Some questions:
i) Can you please post your bacula-sd.conf & bacula-dir.conf settings
for LTO drives (especially HP Ultrium-1 drives) plus additional st
options ?
Even though I don't operate any LTO drives here - you should supply the
versions of Bacula used and OS details. Otherwise, most of what other
people might send will not be very useful for you.
Thanks for your reply,
I am using bacula 1.38.2 which I compiled from source. I am using
Scientific Linux 4.2, which similar to CentOS, is built on rhel4 source
binaries.
I have had partial sucess with the "btape fill command". I issued the
follwing mt commands before starting btape:
mt -f /dev/nst1 rewind
mt -f /dev/nst1 stoptions buffer-writes async-writes read-ahead
mt -f /dev/nst1 defblksize 0
Using these commands, I can run "btape fill" without errors. It writes
~105GB to tape in 20hrs...that's less then 2mb/s ! I think the transfer
rate should be closer to 15Mbyte/s.
Note that btape thinks the rate is ~1500KB/s (ie 15MB/s). But the drive
spends most of its time idle:
Wrote blk_block=5000, dev_blk_num=4999 VolBytes=322,495,472 rate=1528.4
KB/s
Wrote blk_block=10000, dev_blk_num=9999 VolBytes=645,055,424
rate=1532.2
KB/s
Wrote blk_block=15000, dev_blk_num=14999 VolBytes=967,615,368
rate=1531.0 KB/s
I don't know the reasons, but I suspect there is definitely something
wrong - the data transfer is much too slow for a LTO device. 1.5
MBytes/second is really too slow. LTO-1 should write with much higher
speeds.
I suspect a SCSI problem, something like faulty termination, wrong
cables and resulting slower transfers than possible, or a too high
simultaneous use of the SCSI bus, for example because you've got your
disks attached to it, too.
The autochanger is the only device on the scsi bus. Next step will be
test termination & lvd cables :(
--
Chris Hunter
Systems Programmer, Astronomy, Yale University
[EMAIL PROTECTED]
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
