On 9/25/06, Michael Brennen <[EMAIL PROTECTED]> wrote:
Have you found the solution to this as I have the same problem with a recent cvs (10-16-2006) and I find it very annoying. In a 2 drive changer with 2 volumes loaded (both for jobs that run every day) with the needed volume in the second drive bacula unloaded both tapes and then loaded the second volume to the first drive.
I am running current CVS. Per discussion a day or so ago, I added
'Prefer Mounted Volumes = no' to my JobDefs tonight, reloaded, and ran a
couple of backups that I know use different volumes. The new parameter
made no difference; drive 0 was unloaded each time and only it was
used. Snippets from two job runs showing the unload/load of drive 0 are
below.
This only changed in the past week or so; prior to that multiple drives
were being used. Hopefully that will help isolate just what changed.
Again, as always, I will be glad to supply additional information as needed.
--
-- Michael
25-Sep 22:22 archive-dir: Start Backup JobId 51, Job= C-Archive.2006-09-25_22.22.24
25-Sep 22:22 someclient-fd: DIR and FD clocks differ by 6 seconds, FD automatically adjusting.
25-Sep 22:22 archive-sd: 3307 Issuing autochanger "unload slot 11, drive 0" command.
25-Sep 22:23 archive-sd: 3304 Issuing autochanger "load slot 10, drive 0" command.
25-Sep 22:24 archive-sd: 3305 Autochanger "load slot 10, drive 0", status is OK.
25-Sep 22:24 archive-sd: 3301 Issuing autochanger "loaded? drive 0" command.
25-Sep 22:24 archive-sd: 3302 Autochanger "loaded? drive 0", result is Slot 10.
25-Sep 22:24 archive-sd: Volume "FNI0009" previously written, moving to end of data.
25-Sep 22:26 archive-sd: Ready to append to end of Volume "FNI0009" at file=18.
25-Sep 22:26 archive-sd: Spooling data ...
25-Sep 22:30 archive-dir: Start Backup JobId 52, Job=L-Archive.2006-09-25_22.30.38
25-Sep 22:30 someotherclient-fd: DIR and FD clocks differ by -12 seconds, FD automatically adjusting.
25-Sep 22:30 archive-sd: 3301 Issuing autochanger "loaded? drive 0" command.
25-Sep 22:30 archive-sd: 3302 Autochanger "loaded? drive 0", result is Slot 10.
25-Sep 22:30 archive-sd: 3307 Issuing autochanger "unload slot 10, drive 0" command.
25-Sep 22:33 archive-sd: 3304 Issuing autochanger "load slot 11, drive 0" command.
25-Sep 22:34 archive-sd: 3305 Autochanger "load slot 11, drive 0", status is OK.
25-Sep 22:34 archive-sd: 3301 Issuing autochanger "loaded? drive 0" command.
25-Sep 22:34 archive-sd: 3302 Autochanger "loaded? drive 0", result is Slot 11.
25-Sep 22:34 archive-sd: Volume "FNI0010" previously written, moving to end of data.
25-Sep 22:35 archive-sd: Ready to append to end of Volume "FNI0010" at file=1.
25-Sep 22:35 archive-sd: Spooling data ...
John
------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
