Am 11.05.2006 um 17:46 schrieb Waldock, Brian:
Before I go any further in building this environment, I wanted to
see if anyone has any experience with the following configuration
or similar.
Sun e480 running Solaris 10 OS
Sun storedge L180 fiber attached autochanger with 6 LTO2 fibre
attached drives.
The 6 drives are connected though brocade 3850 switches
The robot is directly connected to fibre hba
We have two NEO 4000 autochangers with four LTO-2/3 drives, connected
via a brocade 200e to a fire v240. All I did on the OS side was
"touch /reconfigure; reboot" to make Solaris 10 recognize the
devices. The changer showed up at /dev/scsi/changer/<long number>,
the drives as /dev/rmt/0cbn or alike.
We use standard mtx to change tapes, with a slightly adjusted mtx-
changer driver. Simply download the mtx tarball, build it and your
done. After that you should be able to do "mtx -f /dev/scsi/
changer/..... status"
I’m not entirely sure how to configure Solaris to control the
autochanger and tape drives. I’m assuming I can use MTX, but I
can’t seem to find any documentation on how to set this up in
Solaris. The sun documentation mostly refers to legato and veritas
procedures and they are not helping at all. Any help would be
greatly appreciated.
Thanks
Brian
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
