Hi,
Any suggest I could start looking at ?
Regards, Adam Cécile.
Adam Cécile a écrit :
> Hello,
>
> I have set up a bacula installation with a Dell 132T autochanger (/dev/sg2).
> It has two LOT3 drives, /dev/nst0 and /dev/nst1.
> Both drives works fine with the mtx-changer script. Currently backup are
> done but only used drive 0. I would like to run jobs on both drive 0 and
> 1, however when I start two jobs at the same, the first one starts and
> the second one starts two but wait for drive 0 to become free before
> writing.
> Could you help me to get the second jobs, loads a tape in drive 1 and
> starts writing on drive 1, while drive 0 is used ?
>
> Thanks in advance.
>
> PS: See some parts of my config below!
>
>
>
> Here is my storage daemon conf :
>
> Storage { # definition of myself
> Name = srv-mpp-lrs-sd
> SDPort = 9103 # Director's port
> WorkingDirectory = "/var/lib/bacula"
> Pid Directory = "/var/run/bacula"
> Maximum Concurrent Jobs = 2
> SDAddress = 0.0.0.0
> }
> Director {
> Name = srv-mpp-lrs-dir
> Password = "xxx"
> }
> Director {
> Name = srv-mpp-lrs-mon
> Password = "xxx"
> Monitor = yes
> }
> # An autochanger device with two drives
> Autochanger {
> Name = Dell-PV132T
> Device = ULTRIUM-TD3-1
> Device = ULTRIUM-TD3-2
> Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg2
> }
> Device {
> Name = ULTRIUM-TD3-1
> Drive Index = 0
> Media Type = LTO3
> Archive Device = /dev/nst0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> #RandomAccess = no;
> AutoChanger = yes
> # Enable the Alert command only if you have the mtx package loaded
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
> Device {
> Name = ULTRIUM-TD3-2
> Drive Index = 1
> Media Type = LTO3
> Archive Device = /dev/nst1
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> #RandomAccess = no;
> AutoChanger = yes
> # Enable the Alert command only if you have the mtx package loaded
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
> Messages {
> Name = Standard
> director = srv-mpp-lrs-dir = all
> }
>
>
>
> And some usefull parts of director conf :
>
> Director { # define myself
> Name = srv-mpp-lrs-dir
> DIRport = 9101 # where we listen for UA connections
> QueryFile = "/etc/bacula/scripts/query.sql"
> WorkingDirectory = "/var/lib/bacula"
> PidDirectory = "/var/run/bacula"
> Password = "xxx" # Console password
> Messages = Daemon
> DirAddress = 0.0.0.0
> Maximum Concurrent Jobs = 2
> }
> # Templates pour les jobs
> JobDefs {
> Name = "DefaultJob"
> Type = Backup
> Storage = Autochanger
> Messages = Standard
> Client = srv-mpp-lrs-fd
> FileSet = "Full Set"
> Priority = 5
> # Do not wait more than 6days (next weekly)
> Max Start Delay = 6d
> Max Wait Time = 6d
> # Do not wait more than 23h (next daily)
> Incremental Max Wait Time = 23h
> Schedule = "Planning"
> Pool = Weekly, Daily
> }
> # Autochanger Dell PV132T (21x LTO3)
> Storage {
> Name = Autochanger
> Address = srv-mpp-lrs
> SDPort = 9103
> Password = "xxx"
> Device = Dell-PV132T # must be same as Device in Storage
> daemon
> Media Type = LTO3 # must be same as MediaType in
> Storage daemon
> Autochanger = yes # enable for autochanger device
> Maximum Concurrent Jobs = 2
> }
>
>
>
--
Adam CECILE Linbox / Free&ALter Soft
152 rue de Grigy tél: +33 3 87 50 87 95
Technopôle Metz 2000 fax: +33 3 87 75 19 26
57070 METZ - France http://www.linbox.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
