Bug report now available: http://bugs.bacula.org/bug_view_advanced_page.php?bug_id=0000385
Greets from Passau/Germany!!! On Wed, 13 Jul 2005 11:23:07 +0200 Kern Sibbald <[EMAIL PROTECTED]> wrote: > Hello Bernard, > > On Wednesday 13 July 2005 10:48, Bernhard Suttner wrote: > > On Wed, 13 Jul 2005 10:44:28 +0200 > > > > Kern Sibbald <[EMAIL PROTECTED]> wrote: > > > Hello Bernhard, > > > > > > What version of Bacula are you using? > > > > > > Is there any chance that you had non-zero Slot numbers originally defined > > > for those volumes that were marked in error? > > > > Hello, > > > > I am using "bacula-1.36.3". > > No, all Slots were originally defined as zero-Slots. > > OK, thanks. There is something going on here that I don't understand. Bacula > should never crunch through your tapes marking them in error. It can do that > for the tape that is currently mounted if there is a serious error. > > Since I have not been following this in detail, and I would like to > understand > it, could you please file a bug report at bugs.bacula.org ? What is > important for me is your bacula-dir.conf and bacula-sd.conf files and as much > Bacula output that was generated as you still have that shows what was > happening while Bacula was marking your Volumes in error. > Also, if you mounted the different tapes, please indicate which ones and when > as that is not obvious from Bacula Job reports ... > > Thanks, > > Kern > > > > > > > > > > > Bernhard > > > > > On Tuesday 12 July 2005 19:25, Arno Lehmann wrote: > > > > Hello, > > > > > > > > Bernhard Suttner wrote: > > > > > On Tue, 12 Jul 2005 11:35:46 +0200 > > > > > > > > > > Arno Lehmann <[EMAIL PROTECTED]> wrote: > > > > >>Hi, > > > > >> > > > > >>Bernhard Suttner wrote: > > > > >>>No, I don´t use a autochanger. > > > > >> > > > > >>Have you configured a script to more or less automatically manage > > > > >> volume changes? Or anything in the configuration that I don't think > > > > >> about, perhaps... > > > > > > > > > > No, I think that if a volume (tape) is full it should ask for the > > > > > next volume in the pool and not mark all volumes of this pool as > > > > > Error. > > > > > > > > Absolutely right... I only tried to understand why it didn't ask but > > > > instead assumed that he volumes should be in the drive already. > > > > > > > > Anyway, your volumes listing looks rather normal. > > > > > > > > > *list volumes Pool=WeeklyPool > > > > > +---------+------------+-----------+----------------+----------+----- > > > > >---- > > > > > -----+---------+------+-----------+-----------+---------------------+ > > > > > > > > > > | MediaId | VolumeName | VolStatus | VolBytes | VolFiles | > > > > > | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten > > > > > > > > > > +---------+------------+-----------+----------------+----------+----- > > > > >---- > > > > > -----+---------+------+-----------+-----------+---------------------+ > > > > > > > > > > | 1 | FULL_01 | Full | 32,457,886,386 | 34 | > > > > > | 604,800 | 1 | 0 | 0 | AIT | 2005-07-11 > > > > > | 04:29:25 > > > > > | > > > > > | | 2 | FULL_02 | Full | 35,432,971,514 | 35 | > > > > > | | 604,800 1 | 0 | 0 | AIT | 2005-07-11 12:50:42 | > > > > > | | 3 | > > > > > | > > > > > | FULL_03 | Append | 17,663,874,444 | 20 | 604,800 | > > > > > | 1 | 0 | 0 | AIT | 2005-07-11 16:31:14 | 4 | > > > > > | FULL_04 > > > > > | > > > > > | | Error | 200 | 0 | 604,800 | 1 > > > > > | | | > > > > > | > > > > > | 0 | 0 | AIT | 2005-07-11 12:52:15 | 5 | FULL_05 | > > > > > | Error | 200 | 0 | 604,800 | 1 | > > > > > | 0 | 0 | AIT | 2005-07-11 