Unless you're seeing link related problems (link doesn't come up and
those are scrolling continuously) you shouldn't worry about those
messages. MTP2 is designed to work around link layer hickups such as
this. You may see better performance though if you set your dchan to
hardhdlc instead (though that only works on the TE4xxp and TE2xxp).
Matthew Fredrickson
On Oct 18, 2006, at 12:07 PM, Jason L. Nesheim wrote:
I’m getting a strange error when I start up asterisk and I can’t tell
if it’s a problem with the ss7 linkset or something hardware related.
This is what asterisk outputs:
[Oct 18 12:02:16] ERROR[7160]: chan_zap.c:8273 ss7_linkset: HDLC Abort!
This is the SS7 part of my Zapata.conf:
signalling = ss7
ss7type = ansi
linkset = 1
pointcode = 351400
adjpointcode = 351240
defaultdpc = 351240
networkindicator=national
cicbeginswith = 1001
sigchan = 1
channel = 2-24
This is from my zaptel.conf:
span=1,1,0,esf,b8zs
bchan=2-24
dchan=1
defaultzone=us
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
