Kern,
I did reboot the client. A test backup that I ran between the last email and 
this one shows up in the fd. When I get home tonight, I'll set everything up on 
a server there and see if I have the same issue. 

Thanks,
Thomas
> 
> From: Kern Sibbald <[EMAIL PROTECTED]>
> Date: 2005/07/20 Wed PM 04:25:28 EDT
> To: [EMAIL PROTECTED]
> CC: bacula-users@lists.sourceforge.net, 
>         Frederic PIERROT <[EMAIL PROTECTED]>
> Subject: Re: [Bacula-users] Config error: Keyword EnableVSS not  permitted in 
> this re
> 
> On Wednesday 20 July 2005 21:59, [EMAIL PROTECTED] wrote:
> > Kern,
> > Thanks for your reply. I am using the VSS enabled FD. Here is the output
> > from status client.
> 
> Well, something is obviously wrong because the FD reports that 0 jobs have 
> run 
> since it was started.  I recommend you run again, then check that the number 
> of jobs increments.  It appears you might be using the wrong client.
> 
> If you rebooted since this morning when you ran the backup, it would explain 
> the 0, but then I don't know what is going on -- perhaps Thorsten will have 
> something to say.
> 
> >
> > lightning:~# echo "status client=nemo-fd" | bconsole
> > Connecting to Director lightning:9101
> > 1000 OK: lightning-dir Version: 1.37.30 (14 July 2005)
> > Enter a period to cancel a command.
> > status client=nemo-fd
> > Using default Catalog name=MyCatalog DB=bacula
> > Connecting to Client nemo-fd at nemo:9102
> >
> > nemo-fd Version: 1.37.30 (14 July 2005) VSS Windows XP MVS NT 5.1.2600
> > Daemon started 20-Jul-05 15:34, 0 Jobs run since started.
> >  Priv 0x37f
> >  APIs=OPT,ATP,LPV,CFA,CFW,
> >  WUL,WMKD,WOP,GFAA,GFAW,GFAEA,GFAEW,SFAA,SFAW,BR,BW,SPSP,
> >  WC2MB,MB2WC,FFFA,FFFW,FNFA,FNFW,SCDA,SCDW,
> >  GCDA,GCDW
> > No Terminated Jobs.
> > Running Jobs:
> > Director connected at: 20-Jul-05 15:39
> > No Jobs running.
> > ====
> >
> > Here's the FileSet that I'm using.
> >
> >  FileSet {
> >     Name = "default-winxp"
> >     Enable VSS = yes
> >     Include {
> >       Options {
> >         signature = MD5
> >       }
> >       File = "c:/"
> >     }
> >  }
> >
> > Thanks,
> > Thomas
> >
> > > From: Kern Sibbald <[EMAIL PROTECTED]>
> > > Date: 2005/07/20 Wed PM 03:07:52 EDT
> > > To: bacula-users@lists.sourceforge.net
> > > CC: [EMAIL PROTECTED],  Frederic PIERROT <[EMAIL PROTECTED]>
> > > Subject: Re: [Bacula-users] Config error: Keyword EnableVSS not 
> > > permitted in this resource
> > >
> > > On Wednesday 20 July 2005 19:33, [EMAIL PROTECTED] wrote:
> > > > When backing up using VSS, is it normal to receive "cannot open file"
> > > > messages?
> > >
> > > No, you are probably not using the VSS enabled FD.  Did you load
> > > winbacula-vss-...?  You can also tell by doing a status client=xxx
> > > in the console.  The signon id of the FD should contain "VSS" after
> > > the Bacula version.
> > >
> > > In addition, when VSS is working, it will print several lines in the job
> > > output, which will be rather obvious.
> > >
> > > > Thanks,
> > > > Thomas
> > > >
> > > > Connecting to Director lightning:9101
> > > > 1000 OK: lightning-dir Version: 1.37.30 (14 July 2005)
> > > > Enter a period to cancel a command.
> > > > messages
> > > > 20-Jul 23:50 lightning-dir: No prior Full backup Job record found.
> > > > 20-Jul 23:50 lightning-dir: No prior or suitable Full backup found.
> > > > Doing FULL backup. 20-Jul 23:50 lightning-dir: Start Backup JobId 6,
> > > > Job=nemo-backup.2005-07-20_23.50.04 20-Jul 23:50 lightning-sd: Volume
> > > > "inc-0001" previously written, moving to end of data. 20-Jul 11:50
> > > > nemo-fd: Cannot open c:/Documents and Settings/LocalService/Local
> > > > Settings/Application Data/Microsoft/Windows/UsrClass.dat: ERR=The
> > > > process cannot access the file because it is being used by another
> > > > process. . 20-Jul 11:50 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/LocalService/Local Settings/Application
> > > > Data/Microsoft/Windows/UsrClass.dat.LOG: ERR=The process cannot access
> > > > the file because it is being used by another process. .
