im not using an autochanger (yet), its a simple lto2 single tape drive
# cat
/usr/local/bacula/storage/etc/devices/bacula-sd-device-tape-ibm-ultrium-ct2-id01.conf
|grep -v ^#|egrep ".+"
Device {
Name = bacula-device-tape-ibm-ultrium-ct2-id01
DeviceType= Tape
MediaType = bacula-mediatype-tape-lto2
Archive Device = "/dev/nst0"
LabelMedia = Yes
MaximumFileSize = 1G
SpoolDirectory = "/usr/local/bacula/storage/var/spool"
MaximumSpoolSize = 12G
MaximumJobSpoolSize = 3G
}
job was not running because it was using the tape-full pool (as opposed
to those scheduled who use the incremental one even if their level is
upgraded to full) and that pool has no volumes inside it. My wrong was
using the label command to add a volume to it instead of using add to
add the already existing volume in, but i canceled the label command
when i was requested for the volume name (as initial paste shows)
also bacula wanted to auto label another volume to the tape-full pool
but it used the B00000 name, which was already added to the
tape-incremental pool, paste below..
(i canceled that job by hand)
06-Feb 06:12 soter-dir: Start Backup JobId 60,
Job=ken-tapeid01-clientunix-job.2007-02-06_06.11.59
06-Feb 06:12 soter-dir: ken-tapeid01-clientunix-job.2007-02-06_06.11.59 Error:
sql_create.c:396 Volume "B00000" already exists.
06-Feb 06:12 soter-dir: ken-tapeid01-clientunix-job.2007-02-06_06.11.59 Error:
sql_create.c:396 Volume "B00000" already exists.
06-Feb 06:13 soter-dir: ken-tapeid01-clientunix-job.2007-02-06_06.11.59 Error:
sql_create.c:396 Volume "B00000" already exists.
06-Feb 06:13 soter-dir: ken-tapeid01-clientunix-job.2007-02-06_06.11.59 Error:
sql_create.c:396 Volume "B00000" already exists.
06-Feb 06:13 soter-sd: Job ken-tapeid01-clientunix-job.2007-02-06_06.11.59
waiting. Cannot find any appendable volumes.
Please use the "label" command to create a new Volume for:
Storage: "bacula-device-tape-ibm-ultrium-ct2-id01" (/dev/nst0)
Media type: bacula-mediatype-tape-lto2
Pool: bacula-pool-tape-full
06-Feb 06:27 soter-sd: Job marked to be canceled.
06-Feb 06:27 soter-sd: Job ken-tapeid01-clientunix-job.2007-02-06_06.11.59
canceled while waiting for mount on Storage Device
""bacula-device-tape-ibm-ultrium-ct2-id01" (/dev/nst0)".
06-Feb 06:27 soter-dir: Bacula 2.0.1 (12Jan07): 06-Feb-2007 06:27:00
JobId: 60
Job: ken-tapeid01-clientunix-job.2007-02-06_06.11.59
Backup Level: Full
Client: "ken-fd" 2.0.1 (12Jan07)
i386-unknown-freebsd5.4,freebsd,5.4-STABLE
FileSet: "bacula-fileset-client-unix" 2007-02-01 10:00:00
Pool: "bacula-pool-tape-full" (From Job resource)
Storage: "bacula-storage-tape-ibm-ultrium-ct2-id01" (From Job
resource)
Scheduled time: 06-Feb-2007 06:11:39
Start time: 06-Feb-2007 06:12:04
End time: 06-Feb-2007 06:27:00
Elapsed time: 14 mins 56 secs
Priority: 9
FD Files Written: 0
SD Files Written: 0
FD Bytes Written: 0 (0 B)
SD Bytes Written: 0 (0 B)
Rate: 0.0 KB/s
Software Compression: None
VSS: no
Encryption: no
Volume name(s):
Volume Session Id: 55
Volume Session Time: 1170352099
Last Volume Bytes: 0 (0 B)
Non-fatal FD errors: 0
SD Errors: 0
FD termination status: Canceled
SD termination status: Canceled
Termination: Backup Canceled
im also considering replacing the tape and keeping it for recovery only
to prevent bacula from corrupting it
but lets get back on topic, why does status storage not see the bacula
label while btape, bscan and others see it ok? how to correct this?
(btw add is the right command to have a volume in different pools at the
same time no? and i know this somewhat breaks the reasoning behind pools..)
