Could you post your sd and dir configs? I think I know what the problem is.
Dragos Gheorghe wrote:
>
> not really
>
> *add pool=bacula-pool-tape-incremental
> storage=bacula-storage-tape-ibm-ultrium-ct2-id01
> You probably don't want to be using this command since it
> creates database records without labeling the Volumes.
> You probably want to use the "label" command.
>
> Enter number of Volumes to create. 0=>fixed name. Max=1000: 0
> Enter Volume name: B00000
> sql_create.c:396 Volume "B00000" already exists.
> *add pool=bacula-pool-tape-full
> storage=bacula-storage-tape-ibm-ultrium-ct2-id01
> You probably don't want to be using this command since it
> creates database records without labeling the Volumes.
> You probably want to use the "label" command.
>
> Enter number of Volumes to create. 0=>fixed name. Max=1000: 0
> Enter Volume name: B00000
> sql_create.c:396 Volume "B00000" already exists.
>
> in the first mail the volume is present in the tape-incremental pool
> listing, other pools are empty, also below, that pool is listed as
> having 1 volume, which is basically what i have
>
> i dont understand the flow of the storage daemon and if it uses the
> catalog (could this be caused by a catalog corruption?), so i cant
> really narrow this down, might be a bug then again might be me
> what i dont understand is why b*utilities see the bacula label on the
> tape and the SD doesnt, arent all using the same libs?
>
>
> Aaron Knister wrote:
>> Basically it sounds like that tape didn't get assigned to a pool. Try
>> this in bconsole-
>>
>> add pool=/pool name/ storage=bacula-device-tape-ibm-ultrium-ct2-id01
>>
>> then when prompted enter the volume name of the tape which I think is
>> B00000
>>
>> Maybe I'm misunderstanding the problem at hand. I'm still not using
>> bacula version 2.0
>>
>> Dragos Gheorghe wrote:
>>>
>>> *list pool
>>> Automatically selected Catalog: bacula-catalog
>>> Using Catalog "bacula-catalog"
>>> +--------+-------------------------------+---------+---------+----------+------------------------------------------------+
>>>
>>>
>>> | PoolId | Name | NumVols | MaxVols |
>>> PoolType | LabelFormat |
>>> +--------+-------------------------------+---------+---------+----------+------------------------------------------------+
>>>
>>>
>>> | 1 | bacula-pool-file | 0 | 0 |
>>> Backup | ${Client}_${NumVols:p/6/0/r}.volume |
>>> | 2 | bacula-pool-tape | 0 | 0 |
>>> Backup | B${NumVols:p/5/0/r} |
>>> | 3 | bacula-pool-file-full | 0 | 0 |
>>> Backup | ${Client}_${Level:l}_${NumVols:p/6/0/r}.volume |
>>> | 4 | bacula-pool-file-differential | 0 | 0 |
>>> Backup | ${Client}_${Level:l}_${NumVols:p/6/0/r}.volume |
>>> | 5 | bacula-pool-file-incremental | 0 | 0 |
>>> Backup | ${Client}_${Level:l}_${NumVols:p/6/0/r}.volume |
>>> | 6 | bacula-pool-file-catalog | 0 | 0 |
>>> Backup | ${Client}_${Level:l}_${NumVols:p/6/0/r}.volume |
>>> | 7 | bacula-pool-tape-full | 0 | 0 |
>>> Backup | B${NumVols:p/5/0/r} |
>>> | 8 | bacula-pool-tape-differential | 0 | 0 |
>>> Backup | B${NumVols:p/5/0/r} |
>>> | 9 | bacula-pool-tape-incremental | 1 | 0 |
>>> Backup | B${NumVols:p/5/0/r} |
>>> | 10 | bacula-pool-tape-catalog | 0 | 0 |
>>> Backup | B${NumVols:p/5/0/r} |
>>> | 11 | Scratch | 0 | 0 |
>>> Backup | * |
>>> +--------+-------------------------------+---------+---------+----------+------------------------------------------------+
>>>
>>>
>>>
>>>
>>> Aaron Knister wrote:
>>>> What does a list pool show?
>>>>
>>>> Dragos Gheorghe wrote:
>>>>> my setup worked ok both on scheduled jobs and bconsole run
>>>>> command, until today and for a couple of months now (on bacula 2
>>>>> from 2 weeks)
>>>>> im working on Version: 2.0.1 (12 January 2007) i686-pc-linux-gnu
>>>>> redhat
>>>>> compiled from source on centos 4
>>>>>
>>>>> i think the problem started from canceling a label command with
>>>>> "." (single dot) after trying to use that to add the volume to
>>>>> another pool as well
>>>>> *label
>>>>> ...
>>>>> 22: bacula-storage-tape-ibm-ultrium-ct2-id01
>>>>> Select Storage resource (1-22): 22
>>>>> Enter new Volume name: B00000
>>>>> Media record for new Volume "B00000" already exists.
>>>>> Enter new Volume name: Volume name must be at least one character
>>>>> long.
>>>>> Enter new Volume name:
>>>>> Volume name must be at least one character long.
>>>>> Enter new Volume name: .
>>>>> *mess
>>>>> You have no messages.
>>>>> im not sure this is the cause
>>>>>
>>>>>
>>>>> mount command
>>>>> ....
>>>>> 22: bacula-storage-tape-ibm-ultrium-ct2-id01
>>>>> Select Storage resource (1-22): 22
>>>>> 3905 Device "bacula-device-tape-ibm-ultrium-ct2-id01" (/dev/nst0)
>>>>> open but no Bacula volume is mounted.
