Re: [Bacula-users] Bacula problems on FreeBSD 5.4

[Ole]

Hi again! No, I'm currently testing bacula on an old  intel i386 system. Copy of dmesg with the GENERIC core: testbox1# dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994         The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE-p5 #1: Mon Jul 25 12:00:41 CEST 2005    Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Celeron (900.01-MHz 686-class CPU)   Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10   Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory  = 535822336 (511 MB) avail memory = 518877184 (494 MB) npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xd6000000-0xd607ffff,0xd0000000-0xd3ffffff irq 5 at device 2.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9000-0x907f mem 0xd5000000-0xd500007f irq 12 at device 9.0 on pci1 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:04:75:e1:59:cf atapci0: <HighPoint HPT372 UDMA133 controller> port 0xa400-0xa4ff,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 irq 11 at device 10.0 on pci1 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xd5001000-0xd500107f irq 10 at device 11.0 on pci1 miibus1: <MII bus> on xl1 ukphy1: <Generic IEEE 802.3u media interface> on miibus1 ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:04:75:fd:09:4b isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci1 ata1: channel #1 on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) orm0: <ISA Option ROMs> at iomem 0xd1000-0xd17ff,0xcc000-0xcc7ff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) Timecounter "TSC" frequency 900013610 Hz quality 800 Timecounters tick every 10.000 msec acd0: CDROM <HL-DT-ST CD-ROM GCR-8522B/1.02> at ata0-master PIO4 ad4: 38204MB <SAMSUNG SP0411N/TW100-08> [77622/16/63] at ata2-master UDMA133 ad6: 38204MB <SAMSUNG SP0411N/TW100-08> [77622/16/63] at ata3-master UDMA133 ar0: 38204MB <ATA RAID1 array> [4870/255/63] status: READY subdisks:  disk0 READY on ad4 at ata2-master  disk1 READY on ad6 at ata3-master Mounting root from ufs:/dev/ar0s1a pid 391 (bacula-dir), uid 0: exited on signal 10 (core dumped) pid 450 (bacula-dir), uid 0: exited on signal 10 (core dumped) pid 10623 (bacula-dir), uid 0: exited on signal 10 (core dumped) pid 10789 (bacula-dir), uid 0: exited on signal 10 (core dumped) pid 10814 (bacula-dir), uid 0: exited on signal 10 (core dumped) pid 39096 (bacula-dir), uid 0: exited on signal 10 (core dumped) Can it be that bacula has problems reading from and to the RAID contrller ? Other thought to what the problem can be is also appreciated. ____________________ Ole Morken System Technician WebDeal AS Kern Sibbald wrote: On Monday 25 July 2005 15:17, Ole wrote: Hi! I have installed bacula from the ports tree on a server running FreeBSD 5.4. The version of bacula i use is bacula 1.36.3 I have tried to use a custom core and the default core, but i get the same message when i try to start Bacula from the startupscript in /usr/local/etc/rc.d I have not altered the standard config-files, these have worked on a SUSE-system without any hiccups. The errormessages is this: Starting the Bacula Storage daemon Starting the Bacula Director daemon Bus error (core dumped) I currently haven't connected a tape-device on the server, just trying to create backups on disk. Does anyone have any suggestions for a solution ? A bus error, typically indicates a misaligned structure on non-Intel hardware which is much more sensitive to structure alignments. Are you using non-Intel hardware or some 64 bit architecture? If so, there is a potential compiler/header problem -- e.g. using 32 bit headers on a 64 bit architecture could cause a structure misalignment as most 64 bit integers must be aligned on a 64 bit memory boundry and not on a 32 bit boundry. ____________________ Ole Morken System Technician WebDeal AS ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users