|
For what it's worth, I'm running it on FreeBSD 5.4 and it's
working fine. I didn't think Bacula wrote directly to the hardware when
you use disk devices...but I could be wrong. I had problems similar to
this with another program, turned out my RAM wasn't fully supported by the
motherboard...the system would run fine until this one program (which escapes me
at the moment) would run, then that program would core dump. Just a
thought...
--Brian From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ole Sent: Monday, July 25, 2005 9:46 To: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Bacula problems on FreeBSD 5.4 No, I'm currently testing bacula on an old intel i386 system. Copy of dmesg with the GENERIC core: testbox1# dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE-p5 #1: Mon Jul 25 12:00:41 CEST 2005 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Celeron (900.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 535822336 (511 MB) avail memory = 518877184 (494 MB) npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xd6000000-0xd607ffff,0xd0000000-0xd3ffffff irq 5 at device 2.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9000-0x907f mem 0xd5000000-0xd500007f irq 12 at device 9.0 on pci1 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:04:75:e1:59:cf atapci0: <HighPoint HPT372 UDMA133 controller> port 0xa400-0xa4ff,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 irq 11 at device 10.0 on pci1 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xd5001000-0xd500107f irq 10 at device 11.0 on pci1 miibus1: <MII bus> on xl1 ukphy1: <Generic IEEE 802.3u media interface> on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:04:75:fd:09:4b isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci1 ata1: channel #1 on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) orm0: <ISA Option ROMs> at iomem 0xd1000-0xd17ff,0xcc000-0xcc7ff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) Timecounter "TSC" frequency 900013610 Hz quality 800 Timecounters tick every 10.000 msec acd0: CDROM <HL-DT-ST CD-ROM GCR-8522B/1.02> at ata0-master PIO4 ad4: 38204MB <SAMSUNG SP0411N/TW100-08> [77622/16/63] at ata2-master UDMA133 ad6: 38204MB <SAMSUNG SP0411N/TW100-08> [77622/16/63] at ata3-master UDMA133 ar0: 38204MB <ATA RAID1 array> [4870/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad6 at ata3-master Mounting root from ufs:/dev/ar0s1a pid 391 (bacula-dir), uid 0: exited on signal 10 (core dumped) pid 450 (bacula-dir), uid 0: exited on signal 10 (core dumped) pid 10623 (bacula-dir), uid 0: exited on signal 10 (core dumped) pid 10789 (bacula-dir), uid 0: exited on signal 10 (core dumped) pid 10814 (bacula-dir), uid 0: exited on signal 10 (core dumped) pid 39096 (bacula-dir), uid 0: exited on signal 10 (core dumped) Can it be that bacula has problems reading from and to the RAID contrller ? Other thought to what the problem can be is also appreciated. ____________________ Ole Morken System Technician WebDeal ASKern Sibbald wrote: On Monday 25 July 2005 15:17, Ole wrote: |