Aaron Knister wrote:
> I'm speculating that your jobs are referencing the tape drive as
> opposed to the autochanger in their specified storage resource. Could
> you post the lines of your SD where your drive and autochanger are
> configured, and could you also post the job line for your job thats
> not running.
>
> Also try this-
> update slots
>
> because if you look at the media status, bacula doesn't think that
> this volume is in the changer. InChanger is 0
>
> -Aaron
>
> Dragos Gheorghe wrote:
>>
>> not really because a du -h is about 2MB so maybe tell me what your
>> hunch is or what specific configuration you want to see?
>>
>> im using a split config, many files targeted at specific parts of the
>> configuration (via the Include directive), also i havent changed
>> _anything_ in the config layout from a week or so (a full and
>> incremental backups worth)
>>
>>
>> Aaron Knister wrote:
>>> Could you post your sd and dir configs? I think I know what the
>>> problem is.
>>>
>>>
>>>
>>> Dragos Gheorghe wrote:
>>>>
>>>> not really
>>>>
>>>> *add pool=bacula-pool-tape-incremental
>>>> storage=bacula-storage-tape-ibm-ultrium-ct2-id01
>>>> You probably don't want to be using this command since it
>>>> creates database records without labeling the Volumes.
>>>> You probably want to use the "label" command.
>>>>
>>>> Enter number of Volumes to create. 0=>fixed name. Max=1000: 0
>>>> Enter Volume name: B00000
>>>> sql_create.c:396 Volume "B00000" already exists.
>>>> *add pool=bacula-pool-tape-full
>>>> storage=bacula-storage-tape-ibm-ultrium-ct2-id01
>>>> You probably don't want to be using this command since it
>>>> creates database records without labeling the Volumes.
>>>> You probably want to use the "label" command.
>>>>
>>>> Enter number of Volumes to create. 0=>fixed name. Max=1000: 0
>>>> Enter Volume name: B00000
>>>> sql_create.c:396 Volume "B00000" already exists.
>>>>
>>>> in the first mail the volume is present in the tape-incremental
>>>> pool listing, other pools are empty, also below, that pool is
>>>> listed as having 1 volume, which is basically what i have
>>>>
>>>> i dont understand the flow of the storage daemon and if it uses the
>>>> catalog (could this be caused by a catalog corruption?), so i cant
>>>> really narrow this down, might be a bug then again might be me
>>>> what i dont understand is why b*utilities see the bacula label on
>>>> the tape and the SD doesnt, arent all using the same libs?
>>>>
>>>>
>>>> Aaron Knister wrote:
>>>>> Basically it sounds like that tape didn't get assigned to a pool.
>>>>> Try this in bconsole-
>>>>>
>>>>> add pool=/pool name/ storage=bacula-device-tape-ibm-ultrium-ct2-id01
>>>>>
>>>>> then when prompted enter the volume name of the tape which I think
>>>>> is B00000
>>>>>
>>>>> Maybe I'm misunderstanding the problem at hand. I'm still not
>>>>> using bacula version 2.0
>>>>>
>>>>> Dragos Gheorghe wrote:
>>>>>>
>>>>>> *list pool
>>>>>> Automatically selected Catalog: bacula-catalog
>>>>>> Using Catalog "bacula-catalog"
>>>>>> +--------+-------------------------------+---------+---------+----------+------------------------------------------------+
>>>>>>
>>>>>>
>>>>>> | PoolId | Name | NumVols | MaxVols |
>>>>>> PoolType | LabelFormat |
>>>>>> +--------+-------------------------------+---------+---------+----------+------------------------------------------------+
>>>>>>
>>>>>>
>>>>>> | 1 | bacula-pool-file | 0 | 0 |
>>>>>> Backup | ${Client}_${NumVols:p/6/0/r}.volume |
>>>>>> | 2 | bacula-pool-tape | 0 | 0 |
>>>>>> Backup | B${NumVols:p/5/0/r} |
>>>>>> | 3 | bacula-pool-file-full | 0 | 0 |
>>>>>> Backup | ${Client}_${Level:l}_${NumVols:p/6/0/r}.volume |
>>>>>> | 4 | bacula-pool-file-differential | 0 | 0 |
>>>>>> Backup | ${Client}_${Level:l}_${NumVols:p/6/0/r}.volume |
>>>>>> | 5 | bacula-pool-file-incremental | 0 | 0 |
>>>>>> Backup | ${Client}_${Level:l}_${NumVols:p/6/0/r}.volume |
>>>>>> | 6 | bacula-pool-file-catalog | 0 | 0 |
>>>>>> Backup | ${Client}_${Level:l}_${NumVols:p/6/0/r}.volume |
>>>>>> | 7 | bacula-pool-tape-full | 0 | 0 |
>>>>>> Backup | B${NumVols:p/5/0/r} |
>>>>>> | 8 | bacula-pool-tape-differential | 0 | 0 |
>>>>>> Backup | B${NumVols:p/5/0/r} |
>>>>>> | 9 | bacula-pool-tape-incremental | 1 | 0 |
>>>>>> Backup | B${NumVols:p/5/0/r} |
>>>>>> | 10 | bacula-pool-tape-catalog | 0 | 0 |
>>>>>> Backup | B${NumVols:p/5/0/r} |
>>>>>> | 11 | Scratch | 0 | 0 |
>>>>>> Backup | * |
>>>>>> +--------+-------------------------------+---------+---------+----------+------------------------------------------------+
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Aaron Knister wrote:
>>>>>>> What does a list pool show?