12:52:32 | > > > > > > > > > > +---------+------------+-----------+----------------+----------+----- > > > > >---- > > > > > -----+---------+------+-----------+-----------+---------------------+ > > > > > > > > > > > > > > > > > > > > This is my the output of list volumes pool=WeeklyPool, actually. > > > > > > > > What I would do now is manually putting the "Error" volumes in a usable > > > > state again and the next time you expect a request for new media run > > > > the SD and the DIR with debug output. > > > > Capture that, and see what actually happens when bacula tries to change > > > > the volume. > > > > > > > > I only had tapes marked as Error when the tapes were actually broken or > > > > when the SD, DIR or catalog had crashed before and so the infamous (for > > > > me) "Nomber of Volumes Mismatch" Error came up... > > > > > > > > Arno > > > > > > > > >>Anyway, a list volumes pool=xxx command should give you a listing of > > > > >> the volumes you have, like > > > > >> > > > > >>>#list volumes pool=Incr > > > > >>>+---------+--------------+-----------+---------------+----------+--- > > > > >>>---- > > > > >>> -------+---------+------+-----------+-----------+------------------ > > > > >>>---+ > > > > >>> > > > > >>>| MediaId | VolumeName | VolStatus | VolBytes | VolFiles | > > > > >>>| VolRetention | Recycle | Slot | InChanger | MediaType | > > > > >>>| LastWritten > > > > >>> > > > > >>>+---------+--------------+-----------+---------------+----------+--- > > > > >>>---- > > > > >>> -------+---------+------+-----------+-----------+------------------ > > > > >>>---+ > > > > >>> > > > > >>>| 6 | DAT-120-0004 | Full | 10,838,017 | 0 | > > > > >>>| 864,000 | 1 | 0 | 0 | DDS1 | 2005-07-10 > > > > >>>| 21:36:21 > > > > >>>| > > > > >>>| | 11 | DAT-120-0009 | Append | 1 | 0 | > > > > >>>| > > > > >>>| 864,000 | 1 | 3 | 1 | DDS2 | 2005-07-12 > > > > >>>| 10:53:28 > > > > >>>| > > > > >>>| | 14 | DAT-090-0001 | Full | 2,568,189,339 | 5 | > > > > >>>| > > > > >>>| 864,000 | 1 | 0 | 0 | DDS1 | 2005-07-10 > > > > >>>| 20:16:28 > > > > >>>| > > > > >>>| | 15 | DAT-090-0002 | Full | 22,385,665 | 0 | > > > > >>>| > > > > >>>| 864,000 | 1 | 0 | 0 | DDS1 | 2005-07-10 > > > > >>>| 21:31:23 > > > > >>>| > > > > >>>| | 16 | DAT-090-0003 | Full | 255,854,574 | 0 | > > > > >>>| > > > > >>>| 864,000 | 1 | 0 | 0 | DDS1 | 2005-07-11 > > > > >>>| 10:00:30 > > > > >>>| > > > > >>>| | 25 | DAT-090-0006 | Full | 17,676,289 | 0 | > > > > >>>| > > > > >>>| 864,000 | 1 | 0 | 0 | DDS1 | 2005-07-10 > > > > >>>| 20:22:15 > > > > >> > > > > >>and here you should have InChanger=0 and Slot=0. > > > > >>Everything else should, as far as I know, not happen in your case. > > > > >> > > > > >>If there is something different, you can modify the catalog entries > > > > >>using the update command. > > > > >>Of course it would be good to know how this happened... > > > > >> > > > > >>Arno > > > > >> > > > > >>>On Tue, 12 Jul 2005 10:53:28 +0200 > > > > >>> > > > > >>>Arno Lehmann <[EMAIL PROTECTED]> wrote: > > > > >>>>Hello, > > > > >>>> > > > > >>>>Bernhard Suttner wrote: > > > > >>>>>Helo, > > > > >>>>> > > > > >>>>>I do a full backup on Tape FULL_03. After this tape is full, i get > > > > >>>>> the following messages: 11-Jul 12:50 Backup-Storage: End of > > > > >>>>> medium on Volume "FULL_03" Bytes=35,432,971,514 Blocks=549,247 at > > > > >>>>> 11-Jul-2005 12:50. 11-Jul 12:52 Backup-Storage: > > > > >>>>> ZombieBackup.2005-07-11_04.00.01 Warning: Volume "FULL_04" not on > > > > >>>>> device /dev/nst0. 11-Jul 12:52 Backup-Storage: Marking Volume > > > > >>>>> "FULL_04" in Error in Catalog. 