We have a 2.6 Kernel and running RHEL 4, we installed the sg3 utils, ran the modprobe sg and everything, but there is no sg under /dev. If I run the hardware browser I can see the PV-124T as /dev/sg3 and the LTO device as /dev/sg2, the backplane as /dev/sg0 and the scsi adapter as /dev/sg1 but like I said nothing under /dev with sg. You know what I'm to re-install, we got the server pre-installed and people messed with the machine prior to me loading Bacula.
Thanks for the help I appreciated it. Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -----Original Message----- From: Jaime Ventura [mailto:[EMAIL PROTECTED] Sent: 13 September, 2006 11:55 To: Janco van der Merwe Cc: Bacula Users Subject: Re: [Bacula-users] Autoloaders Did RHEL correctly detected you scsi board or did you changed the /etc/modprobe.conf? Which kernel version are you using? Jaime Ventura [Infra-estruturas e Comunicações] Rua Dr. António Bernardino de Almeida, 431 4200 - 072 Porto Telef: +351 22 834 05 00 (04) - ext. 1641 Fax: +351 22 832 11 59 e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> url: www.isep.ipp.pt <http://www.isep.ipp.pt> Janco van der Merwe wrote: > According to the Hardware browser the PV-124T is located on /dev/sg3 but > there is no sg3 under /dev..........well there is no sg and when I try to > access /dev/sg3 it just says no such device any ideas? > > When I ls /proc/scsi I get the following: > > aic79xx/ device_info scsi > > Janco v.d Merwe > Network Administrator > Dunns Stores (PTY) Ltd > Switchboard: 011 541 3000 > Direct: 011 541 3007 > Fax: 086 632 1708 > > -----Original Message----- > From: Jaime Ventura [mailto:[EMAIL PROTECTED] > Sent: 12 September, 2006 16:58 > To: Janco van der Merwe;Bacula Users > Subject: Re: [Bacula-users] Autoloaders > > weird...:P > do you have graphic interface? > run the "harware browser" (hwbroswer on the command line) > take a look on a screenshot I send as attachment. > You should see you tape loader under the "system devices". As you ca > seen in the picture mine is on /dev/sg5. > If doesn't work or if you don't have access to the "harware browser" let > me see what you have on /proc/scsi (ls /proc/scsi ) > > > > > > > > Jaime Ventura > [Infra-estruturas e Comunicações] > > Rua Dr. António Bernardino de Almeida, 431 > 4200 - 072 Porto > Telef: +351 22 834 05 00 (04) - ext. 1641 > Fax: +351 22 832 11 59 > > e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > url: www.isep.ipp.pt <http://www.isep.ipp.pt> > > > > > > > > Janco van der Merwe wrote: > >> When I run the script the following error occurs: >> >> /dev/sg* >> cannot open SCSI device '/dev/sg*' - No such file or directory >> ------------------ >> >> In the /proc/scsi/scsi : >> >> Host: scsi0 Channel: 00 Id: 08 Lun: 00 >> Vendor: DP Model: BACKPLANE Rev: 1.00 >> Type: Enclosure ANSI SCSI revision: 05 >> Host: scsi0 Channel: 02 Id: 00 Lun: 00 >> Vendor: DELL Model: PERC 5/i Rev: 1.00 >> Type: Direct-Access ANSI SCSI revision: 05 >> Host: scsi1 Channel: 00 Id: 05 Lun: 00 >> Vendor: IBM Model: ULTRIUM-TD3 Rev: 5BG2 >> Type: Sequential-Access ANSI SCSI revision: 03 >> Host: scsi1 Channel: 00 Id: 05 Lun: 01 >> Vendor: DELL Model: PV-124T Rev: 0031 >> Type: Medium Changer ANSI SCSI revision: 02 >> >> The board is a Adaptec 39160 >> >> Janco v.d Merwe >> Network Administrator >> Dunns Stores (PTY) Ltd >> Switchboard: 011 541 3000 >> Direct: 011 541 3007 >> Fax: 086 632 1708 >> >> -----Original Message----- >> From: Jaime Ventura [mailto:[EMAIL PROTECTED] >> Sent: 12 September, 2006 15:26 >> To: Janco van der Merwe;Bacula Users >> Subject: Re: [Bacula-users] Autoloaders >> >> First you need to be sure that you have the PV-124T correctly connected. >> I bought my PV-124T with a adaptec board scsi with it. >> First be sure that the board is recognized by linux. >> >> I didn't understand you message quite well. Does your cat >> /proc/scsi/scsi is something like this? >> Attached devices: >> Host: scsi0 Channel: 00 Id: 06 Lun: 00 >> Vendor: PE/PV Model: 1x2 SCSI BP Rev: 1.0 >> Type: Processor ANSI SCSI revision: 02 >> Host: scsi0 Channel: 01 Id: 06 Lun: 00 >> Vendor: PE/PV Model: 1x4 