Oh, wait, nevermind. That's not going to work for ANSI. ss7linktest
defaults to ITU mode and I haven't written a way to change it. If
you're really feeling adventurous, you can look in ss7linktest.c and
change the ss7 type from SS7_ITU to SS7_ANSI. If you do that, and do a
`make` again, it should bring it up in ANSI mode.
Matthew Fredrickson
On Oct 18, 2006, at 4:58 PM, Jason L. Nesheim wrote:
The link won't actually come up at all. This message scrolls through
asterisk so fast that it's impossible to do anything in the CLI when I
start it. The odd part is that now that I downloaded the latest 1.4
beta 2 zaptel and installed that and rebooted the box it seems that
the messages have stopped but now asterisk is doing nothing at all
with the SS7. No messages appear in the logs relating to it and my
CopperCom sits in an activating state on the f-link. The config is
the same as before, any ideas?
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matthew
Fredrickson
Sent: Wednesday, October 18, 2006 2:15 PM
To: [email protected]
Subject: Re: [asterisk-ss7] ANSI SS7
Unless you're seeing link related problems (link doesn't come up and
those are scrolling continuously) you shouldn't worry about those
messages. MTP2 is designed to work around link layer hickups such as
this. You may see better performance though if you set your dchan to
hardhdlc instead (though that only works on the TE4xxp and TE2xxp).
Matthew Fredrickson
On Oct 18, 2006, at 12:07 PM, Jason L. Nesheim wrote:
I'm getting a strange error when I start up asterisk and I can't tell
if it's a problem with the ss7 linkset or something hardware related.
This is what asterisk outputs:
[Oct 18 12:02:16] ERROR[7160]: chan_zap.c:8273 ss7_linkset: HDLC
Abort!
This is the SS7 part of my Zapata.conf:
signalling = ss7
ss7type = ansi
linkset = 1
pointcode = 351400
adjpointcode = 351240
defaultdpc = 351240
networkindicator=national
cicbeginswith = 1001
sigchan = 1
channel = 2-24
This is from my zaptel.conf:
span=1,1,0,esf,b8zs
bchan=2-24
dchan=1
defaultzone=us
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
