On Wednesday 20 July 2005 21:59, [EMAIL PROTECTED] wrote:
> Kern,
> Thanks for your reply. I am using the VSS enabled FD. Here is the output
> from status client.
Well, something is obviously wrong because the FD reports that 0 jobs have run
since it was started. I recommend you run again, then check that the number
of jobs increments. It appears you might be using the wrong client.
If you rebooted since this morning when you ran the backup, it would explain
the 0, but then I don't know what is going on -- perhaps Thorsten will have
something to say.
>
> lightning:~# echo "status client=nemo-fd" | bconsole
> Connecting to Director lightning:9101
> 1000 OK: lightning-dir Version: 1.37.30 (14 July 2005)
> Enter a period to cancel a command.
> status client=nemo-fd
> Using default Catalog name=MyCatalog DB=bacula
> Connecting to Client nemo-fd at nemo:9102
>
> nemo-fd Version: 1.37.30 (14 July 2005) VSS Windows XP MVS NT 5.1.2600
> Daemon started 20-Jul-05 15:34, 0 Jobs run since started.
> Priv 0x37f
> APIs=OPT,ATP,LPV,CFA,CFW,
> WUL,WMKD,WOP,GFAA,GFAW,GFAEA,GFAEW,SFAA,SFAW,BR,BW,SPSP,
> WC2MB,MB2WC,FFFA,FFFW,FNFA,FNFW,SCDA,SCDW,
> GCDA,GCDW
> No Terminated Jobs.
> Running Jobs:
> Director connected at: 20-Jul-05 15:39
> No Jobs running.
> ====
>
> Here's the FileSet that I'm using.
>
> FileSet {
> Name = "default-winxp"
> Enable VSS = yes
> Include {
> Options {
> signature = MD5
> }
> File = "c:/"
> }
> }
>
> Thanks,
> Thomas
>
> > From: Kern Sibbald <[EMAIL PROTECTED]>
> > Date: 2005/07/20 Wed PM 03:07:52 EDT
> > To: bacula-users@lists.sourceforge.net
> > CC: [EMAIL PROTECTED], Frederic PIERROT <[EMAIL PROTECTED]>
> > Subject: Re: [Bacula-users] Config error: Keyword EnableVSS not
> > permitted in this resource
> >
> > On Wednesday 20 July 2005 19:33, [EMAIL PROTECTED] wrote:
> > > When backing up using VSS, is it normal to receive "cannot open file"
> > > messages?
> >
> > No, you are probably not using the VSS enabled FD. Did you load
> > winbacula-vss-...? You can also tell by doing a status client=xxx
> > in the console. The signon id of the FD should contain "VSS" after
> > the Bacula version.
> >
> > In addition, when VSS is working, it will print several lines in the job
> > output, which will be rather obvious.
> >
> > > Thanks,
> > > Thomas
> > >
> > > Connecting to Director lightning:9101
> > > 1000 OK: lightning-dir Version: 1.37.30 (14 July 2005)
> > > Enter a period to cancel a command.
> > > messages
> > > 20-Jul 23:50 lightning-dir: No prior Full backup Job record found.
> > > 20-Jul 23:50 lightning-dir: No prior or suitable Full backup found.
> > > Doing FULL backup. 20-Jul 23:50 lightning-dir: Start Backup JobId 6,
> > > Job=nemo-backup.2005-07-20_23.50.04 20-Jul 23:50 lightning-sd: Volume
> > > "inc-0001" previously written, moving to end of data. 20-Jul 11:50
> > > nemo-fd: Cannot open c:/Documents and Settings/LocalService/Local
> > > Settings/Application Data/Microsoft/Windows/UsrClass.dat: ERR=The
> > > process cannot access the file because it is being used by another
> > > process. . 20-Jul 11:50 nemo-fd: Cannot open c:/Documents and
> > > Settings/LocalService/Local Settings/Application
> > > Data/Microsoft/Windows/UsrClass.dat.LOG: ERR=The process cannot access
> > > the file because it is being used by another process. .
> > > 20-Jul 11:50 nemo-fd: Cannot open c:/Documents and
> > > Settings/LocalService/NTUSER.DAT: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 11:50 nemo-fd: Cannot open c:/Documents and
> > > Settings/LocalService/ntuser.dat.LOG: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 11:50 nemo-fd: Cannot open c:/Documents and
> > > Settings/NetworkService/Local Settings/Application
> > > Data/Microsoft/Windows/UsrClass.dat: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 11:50 nemo-fd: Cannot open c:/Documents and
> > > Settings/NetworkService/Local Settings/Application
> > > Data/Microsoft/Windows/UsrClass.dat.LOG: ERR=The process cannot access
> > > the file because it is being used by another process. .