SCSI BP Rev: 1.0 >> Type: Processor ANSI SCSI revision: 02 >> Host: scsi0 Channel: 02 Id: 00 Lun: 00 >> Vendor: MegaRAID Model: LD 0 RAID1 69G Rev: 521S >> Type: Direct-Access ANSI SCSI revision: 02 >> Host: scsi0 Channel: 02 Id: 01 Lun: 00 >> Vendor: MegaRAID Model: LD 1 RAID1 286G Rev: 521S >> Type: Direct-Access ANSI SCSI revision: 02 >> Host: scsi2 Channel: 00 Id: 15 Lun: 00 >> Vendor: IBM Model: ULTRIUM-TD3 Rev: 5BG2 >> Type: Sequential-Access ANSI SCSI revision: 03 >> Host: scsi2 Channel: 00 Id: 15 Lun: 01 >> Vendor: DELL Model: PV-124T Rev: 0031 >> Type: Medium Changer ANSI SCSI revision: 02 >> >> >> Notice the 2 last scsi hosts. >> If you can get this, then your loader is correctly recognized. And If >> so, you can run the code i sent you on my previous message, in a bash >> console. >> >> If not, then probably the tapeloader isn't correctly recognized. >> What scsi board is your tapeloader connected to? >> >> Tell me what you got. >> >> >> >> >> >> >> >> >> Jaime Ventura >> [Infra-estruturas e Comunicações] >> >> Rua Dr. António Bernardino de Almeida, 431 >> 4200 - 072 Porto >> Telef: +351 22 834 05 00 (04) - ext. 1641 >> Fax: +351 22 832 11 59 >> >> e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> >> url: www.isep.ipp.pt <http://www.isep.ipp.pt> >> >> >> >> >> >> >> >> Janco van der Merwe wrote: >> >> >>> If I cat /proc/scsi/scsi the dell has an entry for the PV-124T but there is >>> no /dev/sg* >>> >>> Janco v.d Merwe >>> Network Administrator >>> Dunns Stores (PTY) Ltd >>> Switchboard: 011 541 3000 >>> Direct: 011 541 3007 >>> Fax: 086 632 1708 >>> >>> -----Original Message----- >>> From: Jaime Ventura [mailto:[EMAIL PROTECTED] >>> Sent: 12 September, 2006 14:36 >>> To: Janco van der Merwe >>> Cc: Bacula-users@lists.sourceforge.net >>> Subject: Re: [Bacula-users] Autoloaders >>> >>> Hi, Janco >>> Try this: >>> >>> #!/bin/sh >>> (for i in /dev/sg*; do >>> echo $i; >>> mtx -f $i inquiry 2>&1; >>> echo ------------------; >>> done) \ >>> | less >>> >>> Assuming is connected correctly, this will give you which /dev/sg* is >>> you loader in. >>> search in the results something like this: >>> >>> /dev/sg5 >>> Product Type: Medium Changer >>> Vendor ID: 'DELL ' >>> Product ID: 'PV-124T ' >>> Revision: '0031' >>> Attached Changer: No >>> >>> >>> Mine is on /dev/sg5, Yours may not. >>> If you get this, tell me. I can help you with the rest. >>> >>> I have also a 124T on a rhel. >>> >>> Jaime >>> >>> >>> >>> >>> >>> >>> >>> Jaime Ventura >>> [Infra-estruturas e Comunicações] >>> >>> Rua Dr. António Bernardino de Almeida, 431 >>> 4200 - 072 Porto >>> Telef: +351 22 834 05 00 (04) - ext. 1641 >>> Fax: +351 22 832 11 59 >>> >>> e-mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> >>> url: www.isep.ipp.pt <http://www.isep.ipp.pt> >>> >>> >>> >>> >>> >>> >>> >>> Janco van der Merwe wrote: >>> >>> >>> >>>> Hi, >>>> >>>> I’m going to ask a really dumb question now, so please bear with me. >>>> We just bought a Dell Power Vault 124 with a LTO 3 now the problem is >>>> that I don’t know what device the autoloader is specified in /dev. >>>> >>>> I have a nst0, nst0a, nst0l, nst0m as well as st0, st0a, st0l and >>>> st0m. At least I know what the difference between nst0 and st0 is but >>>> I don’t know which one of the rest is the autoloader ??????? >>>> >>>> The best thing is I just got to grips with Bacula and the AIT and now >>>> I have to do everything over again but this time on RHEL 4 and the >>>> Dell Autoloader, at least Bacula is easy but the hardware through a >>>> curve ball. >>>> >>>> HELP??????? >>>> >>>> Janco v.d Merwe >>>> Network Administrator >>>> Dunns Stores (PTY) Ltd >>>> Switchboard: 011 541 3000 >>>> Direct: 011 541 3007 >>>> Fax: 086 632 1708 >>>> >>>> >>>> >>>> ------------------------------------------------------------------------ >>>> ____________________________________________________________________________ >>>> This communication and any attachments are confidential and intended >>>> for the sole use of the >>>> intended recipient. Any form of copying or disclosure of this >>>> communication to any third parties >>>> without permission