Hi Anton,
I can only comment on it working with a Digium TE410P card
Sorry, I don't have any Sangoma cards.
Mark.
Anton wrote:
Is it only with DIGIUM cards or it works so with SANGOMA
CARDS too? Anyone tried?
On Thursday 10 July 2008 12:23, Mark Wilkinson wrote:
Hi Matthew,
I've just tested the latest svn version with 'mtp2'
instead of 'dchan' and my looped back linksets
come up without any problems.
Regards
Mark Wilkinson.
Matthew Fredrickson wrote:
TCB wrote:
I could not get C7 to get up with mtp2= on dahdi,
works fine with the good ol' dchan. Feel free to try.
Just to let you guys know, I just fixed a bug that
another developer introduced into the mtp2 code in
DAHDI last night. If you update your DAHDI version to
something newere, it should work now.
Matthew Fredrickson
On Tue, Jul 8, 2008 at 9:03 AM, Mark Wilkinson
<[EMAIL PROTECTED]> wrote:
Hello,
I'm looking for some help configuring a system to
test Asterisk's SS7 setup.
I want to have one system setup with two linksets and
a T1 cross-over cable between 2
ports on a TE410P (If this will work).
At present, I have the following configured :-
OS: CentOS 5
LibPRI, LibSS7, Dahdi, Asterisk : All from svn trunk
I'm pretty sure I have the dahdi config setup
correctly, as ports are shown as up and OK, but
I think I have a problem with the ss7 configuration
as the linksets remain down.
Can anyone point me in the right direction or tell me
if it's even possible to set up Asterisk & SS7
like this ?
Thanks In Advance
Mark.
Current config files are as follows :-
/etc/dahdi/system.conf
oadzone=uk
defaultzone=uk
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
mtp2=16
span=2,0,0,ccs,hdb3
bchan=32-46,48-62
mtp2=47
/etc/asterisk/chan_dahdi.conf
[trunkgroups]
[channels]
switchtype=euroisdn
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
group=1
callgroup=1
pickupgroup=1
signalling = ss7
ss7type = itu
ss7_called_nai=dynamic
ss7_calling_nai=dynamic
networkindicator=international
; port 1
linkset = 1
group = 1
signalling=ss7
ss7type = itu
context = default
pointcode = 2
adjpointcode = 1
defaultdpc = 1
networkindicator = international
cicbeginswith = 1
channel => 1-15
cicbeginswith = 17
channel => 17-31
sigchan = 16
; Port 2
linkset = 2
group = 2
signalling = ss7
ss7type = itu
context = default
pointcode = 1
adjpointcode = 2
defaultdpc = 2
networkindicator = international
cicbeginswith = 1
channel = 31-46
cicbeginswith = 17
channel = 48-62
sigchan = 47
_______________________________________________
--Bandwidth and Colocation Provided by
http://www.api-digital.com--
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation Provided by
http://www.api-digital.com--
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
