I believe that is the expected behavior. The mount command mounts the volume in a particular archive device. It does not perform a "load and mount" for autochangers. Notice that the mount command does not ask for a slot number, thus could not possibly know what volume to load and mount.
The short answer is to load a tape using mtx and then go into bconsole and issue the mount. Jaime Ventura wrote: > Hello, > I had to reboot my bacula server(dir and sd) and now I cant mount > the tape manually(via console) > Please have a look on the following: > > [EMAIL PROTECTED] bacula]# ./bconsole > Connecting to Director bserver:9101 > 1000 OK: bserver-dir Version: 1.38.11 (28 June 2006) > Enter a period to cancel a command. > * > *status dir > Using default Catalog name=MyCatalog DB=bacula > bserver-dir Version: 1.38.11 (28 June 2006) x86_64-redhat-linux-gnu redhat > Daemon started 30-Nov-06 12:30, 0 Jobs run since started. > > Scheduled Jobs: > Level Type Pri Scheduled Name Volume > =================================================================================== > > > Incremental Backup 10 30-Nov-06 23:05 Client1 > baculaFiles-vol0001 > Full Backup 11 30-Nov-06 23:10 BackupCatalog > baculaFiles-vol0001 > Full Backup 10 01-Dec-06 05:00 webserver02Backup > serversFiles-vol0012 > Full Backup 10 01-Dec-06 05:00 qualidadeBackup > serversFiles-vol0012 > ==== > > Running Jobs: > No Jobs running. > ==== > > Terminated Jobs: > JobId Level Files Bytes Status Finished Name > ======================================================================== > 1856 Incr 0 0 OK 29-Nov-06 23:05 Client1 > 1857 Full 1 17,178,275 OK 29-Nov-06 23:10 BackupCatalog > 1864 Incr 0 0 OK 30-Nov-06 05:06 > webserver02Backup > 1865 Incr 26 1,442,055 OK 30-Nov-06 05:07 > qualidadeBackup > > ==== > *status sd > The defined Storage resources are: > 1: File > 2: IBM-Ultrium-3 > 3: TapeLoader124T > 4: FileSERVERS > 5: FileUSERS > Select Storage resource (1-5): 3 > Connecting to Storage daemon TapeLoader124T at 193.136.60.17:9103 > > bserver-sd Version: 1.38.11 (28 June 2006) x86_64-redhat-linux-gnu redhat > Daemon started 30-Nov-06 12:30, 0 Jobs run since started. > > Running Jobs: > No Jobs running. > ==== > > Jobs waiting to reserve a drive: > ==== > > Terminated Jobs: > JobId Level Files Bytes Status Finished Name > ====================================================================== > 1856 Incr 0 0 OK 29-Nov-06 23:05 Client1 > 1857 Full 1 17,178,382 OK 29-Nov-06 23:10 > BackupCatalog > 1864 Incr 0 0 OK 30-Nov-06 05:06 > webserver02Backup > ==== > > Device status: > Autochanger "TapeLoader124T" with devices: > "IBM-Ultrium-3" (/dev/nst0) > Device "FileStorage" (/backupspace/bacula/bacula) is not open or does > not exist. > Device "FileStorageSERVERS" (/backupspaceSERVERS/bacula/servers) is not > open or does not exist. > Device "FileStorageUSERS" (/backupspace/bacula/users) is not open or > does not exist. > Device "IBM-Ultrium-3" (/dev/nst0) open but no Bacula volume is mounted. > Drive 0 is not loaded. > Total Bytes Read=0 Blocks Read=0 Bytes/block=0 > Positioned at File=0 Block=0 > ==== > > In Use Volume status: > ==== > > * > * > *mount > The defined Storage resources are: > 1: File > 2: IBM-Ultrium-3 > 3: TapeLoader124T > 4: FileSERVERS > 5: FileUSERS > Select Storage resource (1-5): 3 > Connecting to Storage daemon TapeLoader124T at 193.136.60.17:9103 ... > 3905 Device "IBM-Ultrium-3" (/dev/nst0) open but no Bacula volume is > mounted. > If this is not a blank tape, try unmounting and remounting the Volume. > *umount > The defined Storage resources are: > 1: File > 2: IBM-Ultrium-3 > 3: TapeLoader124T > 4: FileSERVERS > 5: FileUSERS > Select Storage resource (1-5): 3 > 3301 Issuing autochanger "loaded drive 0" command. > 3302 Autochanger "loaded drive 0", result: nothing loaded. > 3002 Device "IBM-Ultrium-3" (/dev/nst0) unmounted. > *mount > The defined