> > > > 20-Jul 11:50 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/LocalService/NTUSER.DAT: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 11:50 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/LocalService/ntuser.dat.LOG: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 11:50 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/NetworkService/Local Settings/Application
> > > > Data/Microsoft/Windows/UsrClass.dat: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 11:50 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/NetworkService/Local Settings/Application
> > > > Data/Microsoft/Windows/UsrClass.dat.LOG: ERR=The process cannot access
> > > > the file because it is being used by another process. .
> > > > 20-Jul 11:50 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/NetworkService/NTUSER.DAT: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 11:50 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/NetworkService/ntuser.dat.LOG: ERR=The process cannot access
> > > > the file because it is being used by another process. .
> > > > 20-Jul 11:50 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/simmons/Local Settings/Application
> > > > Data/Microsoft/Windows/UsrClass.dat: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 11:50 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/simmons/Local Settings/Application
> > > > Data/Microsoft/Windows/UsrClass.dat.LOG: ERR=The process cannot access
> > > > the file because it is being used by another process. .
> > > > 20-Jul 11:52 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/simmons/NTUSER.DAT: ERR=The process cannot access the file
> > > > because it is being used by another process. .
> > > > 20-Jul 11:52 nemo-fd:      Cannot open c:/Documents and
> > > > Settings/simmons/ntuser.dat.LOG: ERR=The process cannot access the file
> > > > because it is being used by another process. .
> > > > 20-Jul 11:52 nemo-fd:      Could not stat c:/pagefile.sys: ERR=The
> > > > process cannot access the file because it is being used by another
> > > > process.
> > > >
> > > > 20-Jul 11:54 nemo-fd:      Cannot open c:/Program Files/Sophos SWEEP
> > > > for NT/INTERCHK.CHK: ERR=The process cannot access the file because it
> > > > is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/CatRoot2/edb.log: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/CatRoot2/tmp.edb: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/config/default: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/config/default.LOG: ERR=The process cannot access
> > > > the file because it is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open c:/WINDOWS/system32/config/SAM:
> > > > ERR=The process cannot access the file because it is being used by
> > > > another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/config/SAM.LOG: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/config/SECURITY: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/config/SECURITY.LOG: ERR=The process cannot access
> > > > the file because it is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/config/software: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/config/software.LOG: ERR=The process cannot access
> > > > the file because it is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/config/system: ERR=The process cannot access the
> > > > file because it is being used by another process. .
> > > > 20-Jul 12:05 nemo-fd:      Cannot open
> > > > c:/WINDOWS/system32/config/system.LOG: ERR=The process cannot access
> > > > the file because it is being used by another process. .
> > > > 21-Jul 00:08 lightning-dir: Max Volume jobs exceeded. Marking Volume
> > > > "inc-0001" as Used. 21-Jul 00:08 lightning-dir: Bacula 1.37.30
> > > > (14Jul05): 21-Jul-2005 00:08:27 JobId:                  6
> > > >   Job:                    nemo-backup.2005-07-20_23.50.04
> > > >   Backup Level:           Full (upgraded from Incremental)
> > > >   Client:                 "nemo-fd" Windows XP,MVS,NT 5.1.2600
> > > >   FileSet:                "default-winxp" 2005-07-20 23:43:56
> > > >   Pool:                   "inc-pool"
> > > >   Storage:                "file"
> > > >   Scheduled time:         20-Jul-2005 23:50:03
> > > >   Start time:             20-Jul-2005 23:50:06
> > > >   End time:               21-Jul-2005 00:08:27
> > > >   Priority:               10
> > > >   FD Files Written:       33,551
> > > >   SD Files Written:       33,551
> > > >   FD Bytes Written:       4,648,197,019
> > > >   SD Bytes Written:       4,654,149,032
> > > >   Rate:                   4221.8 KB/s
> > > >   Software Compression:   None
> > > >   Volume name(s):         inc-0001
> > > >   Volume Session Id:      2
> > > >   Volume Session Time:    1121917404
> > > >   Last Volume Bytes:      5,766,715,567
> > > >   Non-fatal FD errors:    26
> > > >   SD Errors:              0
> > > >   FD termination status:  OK
> > > >   SD termination status:  OK
> > > >   Termination:            Backup OK -- with warnings
> > > >
> > > > 21-Jul 00:08 lightning-dir: Begin pruning Jobs.
> > > > 21-Jul 00:08 lightning-dir: No Jobs found to prune.
> > > > 21-Jul 00:08 lightning-dir: Begin pruning Files.
> > > > 21-Jul 00:08 lightning-dir: No Files found to prune.
> > > > 21-Jul 00:08 lightning-dir: End auto prune.
