Thanks Attila. I'll give it a try with the priorities. Tomorrow more about it.
But if priorities really are system-wide, I don't see any sense in them, because then I'll have to organize jobs all via schedules.
Attila Fülöp <[EMAIL PROTECTED]> wrote on 29.03.2006 18:33:23:
> Christoff Buch wrote:
> > Hi "listers",
> >
> > I'm trying to do the following:
> >
> > I have a backup - server with bacula 1.38.5 which controls two built-in
> > SLR-100 streamers.
> > There is rsynced data, that is transferred to the hdd of the backup-server
> > and backed up from there to the two streamers. It's a single rsynced file
> > for each job.
> > There are 5 jobs.
> > 4 of them go to, say, Drive1.
> > 1 of them (very large, see Job "No. 4" below) goes to Drive2.
> > I want this to happen parallel, because there are two drives so why don't
> > use them simultaneously....
> > The problem is, they just don't go simultaneously. Any help would be
> > highly appreciated!
>
> You have to give your jobs the same priority. A job with Priority = 9
> will wait for the Priority = 8 job to finish, regardless of the storage
> assigned. So priorities are system wide, not storage wide.
>
>
> >
> > What I configured is:
> > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> > - - - - - - - - - - -
> > bacula-fd.conf:
> >
> > FileDaemon { # this is me
> > Name = savery-fd
> > FDport = 9102 # where we listen for the director
> > WorkingDirectory = /usr/local/bacula/working
> > Pid Directory = /var/run
> > Maximum Concurrent Jobs = 20
> > }
> > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> > - - - - - - - - - - -
> >
> > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> > - - - - - - - - - - -
> > bacula-sd.conf: (No data spooling!)
> >
> > Storage { # definition of myself
> > Name = savery-sd
> > SDPort = 9103 # Director's port
> > WorkingDirectory = "/usr/local/bacula/working"
> > Pid Directory = "/var/run"
> > Maximum Concurrent Jobs = 20
> >
> > }
> > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> > - - - - - - - - - - -
> >
> > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> > - - - - - - - - - - -
> > bacula-dir.conf: (No data spooling!)
> >
> > Director { # define myself
> > Name = savery-dir
> > ....
> > Maximum Concurrent Jobs = 2
> > ....
> > }
> > .....
> >
> > Client {
> > Name = savery-fd
> > Address = savery
> > .....
> > Maximum Concurrent Jobs = 2 # All Jobs are synced and taken from
> > savery, but should go on Drive1 and Drive2 simultaneously.
> > }
> > ....
> >
> > Storage {
> > Name = Tape1
> > Address = savery # N.B. Use a fully qualified name here
> > .....
> > Device = SLR1 # must be same as Device in Storage
> > daemon
> > Media Type = SLR100 # must be same as MediaType in Storage
> > daemon
> > Maximum Concurrent Jobs = 1 # One Job at a time to this Streamer.
> > }
> >
> > Storage {
> > Name = Tape2 # externes SLR-Laufwerk
> > Address = savery # N.B. Use a fully qualified name
> > here
> > .......
> > Device = SLR2 # must be same as Device in
> > Storage daemon
> > Media Type = SLR100 # must be same as MediaType in
> > Storage daemon
> > Maximum Concurrent Jobs = 1 # One Job at a time to this
> > Streamer.
> > }
> > ....
> >
> > Job {
> > Name = "No.1"
> > Jobdefs = "DefaultJob"
> > Client = savery-fd
> > FileSet = "For No.1"
> > Storage = Tape1
> > Pool = Default1
> > Schedule = "DailyCycle"
> > Priority = 8
> > RunBeforeJob = "/usr/local/bacula/scripts/baculamount.sh"
> > }
> >
> > Job {
> > Name = "No.2"
> > JobDefs = "DefaultJob"
> > Client = savery-fd
> > FileSet = "For No.2"
> > Storage = Tape1
> > Pool = Default1
> > Schedule = "DailyCycle"
> > Priority = 9
> > }
> >
> > Job {
> > Name = "No.3"
> > JobDefs = "DefaultJob"
> > Client = savery-fd
> > FileSet = "For No.3"
> > Storage = Tape1
> > Pool = Default1
> > Schedule = "DailyCycle"
> > Priority = 10
> > }
> >
> >
> > Job {
> > Name = "No.4"
> > JobDefs = "DefaultJob"
> > Client = savery-fd
> > FileSet = "For No.4"
> > Storage = Tape2
> > Pool = Default2
> > Schedule = "DailyCycle_pool2"
> > Priority = 8
> > }
> >
> >
> > Job {
> > Name = "No.5" # This is the backup of the catalog.
> > JobDefs = "DefaultJob"
> > Level = Full
> > FileSet="Catalog"
> > Storage = Tape1
> > Pool = Default1
> > Priority = 11
> > Schedule = "WeeklyCycleAfterBackup"
> > }
> >
> > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> > - - - - - - - - - - -
> >
> > Kind Regards,
> >
> > i. A. Christoff Buch
> >
> > =====================================
> > [EMAIL PROTECTED]
> > OneVision Software AG
> > Dr.-Leo-Ritter-Str. 9
> > 93049 Regensburg
>
- Re: [Bacula-users] Running Jobs simultaneously on two strea... Attila Fülöp
- Re: [Bacula-users] Running Jobs simultaneously on two ... Christoff Buch
- Re: [Bacula-users] Running Jobs simultaneously on ... Attila Fülöp
- Re: [Bacula-users] Running Jobs simultaneously... Christoff Buch
