Hello On Wed, 2005-10-19 at 16:12 +0200, Arno Lehmann wrote: > John, > > On 19.10.2005 15:40, [EMAIL PROTECTED] wrote: > > > I updated my bacula to the latest version in the > > repository last night built and installed that > > version. I tried a simple dvd backup but the label > > command still fails to complete even with rw media. > > The new problem is the operation never completes (well > > it was running for about 10 minutes at last check). > > > > I suggest you don't use the label command, but rather let bacula label > volumes as needed. That's what I've been testing with and this works here.
I use the label command here, and it works. I think your are not using correctly the new dvd-handler scripts (That's not your fault as the default bacula-sd.conf is wrong, and the documentation has not been updated yet). You should have these lines in bacula-sd.conf: WritePartCommand = "/etc/bacula/dvd-handler %a write %e %v" FreeSpaceCommand = "/etc/bacula/dvd-handler %a free" Note the new dvd-handler script requires a patched version of dvd +rw-tools. The patch can be found in the "patches" directory of bacula sources. Thank you for following the CVS HEAD. Best regards, Nicolas ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