is prohibited. The contents of this communication >>>> and its attachments are >>>> not intended to be relied upon in law without subsequent written >>>> confirmation. As such, Dunns >>>> Stores (Pty) Ltd accept no responsibility or liability (including >>>> negligence) for the consequences >>>> of anyone acting, or not acting, on information contained therein. >>>> >>>> If you have received this communication in error please notify us >>>> immediately and destroy or >>>> delete it. >>>> ____________________________________________________________________________ >>>> >>>> >>>> ------------------------------------------------------------------------ >>>> >>>> ------------------------------------------------------------------------- >>>> Using Tomcat but need to do more? Need to support web services, security? >>>> Get stuff done quickly with pre-integrated technology to make your job >>>> easier >>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo >>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >>>> ------------------------------------------------------------------------ >>>> >>>> _______________________________________________ >>>> Bacula-users mailing list >>>> Bacula-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/bacula-users >>>> >>>> >>>> >>>> >>> ____________________________________________________________________________ >>> This communication and any attachments are confidential and intended for >>> the sole use of the >>> intended recipient. Any form of copying or disclosure of this >>> communication to any third parties >>> without permission is prohibited. The contents of this communication and >>> its attachments are >>> not intended to be relied upon in law without subsequent written >>> confirmation. As such, Dunns >>> Stores (Pty) Ltd accept no responsibility or liability (including >>> negligence) for the consequences >>> of anyone acting, or not acting, on information contained therein. >>> >>> If you have received this communication in error please notify us >>> immediately and destroy or >>> delete it. >>> ____________________________________________________________________________ >>> >>> >>> >>> >> ____________________________________________________________________________ >> This communication and any attachments are confidential and intended for the >> sole use of the >> intended recipient. Any form of copying or disclosure of this communication >> to any third parties >> without permission is prohibited. The contents of this communication and >> its attachments are >> not intended to be relied upon in law without subsequent written >> confirmation. As such, Dunns >> Stores (Pty) Ltd accept no responsibility or liability (including >> negligence) for the consequences >> of anyone acting, or not acting, on information contained therein. >> >> If you have received this communication in error please notify us >> immediately and destroy or >> delete it. >> ____________________________________________________________________________ >> >> >> > > > > ____________________________________________________________________________ > This communication and any attachments are confidential and intended for the > sole use of the > intended recipient. Any form of copying or disclosure of this communication > to any third parties > without permission is prohibited. The contents of this communication and its > attachments are > not intended to be relied upon in law without subsequent written > confirmation. As such, Dunns > Stores (Pty) Ltd accept no responsibility or liability (including negligence) > for the consequences > of anyone acting, or not acting, on information contained therein. > > If you have received this communication in error please notify us immediately > and destroy or > delete it. > ____________________________________________________________________________ > > > ____________________________________________________________________________ This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. ____________________________________________________________________________ ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
