OK, a little more info on this weird occurrence. I unmounted the tape in the drive (0010), and mounted the next one (0011). I then initiated a job, and Bacula unloaded 0011 and loaded 0010 again. But it forwarded to the end of the data, and wrote it all just fine.
Do I have a weird one-time glitch? A failing tape? Something else? Here's the report: 05-Oct 14:24 herodotus-dir: Start Backup JobId 6958, Job=BackupCatalog.2005-10-05_14.24.24 05-Oct 14:24 herodotus-sd: 3301 Issuing autochanger "loaded drive 0" command. 05-Oct 14:24 herodotus-sd: 3302 Autochanger "loaded drive 0", result is Slot 11. 05-Oct 14:24 herodotus-sd: 3303 Issuing autochanger "unload slot 11, drive 0" command. 05-Oct 14:25 herodotus-sd: 3304 Issuing autochanger "load slot 10, drive 0" command. 05-Oct 14:27 herodotus-sd: 3305 Autochanger "load slot 10, drive 0", status is OK. 05-Oct 14:27 herodotus-sd: Volume "BaculaTape-0010-20041213" previously written, moving to end of data. 05-Oct 14:28 herodotus-sd: Ready to append to end of Volume "BaculaTape-0010-20041213" at file=14. 05-Oct 14:28 herodotus-sd: Spooling data ... 05-Oct 14:28 herodotus-sd: Committing spooled data to Volume. Despooling 196,025,365 bytes ... 05-Oct 14:28 herodotus-sd: Sending spooled attrs to the Director. Despooling 14,759 bytes ... 05-Oct 14:28 herodotus-dir: Bacula 1.36.1 (26Nov04): 05-Oct-2005 14:28:33 JobId: 6958 Job: BackupCatalog.2005-10-05_14.24.24 Backup Level: Full Client: herodotus-fd FileSet: "Catalog" 2005-01-14 05:34:01 Pool: "Default" Storage: "herodotus-sd" Start time: 05-Oct-2005 14:24:26 End time: 05-Oct-2005 14:28:33 FD Files Written: 53 SD Files Written: 53 FD Bytes Written: 195,799,314 SD Bytes Written: 195,805,757 Rate: 792.7 KB/s Software Compression: None Volume name(s): BaculaTape-0010-20041213 Volume Session Id: 762 Volume Session Time: 1126137632 Last Volume Bytes: 13,195,091,792 Non-fatal FD errors: 0 SD Errors: 0 FD termination status: OK SD termination status: OK Termination: Backup OK 05-Oct 14:28 herodotus-dir: Begin pruning Jobs. 05-Oct 14:28 herodotus-dir: No Jobs found to prune. 05-Oct 14:28 herodotus-dir: Begin pruning Files. 05-Oct 14:28 herodotus-dir: No Files found to prune. 05-Oct 14:28 herodotus-dir: End auto prune. j----- k----- On Wednesday 05 October 2005 10:11, Joshua Kugler wrote: > I sent this yesterday and got no replies. I'll try to include more detail > this time. > > Server version (SD and Dir): 1.36.1 > Client version(s): 1.36.0 (on all: Linux, Mac, Windows) > This error is being generated from Windows, Mac, and Linux clients > > This error suddenly popped up, with no changes to a working config. > > The tape in the drive has a VolStatus of Append, and it only has about 13GB > written to it (these tapes can do about 50GB). There are other empty > (Purged) tapes waiting to be used. But, I'm getting this error in my > failing jobs: > > 04-Oct 01:05 herodotus-sd: Spooling data ... > 04-Oct 01:05 herodotus-sd: Committing spooled data to Volume. Despooling > 64,192,154 bytes ... > 04-Oct 01:05 herodotus-sd: elive.2005-10-04_01.05.04 Fatal error: Cannot > write block. Device at EOM. > 04-Oct 01:05 herodotus-sd: Sending spooled attrs to the Director. > Despooling 4,400 bytes ... > 04-Oct 01:05 elive-fd: elive.2005-10-04_01.05.04 Fatal error: Bad status > 102 returned from Storage Daemon. > 04-Oct 01:05 herodotus-dir: elive.2005-10-04_01.05.04 Error: Bacula 1.36.1 > (26Nov04): 04-Oct-2005 01:05:08 > > What is a bad status 102? > > If device at EOM, why doesn't it just go on to the next tape? Do I need to > manually eject and mount the next one (i.e. is Bacula "stuck")? Or is > there something more nefarious that I need to root out here? > > But then, even more oddly, the rest of the job report says: > > FD Files Written: 53 > SD Files Written: 53 > FD Bytes Written: 184,446,667 > SD Bytes Written: 184,453,110 > . > . > . > Last Volume Bytes: 12,999,102,895 > > How is it writing if it keeps hitting EOM? Last Volume Bytes is not > increasing across jobs. > > BTW, I did a google search for this error, and didn't find anything. GMAME > isn't working right now: when I try to search, it says: "No such group: > gmane.comp.sysutils.backup.bacula.general" even though it lists it here: > http://news.gmane.org/search.php?match=bacula > > I tried to look in the manual for the error codes, but didn't find > anything. > > Any other details I need to post to help out? Thanks for any tips you can > give. > > j----- k----- -- Joshua Kugler CDE System Administrator http://distance.uaf.edu/ ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