> > > >
> > > > > From: Frederic PIERROT <[EMAIL PROTECTED]>
> > > > > Date: 2005/07/20 Wed AM 10:46:19 EDT
> > > > > To: <[EMAIL PROTECTED]>
> > > > > CC: bacula-users@lists.sourceforge.net
> > > > > Subject: Re: [Bacula-users] Config error: Keyword EnableVSS not
> > > > >   permitted in this resource
> > > > >
> > > > > At 16:33 20/07/2005, you wrote:
> > > > > >Hello everyone...again. I finally got bacula 1.37.30 compiled and
> > > > > > running, and I've successfully run a test backup of the server.
> > > > > > After adding "Enable VSS = yes" to a fileset resource, bacula-dir
> > > > > > will no longer start and I receive the error above. I was under the
> > > > > > impression that 1.37.30 had full VSS support if used with a
> > > > > > vss-enabled fd, is this incorrect? Should I be using a special flag
> > > > > > when running ./configure? Here's some output and my fileset
> > > > > > resource.
> > > > > >
> > > > > >Thanks,
> > > > > >Thomas
> > > > > >
> > > > > >FileSet {
> > > > > >  Name = "default-winxp"
> > > > > >  Include {
> > > > > >   Options {
> > > > > >    signature = MD5
> > > > > >    compression = GZIP
> > > > > >    Enable VSS = yes
> > > > > >    Exclude = yes
> > > > > >    IgnoreCase = yes
> > > > > >    WildDir = "[A-Z]:/Documents and Settings/*/Cookies"
> > > > > >    WildDir = "[A-Z]:/Documents and Settings/*/Recent"
> > > > > >    WildDir = "[A-Z]:/Documents and Settings/*/Local
> > > > > > Settings/History" WildDir = "[A-Z]:/Documents and Settings/*/Local
> > > > > > Settings/Temp" WildDir = "[A-Z]:/Documents and Settings/*/Local
> > > > > > Settings/Temporary Internet Files"
> > > > > >    WildDir = "[A-Z]:/WINNT/Temp"
> > > > > >    WildDir = "[A-Z]:/temp"
> > > > > >    WildFile = "*.tmp"
> > > > > >    WildDir = "[A-Z]:/tmp"
> > > > > >    WildDir = "[A-Z]:/var/tmp"
> > > > > >    WildDir = "[A-Z]:/RECYCLER"
> > > > > >    WildFile = "[A-Z]:/pagefile.sys"
> > > > > >    WildFile = "[A-Z]:/hiberfil.sys"
> > > > > >   }
> > > > > >   File = "C:/"
> > > > > >  }
> > > > > >}
> > > > >
> > > > > Enable VSS sjould be in FileSet, not in include / options
> > > > > there is my working fileset (with vss) :
> > > > >
> > > > > FileSet {
> > > > >    Name = "fileset-fred"
> > > > >    Enable VSS = yes
> > > > >    Include {
> > > > >      Options { signature = MD5 }
> > > > >      File = "c:/Documents and Settings"
> > > > >      File = "d:/projects"
> > > > >    }
> > > > > }
> > > > >
> > > > > Regards,
> > > > > F.
> > > > >
> > > > >
> > > > >
> > > > > -------------------------------------------------------
> > > > > SF.Net email is sponsored by: Discover Easy Linux Migration
> > > > > Strategies from IBM. Find simple to follow Roadmaps, straightforward
> > > > > articles, informative Webcasts and more! Get everything you need to
> > > > > get up to speed, fast.
> > > > > http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
> > > > > _______________________________________________
> > > > > Bacula-users mailing list
> > > > > Bacula-users@lists.sourceforge.net
> > > > > https://lists.sourceforge.net/lists/listinfo/bacula-users
> > > >
> > > > -------------------------------------------------------
> > > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
> > > > from IBM. Find simple to follow Roadmaps, straightforward articles,
> > > > informative Webcasts and more! Get everything you need to get up to
> > > > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
> > > > _______________________________________________
> > > > Bacula-users mailing list
> > > > Bacula-users@lists.sourceforge.net
> > > > https://lists.sourceforge.net/lists/listinfo/bacula-users
> > >
> > > --
> > > Best regards,
> > >
> > > Kern
> > >
> > >   (">
> > >   /\
> > >   V_V
> > >
> > >
> > > -------------------------------------------------------
> > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
> > > from IBM. Find simple to follow Roadmaps, straightforward articles,
> > > informative Webcasts and more! Get everything you need to get up to
> > > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
> > > _______________________________________________
> > > Bacula-users mailing list
> > > Bacula-users@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/bacula-users
> 
> -- 
> Best regards,
> 
> Kern
> 
>   (">
>   /\
>   V_V
> 



-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to