Is there a promise ide controller on the board? I have had serious problems
(with
the same error messages that you have posted) with some combinations of promise
ide
controllers, kernels. My solution was either to disable dma or replace the
controller with a hotpoint one.
John
--- "Jeffrey L. Taylor" <[EMAIL PROTECTED]> wrote:
> Quoting [EMAIL PROTECTED] <[EMAIL PROTECTED]>:
> > > Yes, I know. I am busily trying to determine which of the many
> > > possible problems. You left out one possible cause, wrong software,
> > > i.e., incorrect drivers.
> > I considered that but I dismissed it because I was thinking more of hard
> > errors.
> > What type of error messages are you getting?
> >
> > John
>
> an 28 15:53:49 pogo kernel: hda: dma_intr: status=0x51 { DriveReady
> SeekComplete
> Error }
> Jan 28 15:53:49 pogo kernel: hda: dma_intr: error=0x84 { DriveStatusError
> BadCRC }
> Jan 28 15:53:49 pogo kernel: ide: failed opcode was: unknown
>
> I am not clear from the message whether the controller or other entity
> is complaining about an unknown opcode or the operation that caused
> the error is uncertain.
>
> I think the problem started around the time I replaced the
> motherboard. It is an ABIT with the NFORCE2 controller chips.
>
> Jeffrey
>
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