>>>>> If this is not a blank tape, try unmounting and remounting the
>>>>> Volume.
>>>>>
>>>>>
>>>>>
>>>>> output from btape readlabel and status
>>>>> btape: btape.c:419 Volume label read correctly.
>>>>>
>>>>> Volume Label:
>>>>> Id : Bacula 1.0 immortal
>>>>> VerNo : 11
>>>>> VolName : B00000
>>>>> PrevVolName :
>>>>> VolFile : 0
>>>>> LabelType : VOL_LABEL
>>>>> LabelSize : 197
>>>>> PoolName : bacula-pool-tape-incremental
>>>>> MediaType : bacula-mediatype-tape-lto2
>>>>> PoolType : Backup
>>>>> HostName : soter
>>>>> Date label written: 01-Feb-2007 10:00
>>>>> *status
>>>>> Bacula status: file=0 block=0
>>>>> Device status: BOT ONLINE IM_REP_EN file=0 block=0
>>>>> btape: btape.c:1799 Device status: 645. ERR=
>>>>>
>>>>>
>>>>>
>>>>> bscan also shows no errors
>>>>> bscan: butil.c:283 Using device: "/dev/nst0" for reading.
>>>>> 06-Feb 07:23 bscan: Ready to read from volume "B00000" on device
>>>>> "bacula-device-tape-ibm-ultrium-ct2-id01" (/dev/nst0).
>>>>> bscan: bscan.c:288 Using Database: bacula, User: bacula
>>>>> bscan: bscan.c:426 Pool record for bacula-pool-tape-incremental
>>>>> found in DB.
>>>>> bscan: bscan.c:440 Pool type "Backup" is OK.
>>>>> bscan: bscan.c:450 Media record for B00000 found in DB.
>>>>> bscan: bscan.c:468 Media type "bacula-mediatype-tape-lto2" is OK.
>>>>> bscan: bscan.c:477 VOL_LABEL: OK for Volume: B00000
>>>>> ...and lots of job tests that look ok
>>>>> also i tested the tape drive and tape with btape ok
>>>>>
>>>>>
>>>>>
>>>>> llist media
>>>>> .....
>>>>> Pool: bacula-pool-tape-incremental
>>>>> MediaId: 1
>>>>> VolumeName: B00000
>>>>> Slot: 0
>>>>> PoolId: 9
>>>>> MediaType: bacula-mediatype-tape-lto2
>>>>> FirstWritten: 2007-02-01 10:00:06
>>>>> LastWritten: 2007-02-06 04:52:00
>>>>> LabelDate: 2007-02-01 10:00:06
>>>>> VolJobs: 43
>>>>> VolFiles: 169
>>>>> VolBlocks: 2,792,562
>>>>> VolMounts: 1
>>>>> VolBytes: 180,153,824,256
>>>>> VolErrors: 0
>>>>> VolWrites: 2,792,563
>>>>> VolCapacityBytes: 0
>>>>> VolStatus: Append
>>>>> Enabled: 1
>>>>> Recycle: 1
>>>>> VolRetention: 2,764,800
>>>>> VolUseDuration: 0
>>>>> MaxVolJobs: 0
>>>>> MaxVolFiles: 0
>>>>> MaxVolBytes: 0
>>>>> InChanger: 0
>>>>> EndFile: 168
>>>>> EndBlock: 7,002
>>>>> VolParts: 0
>>>>> LabelType: 0
>>>>> StorageId: 22
>>>>> DeviceId: 0
>>>>> LocationId: 0
>>>>> RecycleCount: 0
>>>>> InitialWrite: 0000-00-00 00:00:00
>>>>> ScratchPoolId: 0
>>>>> RecyclePoolId: 0
>>>>> Comment: NULL
>>>>>
>>>>>
>>>>>
>>>>> list volume
>>>>> ....
>>>>> Pool: bacula-pool-tape-incremental
>>>>> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+----------------------------+---------------------+
>>>>>
>>>>>
>>>>> | MediaId | VolumeName | VolStatus | Enabled | VolBytes |
>>>>> VolFiles | VolRetention | Recycle | Slot | InChanger |
>>>>> MediaType | LastWritten |
>>>>> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+----------------------------+---------------------+
>>>>>
>>>>>
>>>>> | 1 | B00000 | Append | 1 | 180,153,824,256
>>>>> | 169 | 2,764,800 | 1 | 0 | 0 |
>>>>> bacula-mediatype-tape-lto2 | 2007-02-06 04:52:00 |
>>>>> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+----------------------------+---------------------+
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> device is
>>>>> (scsi1:A:6): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
>>>>> Vendor: CERTANCE Model: ULTRIUM 2 Rev: 1748
>>>>> Type: Sequential-Access ANSI SCSI revision: 03
>>>>>
>>>>>
>>>>> any idea what this problem is about and more importantly how to
>>>>> correct it?
>>>>> thank you for your time
>>>>>
>>>>>
>>>>>
>>>>> -------------------------------------------------------------------------
>>>>>
>>>>> Using Tomcat but need to do more? Need to support web services,
>>>>> security?
>>>>> Get stuff done quickly with pre-integrated technology to make your
>>>>> job easier.
>>>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache
>>>>> Geronimo
>>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>>>
>>>>> _______________________________________________
>>>>> Bacula-users mailing list
>>>>> Bacula-users@lists.sourceforge.net
>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