>>>>>>>
>>>>>>> Dragos Gheorghe wrote:
>>>>>>>> my setup worked ok both on scheduled jobs and bconsole run
>>>>>>>> command, until today and for a couple of months now (on bacula
>>>>>>>> 2 from 2 weeks)
>>>>>>>> im working on Version: 2.0.1 (12 January 2007)
>>>>>>>> i686-pc-linux-gnu redhat
>>>>>>>> compiled from source on centos 4
>>>>>>>>
>>>>>>>> i think the problem started from canceling a label command with
>>>>>>>> "." (single dot) after trying to use that to add the volume to
>>>>>>>> another pool as well
>>>>>>>> *label
>>>>>>>> ...
>>>>>>>> 22: bacula-storage-tape-ibm-ultrium-ct2-id01
>>>>>>>> Select Storage resource (1-22): 22
>>>>>>>> Enter new Volume name: B00000
>>>>>>>> Media record for new Volume "B00000" already exists.
>>>>>>>> Enter new Volume name: Volume name must be at least one
>>>>>>>> character long.
>>>>>>>> Enter new Volume name:
>>>>>>>> Volume name must be at least one character long.
>>>>>>>> Enter new Volume name: .
>>>>>>>> *mess
>>>>>>>> You have no messages.
>>>>>>>> im not sure this is the cause
>>>>>>>>
>>>>>>>>
>>>>>>>> mount command
>>>>>>>> ....
>>>>>>>> 22: bacula-storage-tape-ibm-ultrium-ct2-id01
>>>>>>>> Select Storage resource (1-22): 22
>>>>>>>> 3905 Device "bacula-device-tape-ibm-ultrium-ct2-id01"
>>>>>>>> (/dev/nst0) open but no Bacula volume is mounted.
>>>>>>>> If this is not a blank tape, try unmounting and remounting the
>>>>>>>> Volume.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> output from btape readlabel and status
>>>>>>>> btape: btape.c:419 Volume label read correctly.
>>>>>>>>
>>>>>>>> Volume Label:
>>>>>>>> Id : Bacula 1.0 immortal
>>>>>>>> VerNo : 11
>>>>>>>> VolName : B00000
>>>>>>>> PrevVolName :
>>>>>>>> VolFile : 0
>>>>>>>> LabelType : VOL_LABEL
>>>>>>>> LabelSize : 197
>>>>>>>> PoolName : bacula-pool-tape-incremental
>>>>>>>> MediaType : bacula-mediatype-tape-lto2
>>>>>>>> PoolType : Backup
>>>>>>>> HostName : soter
>>>>>>>> Date label written: 01-Feb-2007 10:00
>>>>>>>> *status
>>>>>>>> Bacula status: file=0 block=0
>>>>>>>> Device status: BOT ONLINE IM_REP_EN file=0 block=0
>>>>>>>> btape: btape.c:1799 Device status: 645. ERR=
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> bscan also shows no errors
>>>>>>>> bscan: butil.c:283 Using device: "/dev/nst0" for reading.
>>>>>>>> 06-Feb 07:23 bscan: Ready to read from volume "B00000" on
>>>>>>>> device "bacula-device-tape-ibm-ultrium-ct2-id01" (/dev/nst0).
