[Bacula-users] Running Jobs simultaneously on two streamers of same type

[Christoff Buch]

Hi "listers",

I'm trying to do the following:

I have a backup - server with bacula 1.38.5 which controls two built-in SLR-100 streamers.
There is rsynced data, that is transferred to the hdd of the backup-server and backed up from there to the two streamers. It's a single rsynced file for each job.
There are 5 jobs.
4 of them go to, say, Drive1.
1 of them (very large, see Job "No. 4" below) goes to Drive2.
I want this to happen parallel, because there are two drives so why don't use them simultaneously....
The problem is, they just don't go simultaneously. Any help would be highly appreciated!

What I configured is:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
bacula-fd.conf:

FileDaemon {                          # this is me
  Name = savery-fd
  FDport = 9102                  # where we listen for the director
  WorkingDirectory = /usr/local/bacula/working
  Pid Directory = /var/run
  Maximum Concurrent Jobs = 20
}
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
bacula-sd.conf: (No data spooling!)

Storage {                             # definition of myself
  Name = savery-sd
  SDPort = 9103                  # Director's port
  WorkingDirectory = "/usr/local/bacula/working"
  Pid Directory = "/var/run"
  Maximum Concurrent Jobs = 20

}
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
bacula-dir.conf: (No data spooling!)

Director {                            # define myself
  Name = savery-dir
  ....
  Maximum Concurrent Jobs = 2
  ....
}
.....

Client {
  Name = savery-fd
  Address = savery
  .....
  Maximum Concurrent Jobs = 2   # All Jobs are synced and taken from savery, but should go on Drive1 and Drive2 simultaneously.
}
....

Storage {
  Name = Tape1
  Address = savery                # N.B. Use a fully qualified name here
  .....
  Device = SLR1                     # must be same as Device in Storage daemon
  Media Type = SLR100               # must be same as MediaType in Storage daemon
  Maximum Concurrent Jobs = 1       # One Job at a time to this Streamer.
}

Storage {
  Name = Tape2                          # externes SLR-Laufwerk
  Address = savery                      # N.B. Use a fully qualified name here
  .......
  Device = SLR2                         # must be same as Device in Storage daemon
  Media Type = SLR100                   # must be same as MediaType in Storage daemon
  Maximum Concurrent Jobs = 1           # One Job at a time to this Streamer.
}
....

Job {
  Name = "No.1"
  Jobdefs = "DefaultJob"
  Client = savery-fd
  FileSet = "For No.1"
  Storage = Tape1
  Pool = Default1
  Schedule = "DailyCycle"
  Priority = 8
  RunBeforeJob = "/usr/local/bacula/scripts/baculamount.sh"
}

Job {
  Name = "No.2"
  JobDefs = "DefaultJob"
  Client = savery-fd
  FileSet = "For No.2"
  Storage = Tape1
  Pool = Default1
  Schedule = "DailyCycle"
  Priority = 9
}

Job {
  Name = "No.3"
  JobDefs = "DefaultJob"
  Client = savery-fd
  FileSet = "For No.3"
  Storage = Tape1
  Pool = Default1
  Schedule = "DailyCycle"
  Priority = 10
}


Job {
  Name = "No.4"
  JobDefs = "DefaultJob"
  Client = savery-fd
  FileSet = "For No.4"
  Storage = Tape2
  Pool = Default2
  Schedule = "DailyCycle_pool2"
  Priority = 8
}


Job {
  Name = "No.5"                # This is the backup of the catalog.
  JobDefs = "DefaultJob"
  Level = Full
  FileSet="Catalog"
  Storage = Tape1
  Pool = Default1
  Priority = 11
  Schedule = "WeeklyCycleAfterBackup"
}

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Kind Regards,

i. A. Christoff Buch

=====================================
[EMAIL PROTECTED]
OneVision Software AG
Dr.-Leo-Ritter-Str. 9
93049 Regensburg