On Wednesday 18 October 2006 10:46, John Drescher wrote: > On 9/25/06, Michael Brennen <[EMAIL PROTECTED]> wrote: > > I am running current CVS. Per discussion a day or so ago, I added > > 'Prefer Mounted Volumes = no' to my JobDefs tonight, reloaded, and ran a > > couple of backups that I know use different volumes. The new parameter > > made no difference; drive 0 was unloaded each time and only it was > > used. Snippets from two job runs showing the unload/load of drive 0 are > > below.
> Have you found the solution to this as I have the same problem with a > recent cvs (10-16-2006) and I find it very annoying. In a 2 drive changer > with 2 volumes loaded (both for jobs that run every day) with the needed > volume in the second drive bacula unloaded both tapes and then loaded the > second volume to the first drive. Kern responded to this a week or two ago and explained that the current behavior we are seeing is normal, if not optimal. I have found it to be timing dependent between jobs but there isn't a good way to predict/control it. For now there isn't much choice but to accept what it is doing and hope it is optimized later. -- -- Michael ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