>>>>>>>> bscan: bscan.c:288 Using Database: bacula, User: bacula
>>>>>>>> bscan: bscan.c:426 Pool record for bacula-pool-tape-incremental
>>>>>>>> found in DB.
>>>>>>>> bscan: bscan.c:440 Pool type "Backup" is OK.
>>>>>>>> bscan: bscan.c:450 Media record for B00000 found in DB.
>>>>>>>> bscan: bscan.c:468 Media type "bacula-mediatype-tape-lto2" is OK.
>>>>>>>> bscan: bscan.c:477 VOL_LABEL: OK for Volume: B00000
>>>>>>>> ...and lots of job tests that look ok
>>>>>>>> also i tested the tape drive and tape with btape ok
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> llist media
>>>>>>>> .....
>>>>>>>> Pool: bacula-pool-tape-incremental
>>>>>>>> MediaId: 1
>>>>>>>> VolumeName: B00000
>>>>>>>> Slot: 0
>>>>>>>> PoolId: 9
>>>>>>>> MediaType: bacula-mediatype-tape-lto2
>>>>>>>> FirstWritten: 2007-02-01 10:00:06
>>>>>>>> LastWritten: 2007-02-06 04:52:00
>>>>>>>> LabelDate: 2007-02-01 10:00:06
>>>>>>>> VolJobs: 43
>>>>>>>> VolFiles: 169
>>>>>>>> VolBlocks: 2,792,562
>>>>>>>> VolMounts: 1
>>>>>>>> VolBytes: 180,153,824,256
>>>>>>>> VolErrors: 0
>>>>>>>> VolWrites: 2,792,563
>>>>>>>> VolCapacityBytes: 0
>>>>>>>> VolStatus: Append
>>>>>>>> Enabled: 1
>>>>>>>> Recycle: 1
>>>>>>>> VolRetention: 2,764,800
>>>>>>>> VolUseDuration: 0
>>>>>>>> MaxVolJobs: 0
>>>>>>>> MaxVolFiles: 0
>>>>>>>> MaxVolBytes: 0
>>>>>>>> InChanger: 0
>>>>>>>> EndFile: 168
>>>>>>>> EndBlock: 7,002
>>>>>>>> VolParts: 0
>>>>>>>> LabelType: 0
>>>>>>>> StorageId: 22
>>>>>>>> DeviceId: 0
>>>>>>>> LocationId: 0
>>>>>>>> RecycleCount: 0
>>>>>>>> InitialWrite: 0000-00-00 00:00:00
>>>>>>>> ScratchPoolId: 0
>>>>>>>> RecyclePoolId: 0
>>>>>>>> Comment: NULL
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> list volume
>>>>>>>> ....
>>>>>>>> Pool: bacula-pool-tape-incremental
>>>>>>>> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+----------------------------+---------------------+
>>>>>>>>
>>>>>>>>
>>>>>>>> | MediaId | VolumeName | VolStatus | Enabled | VolBytes
>>>>>>>> | VolFiles | VolRetention | Recycle | Slot | InChanger |
>>>>>>>> MediaType | LastWritten |
>>>>>>>> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+----------------------------+---------------------+
>>>>>>>>
>>>>>>>>
>>>>>>>> | 1 | B00000 | Append | 1 | 180,153,824,256
>>>>>>>> | 169 | 2,764,800 | 1 | 0 | 0 |
>>>>>>>> bacula-mediatype-tape-lto2 | 2007-02-06 04:52:00 |
>>>>>>>> +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+----------------------------+---------------------+
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> device is
>>>>>>>> (scsi1:A:6): 160.000MB/s transfers (80.000MHz DT, offset 127,
>>>>>>>> 16bit)
>>>>>>>> Vendor: CERTANCE Model: ULTRIUM 2 Rev: 1748
>>>>>>>> Type: Sequential-Access ANSI SCSI
>>>>>>>> revision: 03
>>>>>>>>
>>>>>>>>
>>>>>>>> any idea what this problem is about and more importantly how to
>>>>>>>> correct it?
>>>>>>>> thank you for your time
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> -------------------------------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>> Using Tomcat but need to do more? Need to support web services,
>>>>>>>> security?
>>>>>>>> Get stuff done quickly with pre-integrated technology to make
>>>>>>>> your job easier.
>>>>>>>> Download IBM WebSphere Application Server v.1.0.1 based on
>>>>>>>> Apache Geronimo
>>>>>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Bacula-users mailing list
>>>>>>>> Bacula-users@lists.sourceforge.net
>>>>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