> > > 20-Jul 11:50 nemo-fd: Cannot open c:/Documents and
> > > Settings/NetworkService/NTUSER.DAT: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 11:50 nemo-fd: Cannot open c:/Documents and
> > > Settings/NetworkService/ntuser.dat.LOG: ERR=The process cannot access
> > > the file because it is being used by another process. .
> > > 20-Jul 11:50 nemo-fd: Cannot open c:/Documents and
> > > Settings/simmons/Local Settings/Application
> > > Data/Microsoft/Windows/UsrClass.dat: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 11:50 nemo-fd: Cannot open c:/Documents and
> > > Settings/simmons/Local Settings/Application
> > > Data/Microsoft/Windows/UsrClass.dat.LOG: ERR=The process cannot access
> > > the file because it is being used by another process. .
> > > 20-Jul 11:52 nemo-fd: Cannot open c:/Documents and
> > > Settings/simmons/NTUSER.DAT: ERR=The process cannot access the file
> > > because it is being used by another process. .
> > > 20-Jul 11:52 nemo-fd: Cannot open c:/Documents and
> > > Settings/simmons/ntuser.dat.LOG: ERR=The process cannot access the file
> > > because it is being used by another process. .
> > > 20-Jul 11:52 nemo-fd: Could not stat c:/pagefile.sys: ERR=The
> > > process cannot access the file because it is being used by another
> > > process.
> > >
> > > 20-Jul 11:54 nemo-fd: Cannot open c:/Program Files/Sophos SWEEP
> > > for NT/INTERCHK.CHK: ERR=The process cannot access the file because it
> > > is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/CatRoot2/edb.log: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/CatRoot2/tmp.edb: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/config/default: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/config/default.LOG: ERR=The process cannot access
> > > the file because it is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open c:/WINDOWS/system32/config/SAM:
> > > ERR=The process cannot access the file because it is being used by
> > > another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/config/SAM.LOG: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/config/SECURITY: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/config/SECURITY.LOG: ERR=The process cannot access
> > > the file because it is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/config/software: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/config/software.LOG: ERR=The process cannot access
> > > the file because it is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/config/system: ERR=The process cannot access the
> > > file because it is being used by another process. .
> > > 20-Jul 12:05 nemo-fd: Cannot open
> > > c:/WINDOWS/system32/config/system.LOG: ERR=The process cannot access
> > > the file because it is being used by another process. .
> > > 21-Jul 00:08 lightning-dir: Max Volume jobs exceeded. Marking Volume
> > > "inc-0001" as Used. 21-Jul 00:08 lightning-dir: Bacula 1.37.30
> > > (14Jul05): 21-Jul-2005 00:08:27 JobId: 6
> > > Job: nemo-backup.2005-07-20_23.50.04
> > > Backup Level: Full (upgraded from Incremental)
> > > Client: "nemo-fd" Windows XP,MVS,NT 5.1.2600
> > > FileSet: "default-winxp" 2005-07-20 23:43:56
> > > Pool: "inc-pool"
> > > Storage: "file"
> > > Scheduled time: 20-Jul-2005 23:50:03
> > > Start time: 20-Jul-2005 23:50:06
> > > End time: 21-Jul-2005 00:08:27
> > > Priority: 10
> > > FD Files Written: 33,551
> > > SD Files Written: 33,551
> > > FD Bytes Written: 4,648,197,019
> > > SD Bytes Written: 4,654,149,032
> > > Rate: 4221.8 KB/s
> > > Software Compression: None
> > > Volume name(s): inc-0001
> > > Volume Session Id: 2
> > > Volume Session Time: 1121917404
> > > Last Volume Bytes: 5,766,715,567
> > > Non-fatal FD errors: 26
> > > SD Errors: 0
> > > FD termination status: OK
> > > SD termination status: OK
> > > Termination: Backup OK -- with warnings
> > >
> > > 21-Jul 00:08 lightning-dir: Begin pruning Jobs.
> > > 21-Jul 00:08 lightning-dir: No Jobs found to prune.
> > > 21-Jul 00:08 lightning-dir: Begin pruning Files.
