Quoting [EMAIL PROTECTED] <[EMAIL PROTECTED]>:
> Is there a promise ide controller on the board? I have had serious problems
> (with
> the same error messages that you have posted) with some combinations of
> promise ide
> controllers, kernels. My solution was either to disable dma or replace the
> controller with a hotpoint one.
>
> John
John,
AFAICT, it is not a Promise controller. Below are the relevant lines
from the boot log.
Jeffrey
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
NFORCE2-U400R: IDE controller at PCI slot 0000:00:09.0
NFORCE2-U400R: chipset revision 163
NFORCE2-U400R: not 100% native mode: will probe irqs later
NFORCE2-U400R: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2-U400R: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2-U400R: 0000:00:09.0 (rev a3) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC35L090AVV207-0, ATA DISK drive
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 160836480 sectors (82348 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
Probing IDE interface ide1...
hdc: no response (status = 0x90), resetting drive
hdc: Seagate STT20000A, ATAPI TAPE drive
hdd: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
libata version 1.12 loaded.
sata_nv version 0.6
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSID] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 11
ide_tape: module not supported by Novell, setting U taint flag.
ide-tape: hdc <-> ht0: Seagate STT20000A rev 8.43
ide-tape: hdc <-> ht0: 600KBps, 6*54kB buffer, 5832kB pipeline, 184ms tDSC, DMA
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 11
ata1: no device found (phy stat 00000000)
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