Storage resources are: > 1: File > 2: IBM-Ultrium-3 > 3: TapeLoader124T > 4: FileSERVERS > 5: FileUSERS > Select Storage resource (1-5): 3 > 3301 Issuing autochanger "loaded drive 0" command. > 3302 Autochanger "loaded drive 0", result: nothing loaded. > 3301 Issuing autochanger "loaded drive 0" command. > 3302 Autochanger "loaded drive 0", result: nothing loaded. > 3902 Cannot mount Volume on Storage Device "IBM-Ultrium-3" (/dev/nst0) > because: > Couldn't rewind device "IBM-Ultrium-3" (/dev/nst0): ERR=dev.c:678 Rewind > error on "IBM-Ultrium-3" (/dev/nst0). ERR=No medium found. > > 3905 Device "IBM-Ultrium-3" (/dev/nst0) open but no Bacula volume is > mounted. > If this is not a blank tape, try unmounting and remounting the Volume. > *list volumes > Pool: Default > +---------+---------------------+-----------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > | MediaId | VolumeName | VolStatus | VolBytes | VolFiles | > VolRetention | Recycle | Slot | InChanger | MediaType | > LastWritten | > +---------+---------------------+-----------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > | 2 | baculaFiles-vol0001 | Append | 5,950,381,263 | 1 > | 31,536,000 | 1 | 0 | 0 | File | 2006-11-29 > 23:10:15 | > +---------+---------------------+-----------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > Pool: DefaultPoolForSERVERS > +---------+----------------------+-----------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > | MediaId | VolumeName | VolStatus | VolBytes | VolFiles > | VolRetention | Recycle | Slot | InChanger | MediaType | > LastWritten | > +---------+----------------------+-----------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > | 1 | serversFiles-vol0001 | Full | 9,999,953,959 | 2 > | 31,536,000 | 1 | 0 | 0 | File | 2006-05-31 > 23:08:31 | > | 4 | serversFiles-vol0002 | Full | 9,999,950,771 | 2 > | 31,536,000 | 1 | 0 | 0 | File | 2006-07-08 > 23:06:05 | > | 17 | serversFiles-vol0011 | Full | 9,999,973,798 | 2 > | 31,536,000 | 1 | 0 | 0 | File | 2006-11-03 > 20:38:47 | > | 18 | serversFiles-vol0012 | Append | 3,439,553,195 | 0 > | 31,536,000 | 1 | 0 | 0 | File | 2006-11-30 > 05:07:23 | > +---------+----------------------+-----------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > Pool: DefaultPoolForUSERS > No results to list. > Pool: TapePoolForSERVERS > +---------+------------+-----------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > | MediaId | VolumeName | VolStatus | VolBytes | VolFiles | > VolRetention | Recycle | Slot | InChanger | MediaType | > LastWritten | > +---------+------------+-----------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > | 8 | 000001L3 | Append | 6,880,355,048 | 12 | > 5,184,000 | 1 | 1 | 1 | Ultrium-3 | 2006-11-27 06:25:58 | > | 9 | 000002L3 | Append | 1 | 0 | > 5,184,000 | 1 | 2 | 1 | Ultrium-3 | 0000-00-00 00:00:00 | > | 10 | 000003L3 | Append | 1 | 0 | > 5,184,000 | 1 | 3 | 1 | Ultrium-3 | 0000-00-00 00:00:00 | > | 11 | 000004L3 | Append | 1 | 0 | > 5,184,000 | 1 | 4 | 1 | Ultrium-3 | 0000-00-00 00:00:00 | > +---------+------------+-----------+---------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > > > * > > > > As you can see , I try to mount the tapeloader I get the message : If > this is not a blank tape, try unmounting and remounting the Volume. > Actually, there is no tape on the drive, but still i try the umout and > then I try to mount again... without success. > By the way, the mount command takes a lot of time. > The tapeloader has a webinterface where I can see that no tape is loaded > to the drive during the process. > On /var/log/messages I get the message "kernel st0: MTSETDRVBUFFER only > allowed for root", but this message has always "been there" and the > tapeloader worked before. > Can someone help me to, at least, debug what's happening? > Thanks, > > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