> > > 21-Jul 00:08 lightning-dir: No Files found to prune.
> > > 21-Jul 00:08 lightning-dir: End auto prune.
> > >
> > > > From: Frederic PIERROT <[EMAIL PROTECTED]>
> > > > Date: 2005/07/20 Wed AM 10:46:19 EDT
> > > > To: <[EMAIL PROTECTED]>
> > > > CC: bacula-users@lists.sourceforge.net
> > > > Subject: Re: [Bacula-users] Config error: Keyword EnableVSS not
> > > > permitted in this resource
> > > >
> > > > At 16:33 20/07/2005, you wrote:
> > > > >Hello everyone...again. I finally got bacula 1.37.30 compiled and
> > > > > running, and I've successfully run a test backup of the server.
> > > > > After adding "Enable VSS = yes" to a fileset resource, bacula-dir
> > > > > will no longer start and I receive the error above. I was under the
> > > > > impression that 1.37.30 had full VSS support if used with a
> > > > > vss-enabled fd, is this incorrect? Should I be using a special flag
> > > > > when running ./configure? Here's some output and my fileset
> > > > > resource.
> > > > >
> > > > >Thanks,
> > > > >Thomas
> > > > >
> > > > >FileSet {
> > > > > Name = "default-winxp"
> > > > > Include {
> > > > > Options {
> > > > > signature = MD5
> > > > > compression = GZIP
> > > > > Enable VSS = yes
> > > > > Exclude = yes
> > > > > IgnoreCase = yes
> > > > > WildDir = "[A-Z]:/Documents and Settings/*/Cookies"
> > > > > WildDir = "[A-Z]:/Documents and Settings/*/Recent"
> > > > > WildDir = "[A-Z]:/Documents and Settings/*/Local
> > > > > Settings/History" WildDir = "[A-Z]:/Documents and Settings/*/Local
> > > > > Settings/Temp" WildDir = "[A-Z]:/Documents and Settings/*/Local
> > > > > Settings/Temporary Internet Files"
> > > > > WildDir = "[A-Z]:/WINNT/Temp"
> > > > > WildDir = "[A-Z]:/temp"
> > > > > WildFile = "*.tmp"
> > > > > WildDir = "[A-Z]:/tmp"
> > > > > WildDir = "[A-Z]:/var/tmp"
> > > > > WildDir = "[A-Z]:/RECYCLER"
> > > > > WildFile = "[A-Z]:/pagefile.sys"
> > > > > WildFile = "[A-Z]:/hiberfil.sys"
> > > > > }
> > > > > File = "C:/"
> > > > > }
> > > > >}
> > > >
> > > > Enable VSS sjould be in FileSet, not in include / options
> > > > there is my working fileset (with vss) :
> > > >
> > > > FileSet {
> > > > Name = "fileset-fred"
> > > > Enable VSS = yes
> > > > Include {
> > > > Options { signature = MD5 }
> > > > File = "c:/Documents and Settings"
> > > > File = "d:/projects"
> > > > }
> > > > }
> > > >
> > > > Regards,
> > > > F.
> > > >
> > > >
> > > >
> > > > -------------------------------------------------------
> > > > SF.Net email is sponsored by: Discover Easy Linux Migration
> > > > Strategies from IBM. Find simple to follow Roadmaps, straightforward
> > > > articles, informative Webcasts and more! Get everything you need to
> > > > get up to speed, fast.
> > > > http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
> > > > _______________________________________________
> > > > Bacula-users mailing list
> > > > Bacula-users@lists.sourceforge.net
> > > > https://lists.sourceforge.net/lists/listinfo/bacula-users
> > >
> > > -------------------------------------------------------
> > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
> > > from IBM. Find simple to follow Roadmaps, straightforward articles,
> > > informative Webcasts and more! Get everything you need to get up to
> > > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
> > > _______________________________________________
> > > Bacula-users mailing list
> > > Bacula-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/bacula-users
> >
> > --
> > Best regards,
> >
> > Kern
> >
> > (">
> > /\
> > V_V
> >
> >
> > -------------------------------------------------------
> > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
> > from IBM. Find simple to follow Roadmaps, straightforward articles,
> > informative Webcasts and more! Get everything you need to get up to
> > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
> > _______________________________________________
> > Bacula-users mailing list
> > Bacula-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Best regards,
Kern
(">
/\
V_V
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