11-Jul 12:52 Backup-Storage: > > > > >>>>> ZombieBackup.2005-07-11_04.00.01 Warning: Volume "FULL_05" not on > > > > >>>>> device /dev/nst0. 11-Jul 12:52 > > > > >>>>> Backup-Storage: Marking Volume "FULL_05" in Error in Catalog. > > > > >>>>> 11-Jul 12:53 Backup-Storage: Please mount Volume "FULL_05" on > > > > >>>>> Storage Device "AITstorage" for Job > > > > >>>>> SkipperBackup.2005-07-11_04.00.00 > > > > >>>>> > > > > >>>>>In my opinion, it should ask FULL_03 and not FULL_05 or ask bacula > > > > >>>>> the last tape in the volumes list and not the first? > > > > >>>>> > > > > >>>>>Another question, Sometimes I get the error > > > > >>>>> > > > > >>>>>11-Jul 14:07 Backup-Storage: Volume "FULL_03" previously written, > > > > >>>>> moving to end of data. 11-Jul 14:08 Backup-Storage: > > > > >>>>> ZombieBackup.2005-07-11_04.00.01 Error: I canot write on Volume > > > > >>>>> "FULL_03" because: The number of files mismatch! Volume=34 > > > > >>>>> Catalog=0 11-Jul 14:08 Backup-Storage: Marking Volume "FULL_03" > > > > >>>>> in Error in Catalog. > > > > >>>>> > > > > >>>>>I can write to the tape after i mark this tape as purged and > > > > >>>>> recycle it manually with the update command. Can bacula do this > > > > >>>>> for me automatically. > > > > >>>> > > > > >>>>This sounds like your catalog is kind of broken. > > > > >>>>Do you use an autochanger? > > > > >>>> > > > > >>>>Arno > > > > >>>> > > > > >>>>>many greetings > > > > >>>>>Bernhard > > > > >>>>> > > > > >>>>> > > > > >>>>>------------------------------------------------------- > > > > >>>>>This SF.Net email is sponsored by the 'Do More With Dual!' webinar > > > > >>>>> happening July 14 at 8am PDT/11am EDT. We invite you to explore > > > > >>>>> the latest in dual core and dual graphics technology at this free > > > > >>>>> one hour event hosted by HP, AMD, and NVIDIA. To register visit > > > > >>>>> http://www.hp.com/go/dualwebinar > > > > >>>>> _______________________________________________ > > > > >>>>>Bacula-users mailing list > > > > >>>>>Bacula-users@lists.sourceforge.net > > > > >>>>>https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > >>>> > > > > >>>>-- > > > > >>>>IT-Service Lehmann [EMAIL PROTECTED] > > > > >>>>Arno Lehmann http://www.its-lehmann.de > > > > >> > > > > >>-- > > > > >>IT-Service Lehmann [EMAIL PROTECTED] > > > > >>Arno Lehmann http://www.its-lehmann.de > > > > >> > > > > >> > > > > >>------------------------------------------------------- > > > > >>This SF.Net email is sponsored by the 'Do More With Dual!' webinar > > > > >> happening July 14 at 8am PDT/11am EDT. We invite you to explore the > > > > >> latest in dual core and dual graphics technology at this free one > > > > >> hour event hosted by HP, AMD, and NVIDIA. To register visit > > > > >> http://www.hp.com/go/dualwebinar > > > > >> _______________________________________________ > > > > >>Bacula-users mailing list > > > > >>Bacula-users@lists.sourceforge.net > > > > >>https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > > > -- > > > Best regards, > > > > > > Kern > > > > > > ("> > > > /\ > > > V_V > -- Bernhard Suttner <[EMAIL PROTECTED]> ANDURAS service solutions AG Innstraße 71 - 94036 Passau - Germany Web: www.anduras.de - Tel: +49 (0)851-4 90 50-0 - Fax: +49 (0)851-4 90 50-55 Rechtsform: Aktiengesellschaft - Sitz: Passau - Amtsgericht Passau HRB 6032 Mitglieder des Vorstands: Sven Anders, Marcus Junker, Michael Schön Vorsitzender des Aufsichtsrats: Dipl. Kfm. Thomas Träger ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
