> Timo, you are aware that just port 9103 isn't enough, right? The > Director will tell the FD which SD to dsend data to, and the client will > send data directly to the SD. So that port needs to be open too. I'd > play safe and open 9101-9103, then try it again and see if it works like > that. Also enable the heartbeat for that client. > According to the diagram on page 24 of 1.36.3 manual, port 9103 should be enough for connections opened by file daemon (which is now the only part of Bacula that is located in dmz). At least in my configuration, connections opened from lan to dmz are not limited, but allowed by default.
Actually, it seems to be enought in practice, too. The backup started ok, and tape drive was running so data was obviously being backed up for 15 minutes... until the timeout (that's another story). -- TiN ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
