misc
>>>> # Options { compression=GZIP
>>>> # signature = MD5 }
>>>> # }
>>>> #}
>>>>
>>>> ******************bacula-sd.conf*******************
>>>>
>>>> [EMAIL PROTECTED]:/etc/bacula# cat bacula-sd.conf
>>>> #
>>>> # Default Bacula Storage Daemon Configuration file
>>>> #
>>>> # For Bacula release 1.36.3 (22 April 2005) -- debian testing/
>>>> unstable
>>>> #
>>>> # You may need to change the name of your tape drive
>>>> # on the "Archive Device" directive in the Device
>>>> # resource. If you change the Name and/or the
>>>> # "Media Type" in the Device resource, please ensure
>>>> # that dird.conf has corresponding changes.
>>>> #
>>>>
>>>> Storage { # definition of myself
>>>> Name = bmm-s1-sd
>>>> SDPort = 9103 # Director's port
>>>> WorkingDirectory = "/var/lib/bacula"
>>>> Pid Directory = "/var/run/bacula"
>>>> Maximum Concurrent Jobs = 20
>>>> }
>>>>
>>>> #
>>>> # List Directors who are permitted to contact Storage daemon
>>>> #
>>>> Director {
>>>> Name = bmm-s1-dir
>>>> Password = ""
>>>> }
>>>>
>>>> #
>>>> # Restricted Director, used by tray-monitor to get the
>>>> # status of the storage daemon
>>>> #
>>>> Director {
>>>> Name = bmm-s1-mon
>>>> Password = ""
>>>> Monitor = yes
>>>> }
>>>>
>>>> #
>>>> # Devices supported by this Storage daemon
>>>> # To connect, the Director's bacula-dir.conf must have the
>>>> # same Name and MediaType.
>>>> #
>>>>
>>>> #Device {
>>>> # Name = FileStorage
>>>> # Media Type = File
>>>> # Archive Device = /tmp
>>>> # LabelMedia = yes; # lets Bacula label
>>>> unlabeled media
>>>> # Random Access = Yes;
>>>> # AutomaticMount = yes; # when device opened, read it
>>>> # RemovableMedia = no;
>>>> # AlwaysOpen = no;
>>>> #}
>>>>
>>>> #
>>>> # A Linux or Solaris tape drive
>>>> #
>>>> Device {
>>>> Name = LTO-3 #
>>>> Media Type = LTO-3
>>>> Archive Device = /dev/nst0
>>>> AutomaticMount = yes; # when device opened, read it
>>>> AlwaysOpen = yes;
>>>> RemovableMedia = yes;
>>>> RandomAccess = no;
>>>> Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
>>>> Changer Device = /dev/sg2
>>>> AutoChanger = yes
>>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>> }
>>>>
>>>> #
>>>> # A FreeBSD tape drive
>>>> #
>>>> #Device {
>>>> # Name = DDS-4
>>>> # Description = "DDS-4 for FreeBSD"
>>>> # Media Type = DDS-4
>>>> # Archive Device = /dev/nsa1
>>>> # AutomaticMount = yes; # when device opened, read it
>>>> # AlwaysOpen = yes
>>>> # Offline On Unmount = no
>>>> # Hardware End of Medium = no
>>>> # BSF at EOM = yes
>>>> # Backward Space Record = no
>>>> # Fast Forward Space File = no
>>>> # TWO EOF = yes
>>>> #}
>>>>
>>>> #
>>>> # A OnStream tape drive.
>>>> # You need the kernel osst driver 0.9.14 or later, and
>>>> # do "mt -f /dev/nosst0 defblksize 32768" once as root.
