|
Before I go any further in building this environment, I
wanted to see if anyone has any experience with the following configuration or
similar. Sun e480 running Solaris 10 OS Sun storedge L180 fiber attached autochanger with 6 LTO2 fibre
attached drives. The 6 drives are connected though brocade 3850 switches The robot is directly connected to fibre hba I’m not entirely sure how to configure Solaris to
control the autochanger and tape drives. I’m assuming I can use MTX, but I
can’t seem to find any documentation on how to set this up in Solaris.
The sun documentation mostly refers to legato and veritas procedures and they
are not helping at all. Any help would be greatly appreciated. Thanks Brian |
- [Bacula-users] bacula on solaris 10 with fibre attached li... Waldock, Brian
