Kern Sibbald a écrit :
> On Tuesday 20 February 2007 10:47, Adam Cécile wrote:
>
>> Hi,
>>
>> Any suggest I could start looking at ?
>>
>
> 1. Run the SD with debug level 100.
>
> 2. Look at doc for PreferMountedVolumes
>
Thanks a lot, it was my mistake ;-)
>
> 3. Although you provided your conf files (very useful), you did not say what
> version of Bacula you are using (important) nor show any of the output where
> the drive is not used.
>
>
>> Regards, Adam Cécile.
>>
>> Adam Cécile a écrit :
>>
>>> Hello,
>>>
>>> I have set up a bacula installation with a Dell 132T autochanger
>>> (/dev/sg2). It has two LOT3 drives, /dev/nst0 and /dev/nst1.
>>> Both drives works fine with the mtx-changer script. Currently backup are
>>> done but only used drive 0. I would like to run jobs on both drive 0 and
>>> 1, however when I start two jobs at the same, the first one starts and
>>> the second one starts two but wait for drive 0 to become free before
>>> writing.
>>> Could you help me to get the second jobs, loads a tape in drive 1 and
>>> starts writing on drive 1, while drive 0 is used ?
>>>
>>> Thanks in advance.
>>>
>>> PS: See some parts of my config below!
>>>
>>>
>>>
>>> Here is my storage daemon conf :
>>>
>>> Storage { # definition of myself
>>> Name = srv-mpp-lrs-sd
>>> SDPort = 9103 # Director's port
>>> WorkingDirectory = "/var/lib/bacula"
>>> Pid Directory = "/var/run/bacula"
>>> Maximum Concurrent Jobs = 2
>>> SDAddress = 0.0.0.0
>>> }
>>> Director {
>>> Name = srv-mpp-lrs-dir
>>> Password = "xxx"
>>> }
>>> Director {
>>> Name = srv-mpp-lrs-mon
>>> Password = "xxx"
>>> Monitor = yes
>>> }
>>> # An autochanger device with two drives
>>> Autochanger {
>>> Name = Dell-PV132T
>>> Device = ULTRIUM-TD3-1
>>> Device = ULTRIUM-TD3-2
>>> Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
>>> Changer Device = /dev/sg2
>>> }
>>> Device {
>>> Name = ULTRIUM-TD3-1
>>> Drive Index = 0
>>> Media Type = LTO3
>>> Archive Device = /dev/nst0
>>> AutomaticMount = yes; # when device opened, read it
>>> AlwaysOpen = yes;
>>> RemovableMedia = yes;
>>> #RandomAccess = no;
>>> AutoChanger = yes
>>> # Enable the Alert command only if you have the mtx package loaded
>>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>> }
>>> Device {
>>> Name = ULTRIUM-TD3-2
>>> Drive Index = 1
>>> Media Type = LTO3
>>> Archive Device = /dev/nst1
>>> AutomaticMount = yes; # when device opened, read it
>>> AlwaysOpen = yes;
>>> RemovableMedia = yes;
>>> #RandomAccess = no;
>>> AutoChanger = yes
>>> # Enable the Alert command only if you have the mtx package loaded
>>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>> }
>>> Messages {
>>> Name = Standard
>>> director = srv-mpp-lrs-dir = all
>>> }
>>>
>>>
>>>
>>> And some usefull parts of director conf :
>>>
>>> Director { # define myself
>>> Name = srv-mpp-lrs-dir
>>> DIRport = 9101 # where we listen for UA connections
>>> QueryFile = "/etc/bacula/scripts/query.sql"
>>> WorkingDirectory = "/var/lib/bacula"
>>> PidDirectory = "/var/run/bacula"
>>> Password = "xxx" # Console password
>>> Messages = Daemon
>>> DirAddress = 0.0.0.0
>>> Maximum Concurrent Jobs = 2
>>> }
>>> # Templates pour les jobs
>>> JobDefs {
>>> Name = "DefaultJob"
>>> Type = Backup
>>> Storage = Autochanger
>>> Messages = Standard
>>> Client = srv-mpp-lrs-fd
>>> FileSet = "Full Set"
>>> Priority = 5
>>> # Do not wait more than 6days (next weekly)
>>> Max Start Delay = 6d
>>> Max Wait Time = 6d
>>> # Do not wait more than 23h (next daily)
>>> Incremental Max Wait Time = 23h
>>> Schedule = "Planning"
>>> Pool = Weekly, Daily
>>> }
>>> # Autochanger Dell PV132T (21x LTO3)
>>> Storage {
>>> Name = Autochanger
>>> Address = srv-mpp-lrs
>>> SDPort = 9103
>>> Password = "xxx"
>>> Device = Dell-PV132T # must be same as Device in Storage
>>> daemon
>>> Media Type = LTO3 # must be same as MediaType in
>>> Storage daemon
>>> Autochanger = yes # enable for autochanger device
>>> Maximum Concurrent Jobs = 2
>>> }
>>>
--
Adam CECILE Linbox / Free&ALter Soft
152 rue de Grigy tél: +33 3 87 50 87 95
Technopôle Metz 2000 fax: +33 3 87 75 19 26
57070 METZ - France http://www.linbox.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
