I updated my bacula to the latest version in the
repository last night built and installed that
version. I tried a simple dvd backup but the label
command still fails to complete even with rw media.
The new problem is the operation never completes (well
it was running for about 10 minutes at last check).
Here is the label command taken from the
gnome-console:
label
The defined Storage resources are:
1: File
2: DVD
Select Storage resource (1-2): 2
Enter new Volume name: DVD0001
Automatically selected Pool: Default
Connecting to Storage daemon DVD at jmd0:9103 ...
Sending label command for Volume "DVD0001" Slot 0 ...
End of Volume "DVD0001" at 0:0 on device "DVD-WRITER"
(/dev/dvd) (part_size=0, free_space=0,
free_space_errno=0).
Remaining free space 0 on "DVD-WRITER" (/dev/dvd)
CatReq Job=*System* UpdateMedia VolName=DVD0001
VolJobs=1 VolFiles=0 VolBlocks=0 VolBytes=0
VolMounts=0 VolErrors=0 VolWrites=0 MaxVolBytes=0
EndTime=1129728446 VolStatus=Full Slot=0 relabel=0
InChanger=0 VolReadTime=0 VolWriteTime=0 VolParts=0
And the error log (from the terminal):
jmd0-sd: label.c:71 Enter read_volume_label
device="DVD-WRITER" (/dev/dvd) vol=DVD0001
dev_Vol=*NULL*
jmd0-sd: dev.c:655 rewind_dev fd=8 "DVD-WRITER"
(/dev/dvd)
jmd0-sd: dvd.c:544 Enter lseek_dev fd=8 part=0
nparts=0
jmd0-sd: dvd.c:554 lseek_dev SEEK_SET to 0
(part_start=0)
jmd0-sd: label.c:138 Big if statement in
read_volume_label
jmd0-sd: label.c:143 Requested Volume "DVD0001" on
"DVD-WRITER" (/dev/dvd) is not a Bacula labeled
Volume, because: ERR=block.c:949 Read zero bytes at
0:0 on device "DVD-WRITER" (/dev/dvd).
jmd0-sd: dev.c:655 rewind_dev fd=8 "DVD-WRITER"
(/dev/dvd)
jmd0-sd: dvd.c:544 Enter lseek_dev fd=8 part=0
nparts=0
jmd0-sd: dvd.c:554 lseek_dev SEEK_SET to 0
(part_start=0)
jmd0-sd: label.c:245 return 2
jmd0-sd: label.c:299 write_volume_label()
jmd0-sd: label.c:305 Label type=0
jmd0-sd: dev.c:655 rewind_dev fd=8 "DVD-WRITER"
(/dev/dvd)
jmd0-sd: dvd.c:544 Enter lseek_dev fd=8 part=0
nparts=0
jmd0-sd: dvd.c:554 lseek_dev SEEK_SET to 0
(part_start=0)
jmd0-sd: label.c:538 Start create_volume_label()
Volume Label:
Id : Bacula 1.0 immortal
VerNo : 11
VolName : DVD0001
PrevVolName :
VolFile : 0
LabelType : PRE_LABEL
LabelSize : 0
PoolName : Default
MediaType : DVD
PoolType : Backup
HostName : jmd0
Date label written: 19-Oct-2005 09:27
jmd0-sd: label.c:527 Created Vol label rec:
FI=PRE_LABEL len=154
jmd0-sd: label.c:341 Wrote label of 154 bytes to
"DVD-WRITER" (/dev/dvd)
jmd0-sd: label.c:344 Call write_block_to_dev()
jmd0-sd: block.c:829 ==== Just enough free space on
the device to write the current part...
jmd0-sd: dev.c:1521 weof_dev
jmd0-sd: dvd.c:342 dvd_write_part: device is
"DVD-WRITER" (/dev/dvd), part is 0, is_mounted=0
jmd0-sd: dvd.c:69 Exit make_dvd_filename:
arch=/tmp/backup/DVD0001
jmd0-sd: dvd.c:357 dvd_write_part:
cmd=/etc/bacula/dvd-handler 1 /dev/dvd
/tmp/backup/DVD0001 timeout=300
jmd0-sd: dvd.c:69 Exit make_dvd_filename:
arch=/tmp/backup/DVD0001
jmd0-sd: dvd.c:375 unlink(/tmp/backup/DVD0001)
jmd0-sd: dvd.c:78 Enter mount_dev
jmd0-sd: dvd.c:152 Device "DVD-WRITER" (/dev/dvd)
cannot be mounted. ERR=mount: wrong fs type, bad
option, bad superblock on /dev/dvd,
missing codepage or other error
In some cases useful info is found in syslog -
try
dmesg | tail or so
jmd0-sd: dvd.c:196 open_mounted_dev: got 0 files in
the mount point (not counting ., .. and .keep)
jmd0-sd: askdir.c:294 Update cat VolFiles=0
jmd0-sd: askdir.c:313 >dird: CatReq Job=*System*
UpdateMedia VolName=DVD0001 VolJobs=1 VolFiles=0
VolBlocks=0 VolBytes=0 VolMounts=0 VolErrors=0
VolWrites=0 MaxVolBytes=0 EndTime=1129728446
VolStatus=Full Slot=0 relabel=0 InChanger=0
VolReadTime=0 VolWriteTime=0 VolParts=0
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