>>>> #
>>>> #Device {
>>>> # Name = OnStream
>>>> # Description = "OnStream drive on Linux"
>>>> # Media Type = OnStream
>>>> # Archive Device = /dev/nrst0
>>>> # AutomaticMount = yes; # when device opened, read it
>>>> # AlwaysOpen = yes
>>>> # Offline On Unmount = no
>>>> ## The min/max blocksizes of 32768 are *required*
>>>> # Minimum Block Size = 32768
>>>> # Maximum Block Size = 32768
>>>> #}
>>>>
>>>> #
>>>> # A very old Exabyte with no end of media detection
>>>> #
>>>> #Device {
>>>> # Name = "Exabyte 8mm"
>>>> # Media Type = "8mm"
>>>> # Archive Device = /dev/nrst0
>>>> # Hardware end of medium = No;
>>>> # AutomaticMount = yes; # when device opened, read it
>>>> # AlwaysOpen = Yes;
>>>> # RemovableMedia = yes;
>>>> # RandomAccess = no;
>>>> #}
>>>>
>>>> #
>>>> # Send all messages to the Director,
>>>> # mount messages also are sent to the email address
>>>> #
>>>> Messages {
>>>> Name = Standard
>>>> director = bmm-s1-dir = all
>>>> }
>>>>
>>>> ***************bacula-fd.conf*****************
>>>>
>>>> [EMAIL PROTECTED]:/etc/bacula# cat bacula-fd.conf
>>>> #
>>>> # Default Bacula File Daemon Configuration file
>>>> #
>>>> # For Bacula release 1.36.3 (22 April 2005) -- debian testing/
>>>> unstable
>>>> #
>>>> # There is not much to change here except perhaps the
>>>> # File daemon Name to
>>>> #
>>>>
>>>> #
>>>> # List Directors who are permitted to contact this File daemon
>>>> #
>>>> Director {
>>>> Name = bmm-s1-dir
>>>> Password = ""
>>>> }
>>>>
>>>> #
>>>> # Restricted Director, used by tray-monitor to get the
>>>> # status of the file daemon
>>>> #
>>>> Director {
>>>> Name = bmm-s1-mon
>>>> Password = ""
>>>> Monitor = yes
>>>> }
>>>>
>>>> #
>>>> # "Global" File daemon configuration specifications
>>>> #
>>>> FileDaemon { # this is me
>>>> Name = bmm-s1-fd
>>>> FDport = 9102 # where we listen for the director
>>>> WorkingDirectory = /var/lib/bacula
>>>> Pid Directory = /var/run/bacula
>>>> Maximum Concurrent Jobs = 20
>>>> }
>>>>
>>>> # Send all messages except skipped files back to Director
>>>> Messages {
>>>> Name = Standard
>>>> director = bmm-s1-dir = all, !skipped
>>>> }
>>>> [EMAIL PROTECTED]:/etc/bacula#
>>>>
>>>>
>>>> ----------------------------------------------------------------------
>>>> ---
>>>> Take Surveys. Earn Cash. Influence the Future of IT
>>>> Join SourceForge.net's Techsay panel and you'll get the chance to
>>>> share your
>>>> opinions on IT & business topics through brief surveys-and earn cash
>>>> http://www.techsay.com/default.php?
>>>> page=join.php&p=sourceforge&CID=DEVDEV
>>>> _______________________________________________
>>>> Bacula-users mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>
>>>
>> ____________________
>> Mike Toscano
>> Director of Information Technology
>> BMMtestlabs
>> 8685 S. Eastern Ave.
>> Las Vegas, NV 89123
>> Tel: 702-407-2420
>> Fax: 702-407-2421
>> www.bmm.com
>>
>> ----------------------------------------------------------------------------------------------------------
>>
>>
>> This e-mail message is a confidential communication from BMM North
>> America, Inc. DBA BMMtestlabs and is
>> intended only for the named recipient(s) above and may contain
>> information that is a trade secret,
>> proprietary or privileged. If you have received this message in
>> error, or are not the named or intended
>> recipient(s), please immediately notify the sender at 702-407-2420
>> and delete this e-mail message and
>> any attachments from your workstation or network mail system.
>>
>>
>> -------------------------------------------------------------------------
>>
>> Take Surveys. Earn Cash. Influence the Future of IT
>> Join SourceForge.net's Techsay panel and you'll get the chance to
>> share your
>> opinions on IT & business topics through brief surveys-and earn cash
>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>
>> _______________________________________________
>> Bacula-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
