Dan Langille wrote (2006/02/16): > > I think my status output may be unique...
;o) > > # chio status -S > > ... > > drive 0: <ACCESS,FULL> source: <> > > The above situation represents a tape in the drive upon power up. Yes, it is typical for tape libraries, because there could happen any condition/action during power down, so libraries have to learn all information again. > > But the status gives output I do not understand: > > # ~dan/rc-chio-changer /dev/ch0 list > > 2:001150 > Sorry, all is well. The above is just Slot 2, with label 001150. Yes, if it is the only full slot (atleast learned without power interruption, however all libraries should rescan their slots after power up). I suppose that you have library with barcode reader. > I was thinking it would return just a list of slot numbers. Is that > what you expected? List should return just list of full storage slots with volume names. Usage: rc-chio-changer <changer-device> <cmd> [slot] [tape-device] [drive-index] Commands (<cmd>): unload Unloads a tape into the slot from where it was loaded. load <slot> Loads a tape from the slot <slot> (1-based). list Lists full storage slots. loaded Gives slot from where the tape was loaded (0 = empty drive). slots Gives number of available slots. Example: rc-chio-changer /dev/ch0 load 1 Loads a tape from first slot 1. Regards. -- Rudolf Cejka <cejkar at fit.vutbr.cz> http://www.fit.vutbr.cz/~cejkar Brno University of Technology, Faculty of Information Technology Bozetechova 2, 612 66 Brno, Czech Republic ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
